RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://stm32-rs.github.io/stm32-rs/STM32F0x1.html below:

STM32F0x1 Peripheral Coverage

Overall: 3867/4417 fields covered

ADC

0x40012400: Analog-to-digital converter

59/59 fields covered.

Toggle register map Toggle registers ISR

interrupt and status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields ADRDY

Bit 0: ADC ready.

Allowed values:
0: NotReady: ADC not yet ready to start conversion
1: Ready: ADC ready to start conversion

EOSMP

Bit 1: End of sampling flag.

Allowed values:
0: NotAtEnd: Not at the end of the samplings phase
1: AtEnd: End of sampling phase reached

EOC

Bit 2: End of conversion flag.

Allowed values:
0: NotComplete: Channel conversion is not complete
1: Complete: Channel conversion complete

EOSEQ

Bit 3: End of sequence flag.

Allowed values:
0: NotComplete: Conversion sequence is not complete
1: Complete: Conversion sequence complete

OVR

Bit 4: ADC overrun.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

AWD

Bit 7: Analog watchdog flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

IER

interrupt enable register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields ADRDYIE

Bit 0: ADC ready interrupt enable.

Allowed values:
0: Disabled: ADC ready interrupt disabled
1: Enabled: ADC ready interrupt enabled

EOSMPIE

Bit 1: End of sampling flag interrupt enable.

Allowed values:
0: Disabled: End of sampling interrupt disabled
1: Enabled: End of sampling interrupt enabled

EOCIE

Bit 2: End of conversion interrupt enable.

Allowed values:
0: Disabled: End of conversion interrupt disabled
1: Enabled: End of conversion interrupt enabled

EOSEQIE

Bit 3: End of conversion sequence interrupt enable.

Allowed values:
0: Disabled: End of conversion sequence interrupt disabled
1: Enabled: End of conversion sequence interrupt enabled

OVRIE

Bit 4: Overrun interrupt enable.

Allowed values:
0: Disabled: Overrun interrupt disabled
1: Enabled: Overrun interrupt enabled

AWDIE

Bit 7: Analog watchdog interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 ADCAL
r/w1s 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ADSTP
r/w1s ADSTART
r/w1s ADDIS
r/w1s ADEN
r/w1s Toggle fields ADEN

Bit 0: ADC enable command.

Allowed values:
0: Disabled: ADC disabled
1: Enabled: ADC enabled

ADDIS

Bit 1: ADC disable command.

Allowed values:
0: NotDisabling: No disable command active
1: Disabling: ADC disabling

ADSTART

Bit 2: ADC start conversion command.

Allowed values:
0: NotActive: No conversion ongoing
1: Active: ADC operating and may be converting

ADSTP

Bit 4: ADC stop conversion command.

Allowed values:
0: NotStopping: No stop command active
1: Stopping: ADC stopping conversion

ADCAL

Bit 31: ADC calibration.

Allowed values:
0: NotCalibrating: ADC calibration either not yet performed or completed
1: Calibrating: ADC calibration in progress

CFGR1

configuration register 1

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

15/15 fields covered.

Toggle fields DMAEN

Bit 0: Direct memory access enable.

Allowed values:
0: Disabled: DMA mode disabled
1: Enabled: DMA mode enabled

DMACFG

Bit 1: Direct memery access configuration.

Allowed values:
0: OneShot: DMA one shot mode
1: Circular: DMA circular mode

SCANDIR

Bit 2: Scan sequence direction.

Allowed values:
0: Upward: Upward scan (from CHSEL0 to CHSEL18)
1: Backward: Backward scan (from CHSEL18 to CHSEL0)

RES

Bits 3-4: Data resolution.

Allowed values:
0: TwelveBit: 12-bit (14 ADCCLK cycles)
1: TenBit: 10-bit (13 ADCCLK cycles)
2: EightBit: 8-bit (11 ADCCLK cycles)
3: SixBit: 6-bit (9 ADCCLK cycles)

ALIGN

Bit 5: Data alignment.

Allowed values:
0: Right: Right alignment
1: Left: Left alignment

EXTSEL

Bits 6-8: External trigger selection.

Allowed values:
0: TIM1_TRGO: Timer 1 TRGO Event
1: TIM1_CC4: Timer 1 CC4 event
2: TIM2_TRGO: Timer 2 TRGO event
3: TIM3_TRGO: Timer 3 TRGO event
4: TIM15_TRGO: Timer 15 TRGO event

EXTEN

Bits 10-11: External trigger enable and polarity selection.

Allowed values:
0: Disabled: Trigger detection disabled
1: RisingEdge: Trigger detection on the rising edge
2: FallingEdge: Trigger detection on the falling edge
3: BothEdges: Trigger detection on both the rising and falling edges

OVRMOD

Bit 12: Overrun management mode.

Allowed values:
0: Preserved: ADC_DR register is preserved with the old data when an overrun is detected
1: Overwritten: ADC_DR register is overwritten with the last conversion result when an overrun is detected

CONT

Bit 13: Single / continuous conversion mode.

Allowed values:
0: Single: Single conversion mode
1: Continuous: Continuous conversion mode

WAIT

Bit 14: Wait conversion mode.

Allowed values:
0: Disabled: Wait conversion mode off
1: Enabled: Wait conversion mode on

AUTOFF

Bit 15: Auto-off mode.

Allowed values:
0: Disabled: Auto-off mode disabled
1: Enabled: Auto-off mode enabled

DISCEN

Bit 16: Discontinuous mode.

Allowed values:
0: Disabled: Discontinuous mode on regular channels disabled
1: Enabled: Discontinuous mode on regular channels enabled

AWDSGL

Bit 22: Enable the watchdog on a single channel or on all channels.

Allowed values:
0: AllChannels: Analog watchdog enabled on all channels
1: SingleChannel: Analog watchdog enabled on a single channel

AWDEN

Bit 23: Analog watchdog enable.

Allowed values:
0: Disabled: Analog watchdog disabled on regular channels
1: Enabled: Analog watchdog enabled on regular channels

AWDCH

Bits 26-30: Analog watchdog channel selection.

Allowed values: 0x0-0x12

CFGR2

configuration register 2

Offset: 0x10, size: 32, reset: 0x00008000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CKMODE
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Toggle fields CKMODE

Bits 30-31: ADC clock mode.

Allowed values:
0: ADCCLK: Asynchronous clock mode
1: PCLK_Div2: Synchronous clock mode (PCLK/2)
2: PCLK_Div4: Sychronous clock mode (PCLK/4)

SMPR

sampling time register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SMP
rw Toggle fields SMP

Bits 0-2: Sampling time selection.

Allowed values:
0: Cycles1_5: 1.5 cycles
1: Cycles7_5: 7.5 cycles
2: Cycles13_5: 13.5 cycles
3: Cycles28_5: 28.5 cycles
4: Cycles41_5: 41.5 cycles
5: Cycles55_5: 55.5 cycles
6: Cycles71_5: 71.5 cycles
7: Cycles239_5: 239.5 cycles

watchdog threshold register

Offset: 0x20, size: 32, reset: 0x00000FFF, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 HT
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 LT
rw Toggle fields LT

Bits 0-11: Analog watchdog lower threshold.

Allowed values: 0x0-0xfff

Bits 16-27: Analog watchdog higher threshold.

Allowed values: 0x0-0xfff

CHSELR

channel selection register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields CHSEL[0]

Bit 0: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[1]

Bit 1: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[2]

Bit 2: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[3]

Bit 3: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[4]

Bit 4: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[5]

Bit 5: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[6]

Bit 6: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[7]

Bit 7: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[8]

Bit 8: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[9]

Bit 9: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[10]

Bit 10: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[11]

Bit 11: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[12]

Bit 12: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[13]

Bit 13: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[14]

Bit 14: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[15]

Bit 15: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[16]

Bit 16: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[17]

Bit 17: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

CHSEL[18]

Bit 18: Channel-x selection.

Allowed values:
0: NotSelected: Input Channel is not selected for conversion
1: Selected: Input Channel is selected for conversion

data register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DATA
r Toggle fields DATA

Bits 0-15: Converted data.

CCR

common configuration register

Offset: 0x308, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 VBATEN
rw TSEN
rw VREFEN
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Toggle fields VREFEN

Bit 22: Temperature sensor and VREFINT enable.

Allowed values:
0: Disabled: V_REFINT channel disabled
1: Enabled: V_REFINT channel enabled

TSEN

Bit 23: Temperature sensor enable.

Allowed values:
0: Disabled: Temperature sensor disabled
1: Enabled: Temperature sensor enabled

VBATEN

Bit 24: VBAT enable.

Allowed values:
0: Disabled: V_BAT channel disabled
1: Enabled: V_BAT channel enabled

CAN

0x40006400: Controller area network

82/323 fields covered.

Toggle register map Toggle registers MCR

CAN_MCR

Offset: 0x0, size: 32, reset: 0x00010002, access: read-write

0/10 fields covered.

Toggle fields INRQ

Bit 0: INRQ.

SLEEP

Bit 1: SLEEP.

TXFP

Bit 2: TXFP.

RFLM

Bit 3: RFLM.

NART

Bit 4: NART.

AWUM

Bit 5: AWUM.

ABOM

Bit 6: ABOM.

TTCM

Bit 7: TTCM.

RESET

Bit 15: RESET.

DBF

Bit 16: DBF.

MSR

CAN_MSR

Offset: 0x4, size: 32, reset: 0x00000C02, access: Unspecified

6/9 fields covered.

Toggle fields INAK

Bit 0: INAK.

SLAK

Bit 1: SLAK.

ERRI

Bit 2: ERRI.

WKUI

Bit 3: WKUI.

SLAKI

Bit 4: SLAKI.

TXM

Bit 8: TXM.

RXM

Bit 9: RXM.

SAMP

Bit 10: SAMP.

Bit 11: RX.

TSR

CAN_TSR

Offset: 0x8, size: 32, reset: 0x1C000000, access: Unspecified

7/22 fields covered.

Toggle fields RQCP[0]

Bit 0: RQCP0.

TXOK[0]

Bit 1: TXOK0.

ALST[0]

Bit 2: ALST0.

TERR[0]

Bit 3: TERR0.

ABRQ[0]

Bit 7: ABRQ0.

RQCP[1]

Bit 8: RQCP1.

TXOK[1]

Bit 9: TXOK1.

ALST[1]

Bit 10: ALST1.

TERR[1]

Bit 11: TERR1.

ABRQ[1]

Bit 15: ABRQ1.

RQCP[2]

Bit 16: RQCP2.

TXOK[2]

Bit 17: TXOK2.

ALST[2]

Bit 18: ALST2.

TERR[2]

Bit 19: TERR2.

ABRQ[2]

Bit 23: ABRQ2.

CODE

Bits 24-25: CODE.

TME[0]

Bit 26: Lowest priority flag for mailbox 0.

TME[1]

Bit 27: Lowest priority flag for mailbox 1.

TME[2]

Bit 28: Lowest priority flag for mailbox 2.

LOW[0]

Bit 29: Lowest priority flag for mailbox 0.

LOW[1]

Bit 30: Lowest priority flag for mailbox 1.

LOW[2]

Bit 31: Lowest priority flag for mailbox 2.

RF[0]R

CAN_RF0R

Offset: 0xc, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

Toggle fields FMP

Bits 0-1: FMP0.

FULL

Bit 3: FULL0.

Allowed values:
0: NotFull: FIFO x is not full
1: Full: FIFO x is full

FOVR

Bit 4: FOVR0.

Allowed values:
0: NoOverrun: No FIFO x overrun
1: Overrun: FIFO x overrun

RFOM

Bit 5: RFOM0.

Allowed values:
1: Release: Set by software to release the output mailbox of the FIFO

RF[1]R

CAN_RF1R

Offset: 0x10, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

Toggle fields FMP

Bits 0-1: FMP0.

FULL

Bit 3: FULL0.

Allowed values:
0: NotFull: FIFO x is not full
1: Full: FIFO x is full

FOVR

Bit 4: FOVR0.

Allowed values:
0: NoOverrun: No FIFO x overrun
1: Overrun: FIFO x overrun

RFOM

Bit 5: RFOM0.

Allowed values:
1: Release: Set by software to release the output mailbox of the FIFO

IER

CAN_IER

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

14/14 fields covered.

Toggle fields TMEIE

Bit 0: TMEIE.

Allowed values:
0: Disabled: No interrupt when RQCPx bit is set
1: Enabled: Interrupt generated when RQCPx bit is set

FMPIE0

Bit 1: FMPIE0.

Allowed values:
0: Disabled: No interrupt generated when state of FMP[1:0] bits are not 00
1: Enabled: Interrupt generated when state of FMP[1:0] bits are not 00b

FFIE0

Bit 2: FFIE0.

Allowed values:
0: Disabled: No interrupt when FULL bit is set
1: Enabled: Interrupt generated when FULL bit is set

FOVIE0

Bit 3: FOVIE0.

Allowed values:
0: Disabled: No interrupt when FOVR bit is set
1: Enabled: Interrupt generated when FOVR bit is set

FMPIE1

Bit 4: FMPIE1.

Allowed values:
0: Disabled: No interrupt generated when state of FMP[1:0] bits are not 00b
1: Enabled: Interrupt generated when state of FMP[1:0] bits are not 00b

FFIE1

Bit 5: FFIE1.

Allowed values:
0: Disabled: No interrupt when FULL bit is set
1: Enabled: Interrupt generated when FULL bit is set

FOVIE1

Bit 6: FOVIE1.

Allowed values:
0: Disabled: No interrupt when FOVR is set
1: Enabled: Interrupt generation when FOVR is set

EWGIE

Bit 8: EWGIE.

Allowed values:
0: Disabled: ERRI bit will not be set when EWGF is set
1: Enabled: ERRI bit will be set when EWGF is set

EPVIE

Bit 9: EPVIE.

Allowed values:
0: Disabled: ERRI bit will not be set when EPVF is set
1: Enabled: ERRI bit will be set when EPVF is set

BOFIE

Bit 10: BOFIE.

Allowed values:
0: Disabled: ERRI bit will not be set when BOFF is set
1: Enabled: ERRI bit will be set when BOFF is set

LECIE

Bit 11: LECIE.

Allowed values:
0: Disabled: ERRI bit will not be set when the error code in LEC[2:0] is set by hardware on error detection
1: Enabled: ERRI bit will be set when the error code in LEC[2:0] is set by hardware on error detection

ERRIE

Bit 15: ERRIE.

Allowed values:
0: Disabled: No interrupt will be generated when an error condition is pending in the CAN_ESR
1: Enabled: An interrupt will be generation when an error condition is pending in the CAN_ESR

WKUIE

Bit 16: WKUIE.

Allowed values:
0: Disabled: No interrupt when WKUI is set
1: Enabled: Interrupt generated when WKUI bit is set

SLKIE

Bit 17: SLKIE.

Allowed values:
0: Disabled: No interrupt when SLAKI bit is set
1: Enabled: Interrupt generated when SLAKI bit is set

ESR

CAN_ESR

Offset: 0x18, size: 32, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 REC
r TEC
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 LEC
rw BOFF
r EPVF
r EWGF
r Toggle fields EWGF

Bit 0: EWGF.

EPVF

Bit 1: EPVF.

BOFF

Bit 2: BOFF.

LEC

Bits 4-6: LEC.

Allowed values:
0: NoError: No Error
1: Stuff: Stuff Error
2: Form: Form Error
3: Ack: Acknowledgment Error
4: BitRecessive: Bit recessive Error
5: BitDominant: Bit dominant Error
6: Crc: CRC Error
7: Custom: Set by software

TEC

Bits 16-23: TEC.

REC

Bits 24-31: REC.

BTR

CAN BTR

Offset: 0x1c, size: 32, reset: 0x01230000, access: read-write

2/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 SILM
rw LBKM
rw SJW
rw TS2
rw TS1
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRP
rw Toggle fields BRP

Bits 0-9: BRP.

TS1

Bits 16-19: TS1.

TS2

Bits 20-22: TS2.

SJW

Bits 24-25: SJW.

LBKM

Bit 30: LBKM.

Allowed values:
0: Disabled: Loop Back Mode disabled
1: Enabled: Loop Back Mode enabled

SILM

Bit 31: SILM.

Allowed values:
0: Normal: Normal operation
1: Silent: Silent Mode

TIR [0]

CAN_TI0R

Offset: 0x180, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 STID
rw EXID
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EXID
rw IDE
rw RTR
rw TXRQ
rw Toggle fields TXRQ

Bit 0: TXRQ.

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

TDTR [0]

CAN_TDT0R

Offset: 0x184, size: 32, reset: 0x00000000, access: read-write

1/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 TIME
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TGT
rw DLC
rw Toggle fields DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

TGT

Bit 8: TGT.

TIME

Bits 16-31: TIME.

TDLR [0]

CAN_TDL0R

Offset: 0x188, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

TDHR [0]

CAN_TDH0R

Offset: 0x18c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

TIR [1]

CAN_TI0R

Offset: 0x190, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 STID
rw EXID
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EXID
rw IDE
rw RTR
rw TXRQ
rw Toggle fields TXRQ

Bit 0: TXRQ.

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

TDTR [1]

CAN_TDT0R

Offset: 0x194, size: 32, reset: 0x00000000, access: read-write

1/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 TIME
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TGT
rw DLC
rw Toggle fields DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

TGT

Bit 8: TGT.

TIME

Bits 16-31: TIME.

TDLR [1]

CAN_TDL0R

Offset: 0x198, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

TDHR [1]

CAN_TDH0R

Offset: 0x19c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

TIR [2]

CAN_TI0R

Offset: 0x1a0, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 STID
rw EXID
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EXID
rw IDE
rw RTR
rw TXRQ
rw Toggle fields TXRQ

Bit 0: TXRQ.

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

TDTR [2]

CAN_TDT0R

Offset: 0x1a4, size: 32, reset: 0x00000000, access: read-write

1/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 TIME
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TGT
rw DLC
rw Toggle fields DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

TGT

Bit 8: TGT.

TIME

Bits 16-31: TIME.

TDLR [2]

CAN_TDL0R

Offset: 0x1a8, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

TDHR [2]

CAN_TDH0R

Offset: 0x1ac, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

RIR [0]

CAN_RI0R

Offset: 0x1b0, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 STID
r EXID
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EXID
r IDE
r RTR
r Toggle fields RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

RDTR [0]

CAN_RDT0R

Offset: 0x1b4, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 TIME
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FMI
r DLC
r Toggle fields DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

FMI

Bits 8-15: FMI.

TIME

Bits 16-31: TIME.

RDLR [0]

CAN_RDL0R

Offset: 0x1b8, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

Toggle fields DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

RDHR [0]

CAN_RDH0R

Offset: 0x1bc, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

Toggle fields DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

RIR [1]

CAN_RI0R

Offset: 0x1c0, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 STID
r EXID
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EXID
r IDE
r RTR
r Toggle fields RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

RDTR [1]

CAN_RDT0R

Offset: 0x1c4, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 TIME
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FMI
r DLC
r Toggle fields DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

FMI

Bits 8-15: FMI.

TIME

Bits 16-31: TIME.

RDLR [1]

CAN_RDL0R

Offset: 0x1c8, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

Toggle fields DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

RDHR [1]

CAN_RDH0R

Offset: 0x1cc, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

Toggle fields DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

FMR

CAN_FMR

Offset: 0x200, size: 32, reset: 0x2A1C0E01, access: read-write

0/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CAN2SB
rw FINIT
rw Toggle fields FINIT

Bit 0: FINIT.

CAN2SB

Bits 8-13: CAN2SB.

FM1R

CAN_FM1R

Offset: 0x204, size: 32, reset: 0x00000000, access: read-write

0/28 fields covered.

Toggle fields FBM[0]

Bit 0: Filter mode.

FBM[1]

Bit 1: Filter mode.

FBM[2]

Bit 2: Filter mode.

FBM[3]

Bit 3: Filter mode.

FBM[4]

Bit 4: Filter mode.

FBM[5]

Bit 5: Filter mode.

FBM[6]

Bit 6: Filter mode.

FBM[7]

Bit 7: Filter mode.

FBM[8]

Bit 8: Filter mode.

FBM[9]

Bit 9: Filter mode.

FBM[10]

Bit 10: Filter mode.

FBM[11]

Bit 11: Filter mode.

FBM[12]

Bit 12: Filter mode.

FBM[13]

Bit 13: Filter mode.

FBM[14]

Bit 14: Filter mode.

FBM[15]

Bit 15: Filter mode.

FBM[16]

Bit 16: Filter mode.

FBM[17]

Bit 17: Filter mode.

FBM[18]

Bit 18: Filter mode.

FBM[19]

Bit 19: Filter mode.

FBM[20]

Bit 20: Filter mode.

FBM[21]

Bit 21: Filter mode.

FBM[22]

Bit 22: Filter mode.

FBM[23]

Bit 23: Filter mode.

FBM[24]

Bit 24: Filter mode.

FBM[25]

Bit 25: Filter mode.

FBM[26]

Bit 26: Filter mode.

FBM[27]

Bit 27: Filter mode.

FS1R

CAN_FS1R

Offset: 0x20c, size: 32, reset: 0x00000000, access: read-write

0/28 fields covered.

Toggle fields FSC[0]

Bit 0: Filter scale configuration.

FSC[1]

Bit 1: Filter scale configuration.

FSC[2]

Bit 2: Filter scale configuration.

FSC[3]

Bit 3: Filter scale configuration.

FSC[4]

Bit 4: Filter scale configuration.

FSC[5]

Bit 5: Filter scale configuration.

FSC[6]

Bit 6: Filter scale configuration.

FSC[7]

Bit 7: Filter scale configuration.

FSC[8]

Bit 8: Filter scale configuration.

FSC[9]

Bit 9: Filter scale configuration.

FSC[10]

Bit 10: Filter scale configuration.

FSC[11]

Bit 11: Filter scale configuration.

FSC[12]

Bit 12: Filter scale configuration.

FSC[13]

Bit 13: Filter scale configuration.

FSC[14]

Bit 14: Filter scale configuration.

FSC[15]

Bit 15: Filter scale configuration.

FSC[16]

Bit 16: Filter scale configuration.

FSC[17]

Bit 17: Filter scale configuration.

FSC[18]

Bit 18: Filter scale configuration.

FSC[19]

Bit 19: Filter scale configuration.

FSC[20]

Bit 20: Filter scale configuration.

FSC[21]

Bit 21: Filter scale configuration.

FSC[22]

Bit 22: Filter scale configuration.

FSC[23]

Bit 23: Filter scale configuration.

FSC[24]

Bit 24: Filter scale configuration.

FSC[25]

Bit 25: Filter scale configuration.

FSC[26]

Bit 26: Filter scale configuration.

FSC[27]

Bit 27: Filter scale configuration.

FFA1R

CAN_FFA1R

Offset: 0x214, size: 32, reset: 0x00000000, access: read-write

0/28 fields covered.

Toggle fields FFA[0]

Bit 0: Filter FIFO assignment for filter 0.

FFA[1]

Bit 1: Filter FIFO assignment for filter 1.

FFA[2]

Bit 2: Filter FIFO assignment for filter 2.

FFA[3]

Bit 3: Filter FIFO assignment for filter 3.

FFA[4]

Bit 4: Filter FIFO assignment for filter 4.

FFA[5]

Bit 5: Filter FIFO assignment for filter 5.

FFA[6]

Bit 6: Filter FIFO assignment for filter 6.

FFA[7]

Bit 7: Filter FIFO assignment for filter 7.

FFA[8]

Bit 8: Filter FIFO assignment for filter 8.

FFA[9]

Bit 9: Filter FIFO assignment for filter 9.

FFA[10]

Bit 10: Filter FIFO assignment for filter 10.

FFA[11]

Bit 11: Filter FIFO assignment for filter 11.

FFA[12]

Bit 12: Filter FIFO assignment for filter 12.

FFA[13]

Bit 13: Filter FIFO assignment for filter 13.

FFA[14]

Bit 14: Filter FIFO assignment for filter 14.

FFA[15]

Bit 15: Filter FIFO assignment for filter 15.

FFA[16]

Bit 16: Filter FIFO assignment for filter 16.

FFA[17]

Bit 17: Filter FIFO assignment for filter 17.

FFA[18]

Bit 18: Filter FIFO assignment for filter 18.

FFA[19]

Bit 19: Filter FIFO assignment for filter 19.

FFA[20]

Bit 20: Filter FIFO assignment for filter 20.

FFA[21]

Bit 21: Filter FIFO assignment for filter 21.

FFA[22]

Bit 22: Filter FIFO assignment for filter 22.

FFA[23]

Bit 23: Filter FIFO assignment for filter 23.

FFA[24]

Bit 24: Filter FIFO assignment for filter 24.

FFA[25]

Bit 25: Filter FIFO assignment for filter 25.

FFA[26]

Bit 26: Filter FIFO assignment for filter 26.

FFA[27]

Bit 27: Filter FIFO assignment for filter 27.

FA1R

CAN_FA1R

Offset: 0x21c, size: 32, reset: 0x00000000, access: read-write

0/28 fields covered.

Toggle fields FACT[0]

Bit 0: Filter active.

FACT[1]

Bit 1: Filter active.

FACT[2]

Bit 2: Filter active.

FACT[3]

Bit 3: Filter active.

FACT[4]

Bit 4: Filter active.

FACT[5]

Bit 5: Filter active.

FACT[6]

Bit 6: Filter active.

FACT[7]

Bit 7: Filter active.

FACT[8]

Bit 8: Filter active.

FACT[9]

Bit 9: Filter active.

FACT[10]

Bit 10: Filter active.

FACT[11]

Bit 11: Filter active.

FACT[12]

Bit 12: Filter active.

FACT[13]

Bit 13: Filter active.

FACT[14]

Bit 14: Filter active.

FACT[15]

Bit 15: Filter active.

FACT[16]

Bit 16: Filter active.

FACT[17]

Bit 17: Filter active.

FACT[18]

Bit 18: Filter active.

FACT[19]

Bit 19: Filter active.

FACT[20]

Bit 20: Filter active.

FACT[21]

Bit 21: Filter active.

FACT[22]

Bit 22: Filter active.

FACT[23]

Bit 23: Filter active.

FACT[24]

Bit 24: Filter active.

FACT[25]

Bit 25: Filter active.

FACT[26]

Bit 26: Filter active.

FACT[27]

Bit 27: Filter active.

FR1 [0]

Filter bank x register 1

Offset: 0x240, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [0]

Filter bank x register 2

Offset: 0x244, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [1]

Filter bank x register 1

Offset: 0x248, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [1]

Filter bank x register 2

Offset: 0x24c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [2]

Filter bank x register 1

Offset: 0x250, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [2]

Filter bank x register 2

Offset: 0x254, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [3]

Filter bank x register 1

Offset: 0x258, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [3]

Filter bank x register 2

Offset: 0x25c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [4]

Filter bank x register 1

Offset: 0x260, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [4]

Filter bank x register 2

Offset: 0x264, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [5]

Filter bank x register 1

Offset: 0x268, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [5]

Filter bank x register 2

Offset: 0x26c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [6]

Filter bank x register 1

Offset: 0x270, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [6]

Filter bank x register 2

Offset: 0x274, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [7]

Filter bank x register 1

Offset: 0x278, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [7]

Filter bank x register 2

Offset: 0x27c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [8]

Filter bank x register 1

Offset: 0x280, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [8]

Filter bank x register 2

Offset: 0x284, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [9]

Filter bank x register 1

Offset: 0x288, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [9]

Filter bank x register 2

Offset: 0x28c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [10]

Filter bank x register 1

Offset: 0x290, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [10]

Filter bank x register 2

Offset: 0x294, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [11]

Filter bank x register 1

Offset: 0x298, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [11]

Filter bank x register 2

Offset: 0x29c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [12]

Filter bank x register 1

Offset: 0x2a0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [12]

Filter bank x register 2

Offset: 0x2a4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [13]

Filter bank x register 1

Offset: 0x2a8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [13]

Filter bank x register 2

Offset: 0x2ac, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [14]

Filter bank x register 1

Offset: 0x2b0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [14]

Filter bank x register 2

Offset: 0x2b4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [15]

Filter bank x register 1

Offset: 0x2b8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [15]

Filter bank x register 2

Offset: 0x2bc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [16]

Filter bank x register 1

Offset: 0x2c0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [16]

Filter bank x register 2

Offset: 0x2c4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [17]

Filter bank x register 1

Offset: 0x2c8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [17]

Filter bank x register 2

Offset: 0x2cc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [18]

Filter bank x register 1

Offset: 0x2d0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [18]

Filter bank x register 2

Offset: 0x2d4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [19]

Filter bank x register 1

Offset: 0x2d8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [19]

Filter bank x register 2

Offset: 0x2dc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [20]

Filter bank x register 1

Offset: 0x2e0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [20]

Filter bank x register 2

Offset: 0x2e4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [21]

Filter bank x register 1

Offset: 0x2e8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [21]

Filter bank x register 2

Offset: 0x2ec, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [22]

Filter bank x register 1

Offset: 0x2f0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [22]

Filter bank x register 2

Offset: 0x2f4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [23]

Filter bank x register 1

Offset: 0x2f8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [23]

Filter bank x register 2

Offset: 0x2fc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [24]

Filter bank x register 1

Offset: 0x300, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [24]

Filter bank x register 2

Offset: 0x304, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [25]

Filter bank x register 1

Offset: 0x308, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [25]

Filter bank x register 2

Offset: 0x30c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [26]

Filter bank x register 1

Offset: 0x310, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [26]

Filter bank x register 2

Offset: 0x314, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR1 [27]

Filter bank x register 1

Offset: 0x318, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

FR2 [27]

Filter bank x register 2

Offset: 0x31c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FB
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FB
rw Toggle fields FB

Bits 0-31: Filter bits.

CEC

0x40007800: HDMI-CEC controller

4/40 fields covered.

Toggle register map Toggle registers CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

Toggle fields CECEN

Bit 0: CEC Enable.

TXSOM

Bit 1: Tx start of message.

TXEOM

Bit 2: Tx End Of Message.

CFGR

configuration register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

2/9 fields covered.

Toggle fields SFT

Bits 0-2: Signal Free Time.

Allowed values: 0x0-0x7

RXTOL

Bit 3: Rx-Tolerance.

BRESTP

Bit 4: Rx-stop on bit rising error.

BREGEN

Bit 5: Generate error-bit on bit rising error.

LBPEGEN

Bit 6: Generate Error-Bit on Long Bit Period Error.

BRDNOGEN

Bit 7: Avoid Error-Bit Generation in Broadcast.

SFTOP

Bit 8: SFT Option Bit.

OAR

Bits 16-30: Own Address.

Allowed values: 0x0-0x7fff

LSTN

Bit 31: Listen mode.

TXDR

Tx data register

Offset: 0x8, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TXD
w Toggle fields TXD

Bits 0-7: Tx Data register.

Allowed values: 0x0-0xff

RXDR

Rx Data Register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RXDR
r Toggle fields RXDR

Bits 0-7: CEC Rx Data Register.

ISR

Interrupt and Status Register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/13 fields covered.

Toggle fields RXBR

Bit 0: Rx-Byte Received.

RXEND

Bit 1: End Of Reception.

RXOVR

Bit 2: Rx-Overrun.

BRE

Bit 3: Rx-Bit rising error.

SBPE

Bit 4: Rx-Short Bit period error.

LBPE

Bit 5: Rx-Long Bit Period Error.

RXACKE

Bit 6: Rx-Missing Acknowledge.

ARBLST

Bit 7: Arbitration Lost.

TXBR

Bit 8: Tx-Byte Request.

TXEND

Bit 9: End of Transmission.

TXUDR

Bit 10: Tx-Buffer Underrun.

TXERR

Bit 11: Tx-Error.

TXACKE

Bit 12: Tx-Missing acknowledge error.

IER

interrupt enable register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/13 fields covered.

Toggle fields RXBRIE

Bit 0: Rx-Byte Received Interrupt Enable.

RXENDIE

Bit 1: End Of Reception Interrupt Enable.

RXOVRIE

Bit 2: Rx-Buffer Overrun Interrupt Enable.

BREIE

Bit 3: Bit Rising Error Interrupt Enable.

SBPEIE

Bit 4: Short Bit Period Error Interrupt Enable.

LBPEIE

Bit 5: Long Bit Period Error Interrupt Enable.

RXACKIE

Bit 6: Rx-Missing Acknowledge Error Interrupt Enable.

ARBLSTIE

Bit 7: Arbitration Lost Interrupt Enable.

TXBRIE

Bit 8: Tx-Byte Request Interrupt Enable.

TXENDIE

Bit 9: Tx-End of message interrupt enable.

TXUDRIE

Bit 10: Tx-Underrun interrupt enable.

TXERRIE

Bit 11: Tx-Error Interrupt Enable.

TXACKIE

Bit 12: Tx-Missing Acknowledge Error Interrupt Enable.

COMP

0x40010000: General purpose comparators

18/18 fields covered.

Toggle register map Toggle registers CSR

control and status register

Offset: 0x1c, size: 32, reset: 0x00000000, access: Unspecified

18/18 fields covered.

Toggle fields COMP1EN

Bit 0: Comparator 1 enable.

Allowed values:
0: Disabled: Comparator X disabled
1: Enabled: Comparator X enabled

COMP1SW1

Bit 1: Comparator 1 non inverting input DAC switch.

Allowed values:
0: Open: Switch open
1: Closed: Switch closed

COMP1MODE

Bits 2-3: Comparator 1 mode.

Allowed values:
0: HighSpeed: High speed / full power
1: MediumSpeed: Medium speed / medium power
2: LowSpeed: Low speed / low power
3: VeryLowSpeed: Very-low speed / ultra-low power

COMP1INSEL

Bits 4-6: Comparator 1 inverting input selection.

Allowed values:
0: OneQuarterVRef: 1/4 of VRefint
1: OneHalfVRef: 1/2 of VRefint
2: ThreeQuarterVRef: 3/4 of VRefint
3: VRef: VRefint
4: Comp1_INM4: COMP1_INM4 (PA4 with DAC_OUT1 if enabled)
5: Comp1_INM5: COMP1_INM5 (PA5 with DAC_OUT2 if present and enabled)
6: Comp1_INM6: COMP1_INM6 (PA0)

COMP1OUTSEL

Bits 8-10: Comparator 1 output selection.

Allowed values:
0: NoSelection: No selection
1: Timer1BreakInput: Timer 1 break input
2: Timer1InputCapture1: Timer 1 Input capture 1
3: Timer1OCRefClearInput: Timer 1 OCrefclear input
4: Timer2InputCapture4: Timer 2 input capture 4
5: Timer2OCRefClearInput: Timer 2 OCrefclear input
6: Timer3InputCapture1: Timer 3 input capture 1
7: Timer3OCRefClearInput: Timer 3 OCrefclear input

COMP1POL

Bit 11: Comparator 1 output polarity.

Allowed values:
0: NotInverted: Output is not inverted
1: Inverted: Output is inverted

COMP1HYST

Bits 12-13: Comparator 1 hysteresis.

Allowed values:
0: NoHysteresis: No hysteresis
1: LowHysteresis: Low hysteresis
2: MediumHysteresis: Medium hysteresis
3: HighHysteresis: High hysteresis

COMP1OUT

Bit 14: Comparator 1 output.

Allowed values:
0: Low: Non-inverting input below inverting input
1: High: Non-inverting input above inverting input

COMP1LOCK

Bit 15: Comparator 1 lock.

Allowed values:
0: Unlocked: Comparator X CSR bits are read-write
1: Locked: Comparator X CSR bits are read-only

COMP2EN

Bit 16: Comparator 2 enable.

Allowed values:
0: Disabled: Comparator X disabled
1: Enabled: Comparator X enabled

COMP2MODE

Bits 18-19: Comparator 2 mode.

Allowed values:
0: HighSpeed: High speed / full power
1: MediumSpeed: Medium speed / medium power
2: LowSpeed: Low speed / low power
3: VeryLowSpeed: Very-low speed / ultra-low power

COMP2INSEL

Bits 20-22: Comparator 2 inverting input selection.

Allowed values:
0: OneQuarterVRef: 1/4 of VRefint
1: OneHalfVRef: 1/2 of VRefint
2: ThreeQuarterVRef: 3/4 of VRefint
3: VRef: VRefint
4: Comp2_INM4: COMP1_INM4 (PA4 with DAC_OUT1 if enabled)
5: Comp2_INM5: COMP1_INM5 (PA5 with DAC_OUT2 if present and enabled)
6: Comp2_INM6: COMP1_INM6 (PA2)

WNDWEN

Bit 23: Window mode enable.

Allowed values:
0: Disabled: Window mode disabled
1: Enabled: Window mode enabled

COMP2OUTSEL

Bits 24-26: Comparator 2 output selection.

COMP2POL

Bit 27: Comparator 2 output polarity.

Allowed values:
0: NotInverted: Output is not inverted
1: Inverted: Output is inverted

COMP2HYST

Bits 28-29: Comparator 2 hysteresis.

Allowed values:
0: NoHysteresis: No hysteresis
1: LowHysteresis: Low hysteresis
2: MediumHysteresis: Medium hysteresis
3: HighHysteresis: High hysteresis

COMP2OUT

Bit 30: Comparator 2 output.

Allowed values:
0: Low: Non-inverting input below inverting input
1: High: Non-inverting input above inverting input

COMP2LOCK

Bit 31: Comparator 2 lock.

Allowed values:
0: Unlocked: Comparator X CSR bits are read-write
1: Locked: Comparator X CSR bits are read-only

CRC

0x40023000: cyclic redundancy check calculation unit

10/10 fields covered.

Toggle register map Toggle registers DR

Data register

Offset: 0x0, size: 32, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 DR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR
rw Toggle fields DR

Bits 0-31: Data register bits.

Allowed values: 0x0-0xffffffff

DR16

Data register - half-word sized

Offset: 0x0, size: 16, reset: 0x0000FFFF, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR16
rw Toggle fields DR16

Bits 0-15: Data register bits.

Allowed values: 0x0-0xffff

DR8

Data register - byte sized

Offset: 0x0, size: 8, reset: 0x000000FF, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR8
rw Toggle fields DR8

Bits 0-7: Data register bits.

Allowed values: 0x0-0xff

IDR

Independent data register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 IDR
rw Toggle fields IDR

Bits 0-7: General-purpose 8-bit data register bits.

Allowed values: 0x0-0xff

Control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields RESET

Bit 0: reset bit.

Allowed values:
1: Reset: Resets the CRC calculation unit and sets the data register to 0xFFFF FFFF

POLYSIZE

Bits 3-4: Polynomial size.

Allowed values:
0: Polysize32: 32-bit polynomial
1: Polysize16: 16-bit polynomial
2: Polysize8: 8-bit polynomial
3: Polysize7: 7-bit polynomial

REV_IN

Bits 5-6: Reverse input data.

Allowed values:
0: Normal: Bit order not affected
1: Byte: Bit reversal done by byte
2: HalfWord: Bit reversal done by half-word
3: Word: Bit reversal done by word

REV_OUT

Bit 7: Reverse output data.

Allowed values:
0: Normal: Bit order not affected
1: Reversed: Bit reversed output

INIT

Initial CRC value

Offset: 0x10, size: 32, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 INIT
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 INIT
rw Toggle fields INIT

Bits 0-31: Programmable initial CRC value.

Allowed values: 0x0-0xffffffff

POL

CRC polynomial

Offset: 0x14, size: 32, reset: 0x04C11DB7, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 POL
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 POL
rw Toggle fields POL

Bits 0-31: Programmable polynomial.

Allowed values: 0x0-0xffffffff

CRS

0x40006c00: Clock recovery system

26/26 fields covered.

Toggle register map Toggle registers CR

control register

Offset: 0x0, size: 32, reset: 0x00002000, access: read-write

8/8 fields covered.

Toggle fields SYNCOKIE

Bit 0: SYNC event OK interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

SYNCWARNIE

Bit 1: SYNC warning interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

ERRIE

Bit 2: Synchronization or trimming error interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

ESYNCIE

Bit 3: Expected SYNC interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

CEN

Bit 5: Frequency error counter enable.

Allowed values:
0: Disabled: Frequency error counter disabled
1: Enabled: Frequency error counter enabled

AUTOTRIMEN

Bit 6: Automatic trimming enable.

Allowed values:
0: Disabled: Automatic trimming disabled
1: Enabled: Automatic trimming enabled

SWSYNC

Bit 7: Generate software SYNC event.

Allowed values:
1: Sync: A software sync is generated

TRIM

Bits 8-13: HSI48 oscillator smooth trimming.

Allowed values: 0x0-0x3f

CFGR

configuration register

Offset: 0x4, size: 32, reset: 0x2022BB7F, access: read-write

5/5 fields covered.

Toggle fields RELOAD

Bits 0-15: Counter reload value.

Allowed values: 0x0-0xffff

FELIM

Bits 16-23: Frequency error limit.

Allowed values: 0x0-0xff

SYNCDIV

Bits 24-26: SYNC divider.

Allowed values:
0: Div1: SYNC not divided
1: Div2: SYNC divided by 2
2: Div4: SYNC divided by 4
3: Div8: SYNC divided by 8
4: Div16: SYNC divided by 16
5: Div32: SYNC divided by 32
6: Div64: SYNC divided by 64
7: Div128: SYNC divided by 128

SYNCSRC

Bits 28-29: SYNC signal source selection.

Allowed values:
0: GPIO_AF: GPIO AF (crs_sync_in_1) selected as SYNC signal source
1: LSE: LSE (crs_sync_in_2) selected as SYNC signal source
2: USB_SOF: USB SOF (crs_sync_in_3) selected as SYNC signal source

SYNCPOL

Bit 31: SYNC polarity selection.

Allowed values:
0: RisingEdge: SYNC active on rising edge
1: FallingEdge: SYNC active on falling edge

ISR

interrupt and status register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-only

9/9 fields covered.

Toggle fields SYNCOKF

Bit 0: SYNC event OK flag.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

SYNCWARNF

Bit 1: SYNC warning flag.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

ERRF

Bit 2: Error flag.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

ESYNCF

Bit 3: Expected SYNC flag.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

SYNCERR

Bit 8: SYNC error.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

SYNCMISS

Bit 9: SYNC missed.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

TRIMOVF

Bit 10: Trimming overflow or underflow.

Allowed values:
0: NotSignaled: Signal not set
1: Signaled: Signal set

FEDIR

Bit 15: Frequency error direction.

Allowed values:
0: UpCounting: Error in up-counting direction
1: DownCounting: Error in down-counting direction

FECAP

Bits 16-31: Frequency error capture.

Allowed values: 0x0-0xffff

ICR

interrupt flag clear register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields SYNCOKC

Bit 0: SYNC event OK clear flag.

Allowed values:
1: Clear: Clear flag

SYNCWARNC

Bit 1: SYNC warning clear flag.

Allowed values:
1: Clear: Clear flag

ERRC

Bit 2: Error clear flag.

Allowed values:
1: Clear: Clear flag

ESYNCC

Bit 3: Expected SYNC clear flag.

Allowed values:
1: Clear: Clear flag

DAC

0x40007400: Digital-to-analog converter

34/34 fields covered.

Toggle register map Toggle registers CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields EN[1]

Bit 0: DAC channel1 enable.

Allowed values:
0: Disabled: DAC channel X disabled
1: Enabled: DAC channel X enabled

BOFF[1]

Bit 1: DAC channel1 output buffer disable.

Allowed values:
0: Enabled: DAC channel X output buffer enabled
1: Disabled: DAC channel X output buffer disabled

TEN[1]

Bit 2: DAC channel1 trigger enable.

Allowed values:
0: Disabled: DAC channel X trigger disabled
1: Enabled: DAC channel X trigger enabled

TSEL1

Bits 3-5: DAC channel1 trigger selection.

Allowed values:
0: Tim6Trgo: Timer 6 TRGO event
1: Tim3Trgo: Timer 3 TRGO event
2: Tim7Trgo: Timer 7 TRGO event
3: Tim15Trgo: Timer 15 TRGO event
4: Tim2Trgo: Timer 2 TRGO event
6: Exti9: EXTI line 9
7: Swtrig: Software trigger

WAVE[1]

Bits 6-7: DAC channel1 noise/triangle wave generation enable.

Allowed values:
0: Disabled: Wave generation disabled
1: Noise: Noise wave generation enabled
2 (+): Triangle: Triangle wave generation enabled

MAMP[1]

Bits 8-11: DAC channel1 mask/amplitude selector.

Allowed values:
0: Amp1: Unmask bit0 of LFSR/ triangle amplitude equal to 1
1: Amp3: Unmask bits[1:0] of LFSR/ triangle amplitude equal to 3
2: Amp7: Unmask bits[2:0] of LFSR/ triangle amplitude equal to 7
3: Amp15: Unmask bits[3:0] of LFSR/ triangle amplitude equal to 15
4: Amp31: Unmask bits[4:0] of LFSR/ triangle amplitude equal to 31
5: Amp63: Unmask bits[5:0] of LFSR/ triangle amplitude equal 63
6: Amp127: Unmask bits[6:0] of LFSR/ triangle amplitude equal to 127
7: Amp255: Unmask bits[7:0] of LFSR/ triangle amplitude equal to 255
8: Amp511: Unmask bits[8:0] of LFSR/ triangle amplitude equal to 511
9: Amp1023: Unmask bits[9:0] of LFSR/ triangle amplitude equal to 1023
10: Amp2047: Unmask bits[10:0] of LFSR/ triangle amplitude equal to 2047
11 (+): Amp4095: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

DMAEN[1]

Bit 12: DAC channel1 DMA enable.

Allowed values:
0: Disabled: DAC channel X DMA mode disabled
1: Enabled: DAC channel X DMA mode enabled

DMAUDRIE[1]

Bit 13: DAC channel1 DMA Underrun Interrupt enable.

Allowed values:
0: Disabled: DAC channel X DMA Underrun Interrupt disabled
1: Enabled: DAC channel X DMA Underrun Interrupt enabled

EN[2]

Bit 16: DAC channel2 enable.

Allowed values:
0: Disabled: DAC channel X disabled
1: Enabled: DAC channel X enabled

BOFF[2]

Bit 17: DAC channel2 output buffer disable.

Allowed values:
0: Enabled: DAC channel X output buffer enabled
1: Disabled: DAC channel X output buffer disabled

TEN[2]

Bit 18: DAC channel2 trigger enable.

Allowed values:
0: Disabled: DAC channel X trigger disabled
1: Enabled: DAC channel X trigger enabled

TSEL2

Bits 19-21: DAC channel2 trigger selection.

WAVE[2]

Bits 22-23: DAC channel2 noise/triangle wave generation enable.

Allowed values:
0: Disabled: Wave generation disabled
1: Noise: Noise wave generation enabled
2 (+): Triangle: Triangle wave generation enabled

MAMP[2]

Bits 24-27: DAC channel2 mask/amplitude selector.

DMAEN[2]

Bit 28: DAC channel2 DMA enable.

Allowed values:
0: Disabled: DAC channel X DMA mode disabled
1: Enabled: DAC channel X DMA mode enabled

DMAUDRIE[2]

Bit 29: DAC channel2 DMA Underrun Interrupt enable.

Allowed values:
0: Disabled: DAC channel X DMA Underrun Interrupt disabled
1: Enabled: DAC channel X DMA Underrun Interrupt enabled

SWTRIGR

software trigger register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

2/2 fields covered.

Toggle fields SWTRIG[1]

Bit 0: DAC channel1 software trigger.

Allowed values:
0: Disabled: DAC channel X software trigger disabled
1: Enabled: DAC channel X software trigger enabled

SWTRIG[2]

Bit 1: DAC channel2 software trigger.

Allowed values:
0: Disabled: DAC channel X software trigger disabled
1: Enabled: DAC channel X software trigger enabled

DHR12R[1]

channel1 12-bit right-aligned data holding register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDHR
rw Toggle fields DACCDHR

Bits 0-11: DAC channel1 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DHR12L[1]

channel1 12-bit left aligned data holding register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDHR
rw Toggle fields DACCDHR

Bits 4-15: DAC channel1 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DHR8R[1]

channel1 8-bit right aligned data holding register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDHR
rw Toggle fields DACCDHR

Bits 0-7: DAC channel1 8-bit right-aligned data.

Allowed values: 0x0-0xff

DHR12R[2]

channel2 12-bit right-aligned data holding register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDHR
rw Toggle fields DACCDHR

Bits 0-11: DAC channel1 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DHR12L[2]

channel2 12-bit left aligned data holding register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDHR
rw Toggle fields DACCDHR

Bits 4-15: DAC channel1 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DHR8R[2]

channel2 8-bit right aligned data holding register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDHR
rw Toggle fields DACCDHR

Bits 0-7: DAC channel1 8-bit right-aligned data.

Allowed values: 0x0-0xff

DHR12RD

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 DACC[2]DHR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACC[1]DHR
rw Toggle fields DACC[1]DHR

Bits 0-11: DAC channel1 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DACC[2]DHR

Bits 16-27: DAC channel2 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DHR12LD

Dual DAC 12-bit left-aligned data holding register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 DACC[2]DHR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACC[1]DHR
rw Toggle fields DACC[1]DHR

Bits 4-15: DAC channel1 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DACC[2]DHR

Bits 20-31: DAC channel2 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DHR8RD

Dual DAC 8-bit right-aligned data holding register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

Toggle fields DACC[1]DHR

Bits 0-7: DAC channel1 8-bit right-aligned data.

Allowed values: 0x0-0xff

DACC[2]DHR

Bits 8-15: DAC channel2 8-bit right-aligned data.

Allowed values: 0x0-0xff

DOR[1]

channel1 data output register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDOR
r Toggle fields DACCDOR

Bits 0-11: DAC channel1 data output.

DOR[2]

channel2 data output register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DACCDOR
r Toggle fields DACCDOR

Bits 0-11: DAC channel1 data output.

status register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 DMAUDR[2]
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAUDR[1]
rw Toggle fields DMAUDR[1]

Bit 13: DAC channel1 DMA underrun flag.

Allowed values:
0: NoUnderrun: No DMA underrun error condition occurred for DAC channel x
1: Underrun: DMA underrun error condition occurred for DAC channel x (the currently selected trigger is driving DAC channel1 conversion at a frequency higher than the DMA service capability rate)

DMAUDR[2]

Bit 29: DAC channel2 DMA underrun flag.

DBGMCU

0x40015800: Debug support

3/19 fields covered.

Toggle register map Toggle registers IDCODE

MCU Device ID Code Register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 REV_ID
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DIV_ID
r DEV_ID
r Toggle fields DEV_ID

Bits 0-11: Device Identifier.

DIV_ID

Bits 12-15: Division Identifier.

REV_ID

Bits 16-31: Revision Identifier.

Debug MCU Configuration Register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

Toggle fields DBG_STOP

Bit 1: Debug Stop Mode.

DBG_STANDBY

Bit 2: Debug Standby Mode.

APB1_FZ

Debug MCU APB1 freeze register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

Toggle fields DBG_TIM2_STOP

Bit 0: TIM2 counter stopped when core is halted.

DBG_TIM3_STOP

Bit 1: TIM3 counter stopped when core is halted.

TIM3_counter_stopped_when_core_is_halted

Bit 4: TIM6 counter stopped when core is halted.

DBG_TIM7_STOP

Bit 5: TIM7 counter stopped when core is halted.

DBG_TIM14_STOP

Bit 8: TIM14 counter stopped when core is halted.

DBG_RTC_STOP

Bit 10: Debug RTC stopped when core is halted.

DBG_WWDG_STOP

Bit 11: Debug window watchdog stopped when core is halted.

DBG_IWDG_STOP

Bit 12: Debug independent watchdog stopped when core is halted.

DBG_I2C1_SMBUS_TIMEOUT

Bit 21: SMBUS timeout mode stopped when core is halted.

DBG_CAN_STOP

Bit 25: CAN stopped when core is halted.

APB2_FZ

Debug MCU APB2 freeze register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields DBG_TIM1_STOP

Bit 11: TIM1 counter stopped when core is halted.

DBG_TIM15_STOP

Bit 16: TIM15 counter stopped when core is halted.

DBG_TIM16_STOP

Bit 17: TIM16 counter stopped when core is halted.

DBG_TIM17_STOP

Bit 18: TIM17 counter stopped when core is halted.

DMA1

0x40020000: DMA controller

147/161 fields covered.

Toggle register map Toggle registers ISR

DMA interrupt status register (DMA_ISR)

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

28/28 fields covered.

Toggle fields GIF[1]

Bit 0: Channel 1 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[1]

Bit 1: Channel 1 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[1]

Bit 2: Channel 1 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[1]

Bit 3: Channel 1 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[2]

Bit 4: Channel 2 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[2]

Bit 5: Channel 2 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[2]

Bit 6: Channel 2 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[2]

Bit 7: Channel 2 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[3]

Bit 8: Channel 3 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[3]

Bit 9: Channel 3 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[3]

Bit 10: Channel 3 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[3]

Bit 11: Channel 3 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[4]

Bit 12: Channel 4 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[4]

Bit 13: Channel 4 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[4]

Bit 14: Channel 4 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[4]

Bit 15: Channel 4 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[5]

Bit 16: Channel 5 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[5]

Bit 17: Channel 5 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[5]

Bit 18: Channel 5 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[5]

Bit 19: Channel 5 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[6]

Bit 20: Channel 6 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[6]

Bit 21: Channel 6 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[6]

Bit 22: Channel 6 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[6]

Bit 23: Channel 6 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[7]

Bit 24: Channel 7 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[7]

Bit 25: Channel 7 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[7]

Bit 26: Channel 7 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[7]

Bit 27: Channel 7 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

IFCR

DMA interrupt flag clear register (DMA_IFCR)

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

28/28 fields covered.

Toggle fields CGIF[1]

Bit 0: Channel 1 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[1]

Bit 1: Channel 1 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[1]

Bit 2: Channel 1 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[1]

Bit 3: Channel 1 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[2]

Bit 4: Channel 2 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[2]

Bit 5: Channel 2 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[2]

Bit 6: Channel 2 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[2]

Bit 7: Channel 2 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[3]

Bit 8: Channel 3 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[3]

Bit 9: Channel 3 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[3]

Bit 10: Channel 3 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[3]

Bit 11: Channel 3 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[4]

Bit 12: Channel 4 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[4]

Bit 13: Channel 4 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[4]

Bit 14: Channel 4 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[4]

Bit 15: Channel 4 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[5]

Bit 16: Channel 5 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[5]

Bit 17: Channel 5 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[5]

Bit 18: Channel 5 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[5]

Bit 19: Channel 5 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[6]

Bit 20: Channel 6 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[6]

Bit 21: Channel 6 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[6]

Bit 22: Channel 6 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[6]

Bit 23: Channel 6 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[7]

Bit 24: Channel 7 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[7]

Bit 25: Channel 7 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[7]

Bit 26: Channel 7 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[7]

Bit 27: Channel 7 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CR [1]

DMA channel configuration register (DMA_CCR)

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [1]

DMA channel 1 number of data register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [1]

DMA channel 1 peripheral address register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [1]

DMA channel 1 memory address register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [2]

DMA channel configuration register (DMA_CCR)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [2]

DMA channel 1 number of data register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [2]

DMA channel 1 peripheral address register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [2]

DMA channel 1 memory address register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [3]

DMA channel configuration register (DMA_CCR)

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [3]

DMA channel 1 number of data register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [3]

DMA channel 1 peripheral address register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [3]

DMA channel 1 memory address register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [4]

DMA channel configuration register (DMA_CCR)

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [4]

DMA channel 1 number of data register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [4]

DMA channel 1 peripheral address register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [4]

DMA channel 1 memory address register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [5]

DMA channel configuration register (DMA_CCR)

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [5]

DMA channel 1 number of data register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [5]

DMA channel 1 peripheral address register

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [5]

DMA channel 1 memory address register

Offset: 0x64, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [6]

DMA channel configuration register (DMA_CCR)

Offset: 0x6c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [6]

DMA channel 1 number of data register

Offset: 0x70, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [6]

DMA channel 1 peripheral address register

Offset: 0x74, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [6]

DMA channel 1 memory address register

Offset: 0x78, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [7]

DMA channel configuration register (DMA_CCR)

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [7]

DMA channel 1 number of data register

Offset: 0x84, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [7]

DMA channel 1 peripheral address register

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [7]

DMA channel 1 memory address register

Offset: 0x8c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

DMA2

0x40020400: DMA controller

147/161 fields covered.

Toggle register map Toggle registers ISR

DMA interrupt status register (DMA_ISR)

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

28/28 fields covered.

Toggle fields GIF[1]

Bit 0: Channel 1 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[1]

Bit 1: Channel 1 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[1]

Bit 2: Channel 1 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[1]

Bit 3: Channel 1 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[2]

Bit 4: Channel 2 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[2]

Bit 5: Channel 2 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[2]

Bit 6: Channel 2 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[2]

Bit 7: Channel 2 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[3]

Bit 8: Channel 3 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[3]

Bit 9: Channel 3 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[3]

Bit 10: Channel 3 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[3]

Bit 11: Channel 3 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[4]

Bit 12: Channel 4 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[4]

Bit 13: Channel 4 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[4]

Bit 14: Channel 4 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[4]

Bit 15: Channel 4 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[5]

Bit 16: Channel 5 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[5]

Bit 17: Channel 5 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[5]

Bit 18: Channel 5 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[5]

Bit 19: Channel 5 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[6]

Bit 20: Channel 6 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[6]

Bit 21: Channel 6 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[6]

Bit 22: Channel 6 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[6]

Bit 23: Channel 6 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[7]

Bit 24: Channel 7 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[7]

Bit 25: Channel 7 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[7]

Bit 26: Channel 7 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[7]

Bit 27: Channel 7 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

IFCR

DMA interrupt flag clear register (DMA_IFCR)

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

28/28 fields covered.

Toggle fields CGIF[1]

Bit 0: Channel 1 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[1]

Bit 1: Channel 1 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[1]

Bit 2: Channel 1 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[1]

Bit 3: Channel 1 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[2]

Bit 4: Channel 2 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[2]

Bit 5: Channel 2 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[2]

Bit 6: Channel 2 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[2]

Bit 7: Channel 2 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[3]

Bit 8: Channel 3 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[3]

Bit 9: Channel 3 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[3]

Bit 10: Channel 3 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[3]

Bit 11: Channel 3 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[4]

Bit 12: Channel 4 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[4]

Bit 13: Channel 4 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[4]

Bit 14: Channel 4 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[4]

Bit 15: Channel 4 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[5]

Bit 16: Channel 5 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[5]

Bit 17: Channel 5 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[5]

Bit 18: Channel 5 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[5]

Bit 19: Channel 5 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[6]

Bit 20: Channel 6 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[6]

Bit 21: Channel 6 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[6]

Bit 22: Channel 6 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[6]

Bit 23: Channel 6 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[7]

Bit 24: Channel 7 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[7]

Bit 25: Channel 7 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[7]

Bit 26: Channel 7 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[7]

Bit 27: Channel 7 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CR [1]

DMA channel configuration register (DMA_CCR)

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [1]

DMA channel 1 number of data register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [1]

DMA channel 1 peripheral address register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [1]

DMA channel 1 memory address register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [2]

DMA channel configuration register (DMA_CCR)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [2]

DMA channel 1 number of data register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [2]

DMA channel 1 peripheral address register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [2]

DMA channel 1 memory address register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [3]

DMA channel configuration register (DMA_CCR)

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [3]

DMA channel 1 number of data register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [3]

DMA channel 1 peripheral address register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [3]

DMA channel 1 memory address register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [4]

DMA channel configuration register (DMA_CCR)

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [4]

DMA channel 1 number of data register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [4]

DMA channel 1 peripheral address register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [4]

DMA channel 1 memory address register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [5]

DMA channel configuration register (DMA_CCR)

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [5]

DMA channel 1 number of data register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [5]

DMA channel 1 peripheral address register

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [5]

DMA channel 1 memory address register

Offset: 0x64, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [6]

DMA channel configuration register (DMA_CCR)

Offset: 0x6c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [6]

DMA channel 1 number of data register

Offset: 0x70, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [6]

DMA channel 1 peripheral address register

Offset: 0x74, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [6]

DMA channel 1 memory address register

Offset: 0x78, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

CR [7]

DMA channel configuration register (DMA_CCR)

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half Transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

Bits 12-13: Channel Priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [7]

DMA channel 1 number of data register

Offset: 0x84, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NDT
rw Toggle fields NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [7]

DMA channel 1 peripheral address register

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PA
rw Toggle fields PA

Bits 0-31: Peripheral address.

MAR [7]

DMA channel 1 memory address register

Offset: 0x8c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MA
rw Toggle fields MA

Bits 0-31: Memory address.

EXTI

0x40010400: External interrupt/event controller

132/132 fields covered.

Toggle register map Toggle registers IMR

Interrupt mask register (EXTI_IMR)

Offset: 0x0, size: 32, reset: 0x0F940000, access: read-write

28/28 fields covered.

Toggle fields MR0

Bit 0: Interrupt Mask on line 0.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR1

Bit 1: Interrupt Mask on line 1.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR2

Bit 2: Interrupt Mask on line 2.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR3

Bit 3: Interrupt Mask on line 3.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR4

Bit 4: Interrupt Mask on line 4.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR5

Bit 5: Interrupt Mask on line 5.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR6

Bit 6: Interrupt Mask on line 6.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR7

Bit 7: Interrupt Mask on line 7.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR8

Bit 8: Interrupt Mask on line 8.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR9

Bit 9: Interrupt Mask on line 9.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR10

Bit 10: Interrupt Mask on line 10.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR11

Bit 11: Interrupt Mask on line 11.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR12

Bit 12: Interrupt Mask on line 12.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR13

Bit 13: Interrupt Mask on line 13.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR14

Bit 14: Interrupt Mask on line 14.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR15

Bit 15: Interrupt Mask on line 15.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR16

Bit 16: Interrupt Mask on line 16.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR17

Bit 17: Interrupt Mask on line 17.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR18

Bit 18: Interrupt Mask on line 18.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR19

Bit 19: Interrupt Mask on line 19.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR20

Bit 20: Interrupt Mask on line 20.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR21

Bit 21: Interrupt Mask on line 21.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR22

Bit 22: Interrupt Mask on line 22.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR23

Bit 23: Interrupt Mask on line 23.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR24

Bit 24: Interrupt Mask on line 24.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR25

Bit 25: Interrupt Mask on line 25.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR26

Bit 26: Interrupt Mask on line 26.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR27

Bit 27: Interrupt Mask on line 27.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EMR

Event mask register (EXTI_EMR)

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

28/28 fields covered.

Toggle fields MR0

Bit 0: Event Mask on line 0.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR1

Bit 1: Event Mask on line 1.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR2

Bit 2: Event Mask on line 2.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR3

Bit 3: Event Mask on line 3.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR4

Bit 4: Event Mask on line 4.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR5

Bit 5: Event Mask on line 5.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR6

Bit 6: Event Mask on line 6.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR7

Bit 7: Event Mask on line 7.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR8

Bit 8: Event Mask on line 8.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR9

Bit 9: Event Mask on line 9.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR10

Bit 10: Event Mask on line 10.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR11

Bit 11: Event Mask on line 11.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR12

Bit 12: Event Mask on line 12.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR13

Bit 13: Event Mask on line 13.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR14

Bit 14: Event Mask on line 14.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR15

Bit 15: Event Mask on line 15.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR16

Bit 16: Event Mask on line 16.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR17

Bit 17: Event Mask on line 17.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR18

Bit 18: Event Mask on line 18.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR19

Bit 19: Event Mask on line 19.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR20

Bit 20: Event Mask on line 20.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR21

Bit 21: Event Mask on line 21.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR22

Bit 22: Event Mask on line 22.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR23

Bit 23: Event Mask on line 23.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR24

Bit 24: Event Mask on line 24.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR25

Bit 25: Event Mask on line 25.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR26

Bit 26: Event Mask on line 26.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

MR27

Bit 27: Event Mask on line 27.

Allowed values:
0: Masked: Event request line is masked
1: Unmasked: Event request line is unmasked

RTSR

Rising Trigger selection register (EXTI_RTSR)

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields TR0

Bit 0: Rising trigger event configuration of line 0.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR1

Bit 1: Rising trigger event configuration of line 1.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR2

Bit 2: Rising trigger event configuration of line 2.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR3

Bit 3: Rising trigger event configuration of line 3.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR4

Bit 4: Rising trigger event configuration of line 4.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR5

Bit 5: Rising trigger event configuration of line 5.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR6

Bit 6: Rising trigger event configuration of line 6.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR7

Bit 7: Rising trigger event configuration of line 7.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR8

Bit 8: Rising trigger event configuration of line 8.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR9

Bit 9: Rising trigger event configuration of line 9.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR10

Bit 10: Rising trigger event configuration of line 10.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR11

Bit 11: Rising trigger event configuration of line 11.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR12

Bit 12: Rising trigger event configuration of line 12.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR13

Bit 13: Rising trigger event configuration of line 13.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR14

Bit 14: Rising trigger event configuration of line 14.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR15

Bit 15: Rising trigger event configuration of line 15.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR16

Bit 16: Rising trigger event configuration of line 16.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR17

Bit 17: Rising trigger event configuration of line 17.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR19

Bit 19: Rising trigger event configuration of line 19.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

FTSR

Falling Trigger selection register (EXTI_FTSR)

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields TR0

Bit 0: Falling trigger event configuration of line 0.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR1

Bit 1: Falling trigger event configuration of line 1.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR2

Bit 2: Falling trigger event configuration of line 2.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR3

Bit 3: Falling trigger event configuration of line 3.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR4

Bit 4: Falling trigger event configuration of line 4.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR5

Bit 5: Falling trigger event configuration of line 5.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR6

Bit 6: Falling trigger event configuration of line 6.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR7

Bit 7: Falling trigger event configuration of line 7.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR8

Bit 8: Falling trigger event configuration of line 8.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR9

Bit 9: Falling trigger event configuration of line 9.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR10

Bit 10: Falling trigger event configuration of line 10.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR11

Bit 11: Falling trigger event configuration of line 11.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR12

Bit 12: Falling trigger event configuration of line 12.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR13

Bit 13: Falling trigger event configuration of line 13.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR14

Bit 14: Falling trigger event configuration of line 14.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR15

Bit 15: Falling trigger event configuration of line 15.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR16

Bit 16: Falling trigger event configuration of line 16.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR17

Bit 17: Falling trigger event configuration of line 17.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR19

Bit 19: Falling trigger event configuration of line 19.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

SWIER

Software interrupt event register (EXTI_SWIER)

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields SWIER0

Bit 0: Software Interrupt on line 0.

Allowed values:
1: Pend: Generates an interrupt request

SWIER1

Bit 1: Software Interrupt on line 1.

Allowed values:
1: Pend: Generates an interrupt request

SWIER2

Bit 2: Software Interrupt on line 2.

Allowed values:
1: Pend: Generates an interrupt request

SWIER3

Bit 3: Software Interrupt on line 3.

Allowed values:
1: Pend: Generates an interrupt request

SWIER4

Bit 4: Software Interrupt on line 4.

Allowed values:
1: Pend: Generates an interrupt request

SWIER5

Bit 5: Software Interrupt on line 5.

Allowed values:
1: Pend: Generates an interrupt request

SWIER6

Bit 6: Software Interrupt on line 6.

Allowed values:
1: Pend: Generates an interrupt request

SWIER7

Bit 7: Software Interrupt on line 7.

Allowed values:
1: Pend: Generates an interrupt request

SWIER8

Bit 8: Software Interrupt on line 8.

Allowed values:
1: Pend: Generates an interrupt request

SWIER9

Bit 9: Software Interrupt on line 9.

Allowed values:
1: Pend: Generates an interrupt request

SWIER10

Bit 10: Software Interrupt on line 10.

Allowed values:
1: Pend: Generates an interrupt request

SWIER11

Bit 11: Software Interrupt on line 11.

Allowed values:
1: Pend: Generates an interrupt request

SWIER12

Bit 12: Software Interrupt on line 12.

Allowed values:
1: Pend: Generates an interrupt request

SWIER13

Bit 13: Software Interrupt on line 13.

Allowed values:
1: Pend: Generates an interrupt request

SWIER14

Bit 14: Software Interrupt on line 14.

Allowed values:
1: Pend: Generates an interrupt request

SWIER15

Bit 15: Software Interrupt on line 15.

Allowed values:
1: Pend: Generates an interrupt request

SWIER16

Bit 16: Software Interrupt on line 16.

Allowed values:
1: Pend: Generates an interrupt request

SWIER17

Bit 17: Software Interrupt on line 17.

Allowed values:
1: Pend: Generates an interrupt request

SWIER19

Bit 19: Software Interrupt on line 19.

Allowed values:
1: Pend: Generates an interrupt request

Pending register (EXTI_PR)

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields PR0

Bit 0: Pending bit 0.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR1

Bit 1: Pending bit 1.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR2

Bit 2: Pending bit 2.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR3

Bit 3: Pending bit 3.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR4

Bit 4: Pending bit 4.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR5

Bit 5: Pending bit 5.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR6

Bit 6: Pending bit 6.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR7

Bit 7: Pending bit 7.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR8

Bit 8: Pending bit 8.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR9

Bit 9: Pending bit 9.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR10

Bit 10: Pending bit 10.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR11

Bit 11: Pending bit 11.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR12

Bit 12: Pending bit 12.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR13

Bit 13: Pending bit 13.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR14

Bit 14: Pending bit 14.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR15

Bit 15: Pending bit 15.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR16

Bit 16: Pending bit 16.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR17

Bit 17: Pending bit 17.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR19

Bit 19: Pending bit 19.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

Flash

0x40022000: Flash

34/34 fields covered.

Toggle register map Toggle registers ACR

Flash access control register

Offset: 0x0, size: 32, reset: 0x00000030, access: Unspecified

3/3 fields covered.

Toggle fields LATENCY

Bits 0-2: LATENCY.

Allowed values:
0: WS0: 0 wait states
1: WS1: 1 wait state

PRFTBE

Bit 4: PRFTBE.

Allowed values:
0: Disabled: Prefetch is disabled
1: Enabled: Prefetch is enabled

PRFTBS

Bit 5: PRFTBS.

Allowed values:
0: Disabled: Prefetch buffer is disabled
1: Enabled: Prefetch buffer is enabled

KEYR

Flash key register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FKEYR
w 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FKEYR
w Toggle fields FKEYR

Bits 0-31: Flash Key.

Allowed values: 0x0-0xffffffff

OPTKEYR

Flash option key register

Offset: 0x8, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 OPTKEYR
w 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 OPTKEYR
w Toggle fields OPTKEYR

Bits 0-31: Option byte key.

Allowed values: 0x0-0xffffffff

Flash status register

Offset: 0xc, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

Toggle fields BSY

Bit 0: Busy.

Allowed values:
0: Inactive: No write/erase operation is in progress
1: Active: A write/erase operation is in progress

PGERR

Bit 2: Programming error.

Allowed values:
0: NoError: No programming error occurred
1: Error: A programming error occurred

WRPRT

Bit 4: Write protection error.

Allowed values:
0: NoError: No write protection error occurred
1: Error: A write protection error occurred

EOP

Bit 5: End of operation.

Allowed values:
0: NoEvent: No EOP operation occurred
1: Event: An EOP event occurred

Flash control register

Offset: 0x10, size: 32, reset: 0x00000080, access: read-write

11/11 fields covered.

Toggle fields PG

Bit 0: Programming.

Allowed values:
1: Program: Flash programming activated

PER

Bit 1: Page erase.

Allowed values:
1: PageErase: Erase activated for selected page

MER

Bit 2: Mass erase.

Allowed values:
1: MassErase: Erase activated for all user sectors

OPTPG

Bit 4: Option byte programming.

Allowed values:
1: OptionByteProgramming: Program option byte activated

OPTER

Bit 5: Option byte erase.

Allowed values:
1: OptionByteErase: Erase option byte activated

STRT

Bit 6: Start.

Allowed values:
1: Start: Trigger an erase operation

LOCK

Bit 7: Lock.

Allowed values:
0: Unlocked: FLASH_CR register is unlocked
1: Locked: FLASH_CR register is locked

OPTWRE

Bit 9: Option bytes write enable.

Allowed values:
0: Disabled: Option byte write disabled
1: Enabled: Option byte write enabled

ERRIE

Bit 10: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt generation disabled
1: Enabled: Error interrupt generation enabled

EOPIE

Bit 12: End of operation interrupt enable.

Allowed values:
0: Disabled: End of operation interrupt disabled
1: Enabled: End of operation interrupt enabled

FORCE_OPTLOAD

Bit 13: Force option byte loading.

Allowed values:
0: Inactive: Force option byte loading inactive
1: Active: Force option byte loading active

Flash address register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 FAR
w 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 FAR
w Toggle fields FAR

Bits 0-31: Flash address.

Allowed values: 0x0-0xffffffff

OBR

Option byte register

Offset: 0x1c, size: 32, reset: 0x03FFFFF2, access: read-only

12/12 fields covered.

Toggle fields OPTERR

Bit 0: Option byte error.

Allowed values:
1: OptionByteError: The loaded option byte and its complement do not match

RDPRT

Bits 1-2: Read protection level status.

Allowed values:
0: Level0: Level 0
1: Level1: Level 1
3: Level2: Level 2

WDG_SW

Bit 8: WDG_SW.

Allowed values:
0: Hardware: Hardware watchdog
1: Software: Software watchdog

nRST_STOP

Bit 9: nRST_STOP.

Allowed values:
0: Reset: Reset generated when entering Stop mode
1: NoReset: No reset generated

nRST_STDBY

Bit 10: nRST_STDBY.

Allowed values:
0: Reset: Reset generated when entering Standby mode
1: NoReset: No reset generated

nBOOT0

Bit 11: nBOOT0.

Allowed values:
0: Disabled: When BOOT_SEL is cleared, select the device boot mode
1: Enabled: When BOOT_SEL is cleared, select the device boot mode

nBOOT1

Bit 12: BOOT1.

Allowed values:
0: Disabled: Together with BOOT0, select the device boot mode
1: Enabled: Together with BOOT0, select the device boot mode

VDDA_MONITOR

Bit 13: VDDA_MONITOR.

Allowed values:
0: Disabled: VDDA power supply supervisor disabled
1: Enabled: VDDA power supply supervisor enabled

RAM_PARITY_CHECK

Bit 14: RAM_PARITY_CHECK.

Allowed values:
0: Enabled: RAM parity check enabled
1: Disabled: RAM parity check disabled

BOOT_SEL

Bit 15: BOOT_SEL.

Allowed values:
0: nBOOT0: BOOT0 signal is defined by nBOOT0 option bit
1: BOOT0: BOOT0 signal is defined by BOOT0 pin value (legacy mode)

Data0

Bits 16-23: Data0.

Allowed values: 0x0-0xff

Data1

Bits 24-31: Data1.

Allowed values: 0x0-0xff

WRPR

Write protection register

Offset: 0x20, size: 32, reset: 0xFFFFFFFF, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 WRP
r 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 WRP
r Toggle fields WRP

Bits 0-31: Write protect.

Allowed values: 0x0-0xffffffff

GPIOA

0x48000000: General-purpose I/Os

177/177 fields covered.

Toggle register map Toggle registers MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x28000000, access: read-write

16/16 fields covered.

Toggle fields MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x24000000, access: read-write

16/16 fields covered.

Toggle fields PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

Toggle fields IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

Toggle fields BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

Toggle fields LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

BRR

Port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: write-only

16/16 fields covered.

Toggle fields BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

GPIOB

0x48000400: General-purpose I/Os

177/177 fields covered.

Toggle register map Toggle registers MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

Toggle fields IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

Toggle fields BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

Toggle fields LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

BRR

Port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: write-only

16/16 fields covered.

Toggle fields BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

GPIOC

0x48000800: General-purpose I/Os

177/177 fields covered.

Toggle register map Toggle registers MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

Toggle fields IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

Toggle fields BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

Toggle fields LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

BRR

Port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: write-only

16/16 fields covered.

Toggle fields BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

GPIOD

0x48000c00: General-purpose I/Os

177/177 fields covered.

Toggle register map Toggle registers MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

Toggle fields IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

Toggle fields BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

Toggle fields LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

BRR

Port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: write-only

16/16 fields covered.

Toggle fields BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

GPIOE

0x48001000: General-purpose I/Os

177/177 fields covered.

Toggle register map Toggle registers MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

Toggle fields IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

Toggle fields BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

Toggle fields LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

BRR

Port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: write-only

16/16 fields covered.

Toggle fields BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

GPIOF

0x48001400: General-purpose I/Os

177/177 fields covered.

Toggle register map Toggle registers MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

Toggle fields IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

Toggle fields ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

Toggle fields BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

Toggle fields LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

BRR

Port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: write-only

16/16 fields covered.

Toggle fields BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the ODx bit

I2C1

0x40005400: Inter-integrated circuit

76/77 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: Unspecified

20/21 fields covered.

Toggle fields PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

Allowed values:
0: NoFilter: Digital filter disabled
1: Filter1: Digital filter enabled and filtering capability up to 1 tI2CCLK
2: Filter2: Digital filter enabled and filtering capability up to 2 tI2CCLK
3: Filter3: Digital filter enabled and filtering capability up to 3 tI2CCLK
4: Filter4: Digital filter enabled and filtering capability up to 4 tI2CCLK
5: Filter5: Digital filter enabled and filtering capability up to 5 tI2CCLK
6: Filter6: Digital filter enabled and filtering capability up to 6 tI2CCLK
7: Filter7: Digital filter enabled and filtering capability up to 7 tI2CCLK
8: Filter8: Digital filter enabled and filtering capability up to 8 tI2CCLK
9: Filter9: Digital filter enabled and filtering capability up to 9 tI2CCLK
10: Filter10: Digital filter enabled and filtering capability up to 10 tI2CCLK
11: Filter11: Digital filter enabled and filtering capability up to 11 tI2CCLK
12: Filter12: Digital filter enabled and filtering capability up to 12 tI2CCLK
13: Filter13: Digital filter enabled and filtering capability up to 13 tI2CCLK
14: Filter14: Digital filter enabled and filtering capability up to 14 tI2CCLK
15: Filter15: Digital filter enabled and filtering capability up to 15 tI2CCLK

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

SWRST

Bit 13: Software reset.

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

Allowed values:
0: Disabled: In device mode (SMBHEN=Disabled) Releases SMBA pin high and Alert Response Address Header disabled (0001100x) followed by NACK. In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) not supported
1: Enabled: In device mode (SMBHEN=Disabled) Drives SMBA pin low and Alert Response Address Header enabled (0001100x) followed by ACK.In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) supported

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

11/11 fields covered.

Toggle fields SADD

Bits 0-9: Slave address bit 9:8 (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

Allowed values:
0: Complete: The master sends the complete 10 bit slave address read sequence
1: Partial: The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

Allowed values:
0: Completed: The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)
1: NotCompleted: The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)

AUTOEND

Bit 25: Automatic end mode (master mode).

Allowed values:
0: Software: Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low
1: Automatic: Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

Allowed values:
0: NoMask: No mask
1: Mask1: OA2[1] is masked and don’t care. Only OA2[7:2] are compared
2: Mask2: OA2[2:1] are masked and don’t care. Only OA2[7:3] are compared
3: Mask3: OA2[3:1] are masked and don’t care. Only OA2[7:4] are compared
4: Mask4: OA2[4:1] are masked and don’t care. Only OA2[7:5] are compared
5: Mask5: OA2[5:1] are masked and don’t care. Only OA2[7:6] are compared
6: Mask6: OA2[6:1] are masked and don’t care. Only OA2[7] is compared.
7: Mask7: OA2[7:1] are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRESC
rw SCLDEL
rw SDADEL
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SCLH
rw SCLL
rw Toggle fields SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, size: 32, reset: 0x00000001, access: Unspecified

17/17 fields covered.

Toggle fields TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

9/9 fields covered.

Toggle fields ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PEC
r Toggle fields PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RXDATA
r Toggle fields RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TXDATA
rw Toggle fields TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

I2C2

0x40005800: Inter-integrated circuit

76/77 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: Unspecified

20/21 fields covered.

Toggle fields PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

SWRST

Bit 13: Software reset.

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

11/11 fields covered.

Toggle fields SADD

Bits 0-9: Slave address bit 9:8 (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

AUTOEND

Bit 25: Automatic end mode (master mode).

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRESC
rw SCLDEL
rw SDADEL
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SCLH
rw SCLL
rw Toggle fields SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, size: 32, reset: 0x00000001, access: Unspecified

17/17 fields covered.

Toggle fields TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

9/9 fields covered.

Toggle fields ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PEC
r Toggle fields PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RXDATA
r Toggle fields RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TXDATA
rw Toggle fields TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

IWDG

0x40003000: Independent watchdog

7/7 fields covered.

Toggle register map Offset Name

0x0 (16-bit) KR KEY 0x4 (16-bit) PR PR 0x8 (16-bit) RLR RL 0xc (16-bit) SR WVU RVU PVU 0x10 (16-bit) WINR WIN Toggle registers KR

Key register

Offset: 0x0, size: 16, reset: 0x00000000, access: write-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 KEY
w Toggle fields KEY

Bits 0-15: Key value.

Allowed values:
21845: Unlock: Enable access to PR, RLR and WINR registers
43690: Feed: Feed watchdog with RLR register value
52428: Start: Start the watchdog

Prescaler register

Offset: 0x4, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PR
rw Toggle fields PR

Bits 0-2: Prescaler divider.

Allowed values:
0: DivideBy4: Divider /4
1: DivideBy8: Divider /8
2: DivideBy16: Divider /16
3: DivideBy32: Divider /32
4: DivideBy64: Divider /64
5: DivideBy128: Divider /128
6 (+): DivideBy256: Divider /256

RLR

Reload register

Offset: 0x8, size: 16, reset: 0x00000FFF, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RL
rw Toggle fields RL

Bits 0-11: Watchdog counter reload value.

Allowed values: 0x0-0xfff

Status register

Offset: 0xc, size: 16, reset: 0x00000000, access: read-only

3/3 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 WVU
r RVU
r PVU
r Toggle fields PVU

Bit 0: Watchdog prescaler value update.

RVU

Bit 1: Watchdog counter reload value update.

WVU

Bit 2: Watchdog counter window value update.

WINR

Window register

Offset: 0x10, size: 16, reset: 0x00000FFF, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 WIN
rw Toggle fields WIN

Bits 0-11: Watchdog counter window value.

Allowed values: 0x0-0xfff

NVIC

0xe000e100: Nested Vectored Interrupt Controller

0/36 fields covered.

Toggle register map Toggle registers ISER

Interrupt Set Enable Register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 SETENA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SETENA
rw Toggle fields SETENA

Bits 0-31: SETENA.

ICER

Interrupt Clear Enable Register

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CLRENA
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CLRENA
rw Toggle fields CLRENA

Bits 0-31: CLRENA.

ISPR

Interrupt Set-Pending Register

Offset: 0x100, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 SETPEND
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SETPEND
rw Toggle fields SETPEND

Bits 0-31: SETPEND.

ICPR

Interrupt Clear-Pending Register

Offset: 0x180, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CLRPEND
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CLRPEND
rw Toggle fields CLRPEND

Bits 0-31: CLRPEND.

IPR0

Interrupt Priority Register 0

Offset: 0x300, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRI_03
rw PRI_02
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PRI_01
rw PRI_00
rw Toggle fields PRI_00

Bits 6-7: PRI_00.

PRI_01

Bits 14-15: PRI_01.

PRI_02

Bits 22-23: PRI_02.

PRI_03

Bits 30-31: PRI_03.

IPR1

Interrupt Priority Register 1

Offset: 0x304, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRI_43
rw PRI_42
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PRI_41
rw PRI_40
rw Toggle fields PRI_40

Bits 6-7: PRI_40.

PRI_41

Bits 14-15: PRI_41.

PRI_42

Bits 22-23: PRI_42.

PRI_43

Bits 30-31: PRI_43.

IPR2

Interrupt Priority Register 2

Offset: 0x308, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRI_83
rw PRI_82
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PRI_81
rw PRI_80
rw Toggle fields PRI_80

Bits 6-7: PRI_80.

PRI_81

Bits 14-15: PRI_81.

PRI_82

Bits 22-23: PRI_82.

PRI_83

Bits 30-31: PRI_83.

IPR3

Interrupt Priority Register 3

Offset: 0x30c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields PRI_120

Bits 6-7: PRI_120.

PRI_121

Bits 14-15: PRI_121.

PRI_122

Bits 22-23: PRI_122.

PRI_123

Bits 30-31: PRI_123.

IPR4

Interrupt Priority Register 4

Offset: 0x310, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields PRI_160

Bits 6-7: PRI_160.

PRI_161

Bits 14-15: PRI_161.

PRI_162

Bits 22-23: PRI_162.

PRI_163

Bits 30-31: PRI_163.

IPR5

Interrupt Priority Register 5

Offset: 0x314, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields PRI_200

Bits 6-7: PRI_200.

PRI_201

Bits 14-15: PRI_201.

PRI_202

Bits 22-23: PRI_202.

PRI_203

Bits 30-31: PRI_203.

IPR6

Interrupt Priority Register 6

Offset: 0x318, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields PRI_240

Bits 6-7: PRI_240.

PRI_241

Bits 14-15: PRI_241.

PRI_242

Bits 22-23: PRI_242.

PRI_243

Bits 30-31: PRI_243.

IPR7

Interrupt Priority Register 7

Offset: 0x31c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields PRI_280

Bits 6-7: PRI_280.

PRI_281

Bits 14-15: PRI_281.

PRI_282

Bits 22-23: PRI_282.

PRI_283

Bits 30-31: PRI_283.

PWR

0x40007000: Power control

5/19 fields covered.

Toggle register map Toggle registers CR

power control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

1/7 fields covered.

Toggle fields LPDS

Bit 0: Low-power deep sleep.

PDDS

Bit 1: Power down deepsleep.

Allowed values:
0: STOP_MODE: Enter Stop mode when the CPU enters deepsleep
1: STANDBY_MODE: Enter Standby mode when the CPU enters deepsleep

CWUF

Bit 2: Clear wakeup flag.

CSBF

Bit 3: Clear standby flag.

PVDE

Bit 4: Power voltage detector enable.

PLS

Bits 5-7: PVD level selection.

DBP

Bit 8: Disable backup domain write protection.

CSR

power control/status register

Offset: 0x4, size: 32, reset: 0x00000000, access: Unspecified

4/12 fields covered.

Toggle fields WUF

Bit 0: Wakeup flag.

SBF

Bit 1: Standby flag.

PVDO

Bit 2: PVD output.

VREFINTRDY

Bit 3: VREFINT reference voltage ready.

EWUP1

Bit 8: Enable WKUP pin 1.

EWUP2

Bit 9: Enable WKUP pin 2.

EWUP3

Bit 10: Enable WKUP pin 3.

EWUP4

Bit 11: Enable WKUP pin 4.

EWUP5

Bit 12: Enable WKUP pin 5.

EWUP6

Bit 13: Enable WKUP pin 6.

EWUP7

Bit 14: Enable WKUP pin 7.

EWUP8

Bit 15: Enable WKUP pin 8.

RCC

0x40021000: Reset and clock control

157/159 fields covered.

Toggle register map Toggle registers CR

Clock control register

Offset: 0x0, size: 32, reset: 0x00000083, access: Unspecified

10/10 fields covered.

Toggle fields HSION

Bit 0: Internal High Speed clock enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

HSIRDY

Bit 1: Internal High Speed clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

HSITRIM

Bits 3-7: Internal High Speed clock trimming.

Allowed values: 0x0-0x1f

HSICAL

Bits 8-15: Internal High Speed clock Calibration.

Allowed values: 0x0-0xff

HSEON

Bit 16: External High Speed clock enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

HSERDY

Bit 17: External High Speed clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

HSEBYP

Bit 18: External High Speed clock Bypass.

Allowed values:
0: NotBypassed: HSE crystal oscillator not bypassed
1: Bypassed: HSE crystal oscillator bypassed with external clock

CSSON

Bit 19: Clock Security System enable.

Allowed values:
0: Off: Clock security system disabled (clock detector OFF)
1: On: Clock security system enable (clock detector ON if the HSE is ready, OFF if not)

PLLON

Bit 24: PLL enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

PLLRDY

Bit 25: PLL clock ready flag.

Allowed values:
0: NotReady: Clock not ready
1: Ready: Clock ready

CFGR

Clock configuration register (RCC_CFGR)

Offset: 0x4, size: 32, reset: 0x00000000, access: Unspecified

10/11 fields covered.

Toggle fields SW

Bits 0-1: System clock Switch.

Allowed values:
0: HSI: HSI selected as system clock
1: HSE: HSE selected as system clock
2: PLL: PLL selected as system clock
3: HSI48: HSI48 selected as system clock (when available)

SWS

Bits 2-3: System Clock Switch Status.

Allowed values:
0: HSI: HSI oscillator used as system clock
1: HSE: HSE oscillator used as system clock
2: PLL: PLL used as system clock
3: HSI48: HSI48 used as system clock (when avaiable)

HPRE

Bits 4-7: AHB prescaler.

Allowed values:
8: Div2: SYSCLK divided by 2
9: Div4: SYSCLK divided by 4
10: Div8: SYSCLK divided by 8
11: Div16: SYSCLK divided by 16
12: Div64: SYSCLK divided by 64
13: Div128: SYSCLK divided by 128
14: Div256: SYSCLK divided by 256
15: Div512: SYSCLK divided by 512
0 (+): Div1: SYSCLK not divided

PPRE

Bits 8-10: APB Low speed prescaler (APB1).

Allowed values:
4: Div2: HCLK divided by 2
5: Div4: HCLK divided by 4
6: Div8: HCLK divided by 8
7: Div16: HCLK divided by 16
0 (+): Div1: HCLK not divided

ADCPRE

Bit 14: ADCPRE is deprecated. See ADC field in CFGR2 register..

PLLSRC

Bits 15-16: PLL input clock source.

Allowed values:
0: HSI_Div2: HSI divided by 2 selected as PLL input clock
1: HSI_Div_PREDIV: HSI divided by PREDIV selected as PLL input clock
2: HSE_Div_PREDIV: HSE divided by PREDIV selected as PLL input clock
3: HSI48_Div_PREDIV: HSI48 divided by PREDIV selected as PLL input clock

PLLXTPRE

Bit 17: HSE divider for PLL entry. Same bit as PREDIC[0] from CFGR2 register. Refer to it for its meaning.

Allowed values:
0: Div1: HSE clock not divided
1: Div2: HSE clock divided by 2

PLLMUL

Bits 18-21: PLL Multiplication Factor.

Allowed values:
0: Mul2: PLL input clock x2
1: Mul3: PLL input clock x3
2: Mul4: PLL input clock x4
3: Mul5: PLL input clock x5
4: Mul6: PLL input clock x6
5: Mul7: PLL input clock x7
6: Mul8: PLL input clock x8
7: Mul9: PLL input clock x9
8: Mul10: PLL input clock x10
9: Mul11: PLL input clock x11
10: Mul12: PLL input clock x12
11: Mul13: PLL input clock x13
12: Mul14: PLL input clock x14
13: Mul15: PLL input clock x15
14: Mul16: PLL input clock x16
15: Mul16x: PLL input clock x16

MCO

Bits 24-27: Microcontroller clock output.

Allowed values:
0: NoMCO: MCO output disabled, no clock on MCO
1: HSI14: Internal RC 14 MHz (HSI14) oscillator clock selected
2: LSI: Internal low speed (LSI) oscillator clock selected
3: LSE: External low speed (LSE) oscillator clock selected
4: SYSCLK: System clock selected
5: HSI: Internal RC 8 MHz (HSI) oscillator clock selected
6: HSE: External 4-32 MHz (HSE) oscillator clock selected
7: PLL: PLL clock selected (divided by 1 or 2, depending en PLLNODIV)
8: HSI48: Internal RC 48 MHz (HSI48) oscillator clock selected

MCOPRE

Bits 28-30: Microcontroller Clock Output Prescaler.

Allowed values:
0: Div1: MCO is divided by 1
1: Div2: MCO is divided by 2
2: Div4: MCO is divided by 4
3: Div8: MCO is divided by 8
4: Div16: MCO is divided by 16
5: Div32: MCO is divided by 32
6: Div64: MCO is divided by 64
7: Div128: MCO is divided by 128

PLLNODIV

Bit 31: PLL clock not divided for MCO.

Allowed values:
0: Div2: PLL is divided by 2 for MCO
1: Div1: PLL is not divided for MCO

CIR

Clock interrupt register (RCC_CIR)

Offset: 0x8, size: 32, reset: 0x00000000, access: Unspecified

23/23 fields covered.

Toggle fields LSIRDYF

Bit 0: LSI Ready Interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

LSERDYF

Bit 1: LSE Ready Interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

HSIRDYF

Bit 2: HSI Ready Interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

HSERDYF

Bit 3: HSE Ready Interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

PLLRDYF

Bit 4: PLL Ready Interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

HSI14RDYF

Bit 5: HSI14 ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

HSI48RDYF

Bit 6: HSI48 ready interrupt flag.

Allowed values:
0: NotInterrupted: No clock ready interrupt
1: Interrupted: Clock ready interrupt

CSSF

Bit 7: Clock Security System Interrupt flag.

Allowed values:
0: NotInterrupted: No clock security interrupt caused by HSE clock failure
1: Interrupted: Clock security interrupt caused by HSE clock failure

LSIRDYIE

Bit 8: LSI Ready Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

LSERDYIE

Bit 9: LSE Ready Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HSIRDYIE

Bit 10: HSI Ready Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HSERDYIE

Bit 11: HSE Ready Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

PLLRDYIE

Bit 12: PLL Ready Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HSI14RDYIE

Bit 13: HSI14 ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HSI48RDYIE

Bit 14: HSI48 ready interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

LSIRDYC

Bit 16: LSI Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

LSERDYC

Bit 17: LSE Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

HSIRDYC

Bit 18: HSI Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

HSERDYC

Bit 19: HSE Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

PLLRDYC

Bit 20: PLL Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

HSI14RDYC

Bit 21: HSI 14 MHz Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

HSI48RDYC

Bit 22: HSI48 Ready Interrupt Clear.

Allowed values:
1: Clear: Clear interrupt flag

CSSC

Bit 23: Clock security system interrupt clear.

Allowed values:
1: Clear: Clear CSSF flag

APB2RSTR

APB2 peripheral reset register (RCC_APB2RSTR)

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields SYSCFGRST

Bit 0: SYSCFG and COMP reset.

Allowed values:
1: Reset: Reset the selected module

USART6RST

Bit 5: USART6 reset.

Allowed values:
1: Reset: Reset the selected module

USART7RST

Bit 6: USART7 reset.

Allowed values:
1: Reset: Reset the selected module

USART8RST

Bit 7: USART8 reset.

Allowed values:
1: Reset: Reset the selected module

ADCRST

Bit 9: ADC interface reset.

Allowed values:
1: Reset: Reset the selected module

TIM1RST

Bit 11: TIM1 timer reset.

Allowed values:
1: Reset: Reset the selected module

SPI1RST

Bit 12: SPI 1 reset.

Allowed values:
1: Reset: Reset the selected module

USART1RST

Bit 14: USART1 reset.

Allowed values:
1: Reset: Reset the selected module

TIM15RST

Bit 16: TIM15 timer reset.

Allowed values:
1: Reset: Reset the selected module

TIM16RST

Bit 17: TIM16 timer reset.

Allowed values:
1: Reset: Reset the selected module

TIM17RST

Bit 18: TIM17 timer reset.

Allowed values:
1: Reset: Reset the selected module

DBGMCURST

Bit 22: Debug MCU reset.

Allowed values:
1: Reset: Reset the selected module

APB1RSTR

APB1 peripheral reset register (RCC_APB1RSTR)

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields TIM2RST

Bit 0: Timer 2 reset.

Allowed values:
1: Reset: Reset the selected module

TIM3RST

Bit 1: Timer 3 reset.

Allowed values:
1: Reset: Reset the selected module

TIM6RST

Bit 4: Timer 6 reset.

Allowed values:
1: Reset: Reset the selected module

TIM7RST

Bit 5: TIM7 timer reset.

Allowed values:
1: Reset: Reset the selected module

TIM14RST

Bit 8: Timer 14 reset.

Allowed values:
1: Reset: Reset the selected module

WWDGRST

Bit 11: Window watchdog reset.

Allowed values:
1: Reset: Reset the selected module

SPI2RST

Bit 14: SPI2 reset.

Allowed values:
1: Reset: Reset the selected module

USART2RST

Bit 17: USART 2 reset.

Allowed values:
1: Reset: Reset the selected module

USART3RST

Bit 18: USART3 reset.

Allowed values:
1: Reset: Reset the selected module

USART4RST

Bit 19: USART4 reset.

Allowed values:
1: Reset: Reset the selected module

USART5RST

Bit 20: USART5 reset.

Allowed values:
1: Reset: Reset the selected module

I2C1RST

Bit 21: I2C1 reset.

Allowed values:
1: Reset: Reset the selected module

I2C2RST

Bit 22: I2C2 reset.

Allowed values:
1: Reset: Reset the selected module

USBRST

Bit 23: USB interface reset.

Allowed values:
1: Reset: Reset the selected module

CANRST

Bit 25: CAN interface reset.

Allowed values:
1: Reset: Reset the selected module

CRSRST

Bit 27: Clock Recovery System interface reset.

Allowed values:
1: Reset: Reset the selected module

PWRRST

Bit 28: Power interface reset.

Allowed values:
1: Reset: Reset the selected module

DACRST

Bit 29: DAC interface reset.

Allowed values:
1: Reset: Reset the selected module

CECRST

Bit 30: HDMI CEC reset.

Allowed values:
1: Reset: Reset the selected module

AHBENR

AHB Peripheral Clock enable register (RCC_AHBENR)

Offset: 0x14, size: 32, reset: 0x00000014, access: read-write

12/12 fields covered.

Toggle fields DMAEN

Bit 0: DMA clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

DMA2EN

Bit 1: DMA2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SRAMEN

Bit 2: SRAM interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

FLITFEN

Bit 4: FLITF clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CRCEN

Bit 6: CRC clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

IOPAEN

Bit 17: I/O port A clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

IOPBEN

Bit 18: I/O port B clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

IOPCEN

Bit 19: I/O port C clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

IOPDEN

Bit 20: I/O port D clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

IOPEEN

Bit 21: I/O port E clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

IOPFEN

Bit 22: I/O port F clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TSCEN

Bit 24: Touch sensing controller clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

APB2ENR

APB2 peripheral clock enable register (RCC_APB2ENR)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields SYSCFGEN

Bit 0: SYSCFG clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART6EN

Bit 5: USART6 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART7EN

Bit 6: USART7 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART8EN

Bit 7: USART8 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

ADCEN

Bit 9: ADC 1 interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM1EN

Bit 11: TIM1 Timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI1EN

Bit 12: SPI 1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART1EN

Bit 14: USART1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM15EN

Bit 16: TIM15 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM16EN

Bit 17: TIM16 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM17EN

Bit 18: TIM17 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

DBGMCUEN

Bit 22: MCU debug module clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

APB1ENR

APB1 peripheral clock enable register (RCC_APB1ENR)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields TIM2EN

Bit 0: Timer 2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM3EN

Bit 1: Timer 3 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM6EN

Bit 4: Timer 6 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM7EN

Bit 5: TIM7 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIM14EN

Bit 8: Timer 14 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

WWDGEN

Bit 11: Window watchdog clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI2EN

Bit 14: SPI 2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART2EN

Bit 17: USART 2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART3EN

Bit 18: USART3 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART4EN

Bit 19: USART4 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART5EN

Bit 20: USART5 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C1EN

Bit 21: I2C 1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C2EN

Bit 22: I2C 2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USBEN

Bit 23: USB interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CANEN

Bit 25: CAN interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CRSEN

Bit 27: Clock Recovery System interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PWREN

Bit 28: Power interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

DACEN

Bit 29: DAC interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CECEN

Bit 30: HDMI CEC interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

BDCR

Backup domain control register (RCC_BDCR)

Offset: 0x20, size: 32, reset: 0x00000000, access: Unspecified

7/7 fields covered.

Toggle fields LSEON

Bit 0: External Low Speed oscillator enable.

Allowed values:
0: Off: LSE oscillator Off
1: On: LSE oscillator On

LSERDY

Bit 1: External Low Speed oscillator ready.

Allowed values:
0: NotReady: LSE oscillator not ready
1: Ready: LSE oscillator ready

LSEBYP

Bit 2: External Low Speed oscillator bypass.

Allowed values:
0: NotBypassed: LSE crystal oscillator not bypassed
1: Bypassed: LSE crystal oscillator bypassed with external clock

LSEDRV

Bits 3-4: LSE oscillator drive capability.

Allowed values:
0: Low: Low drive capacity
1: MediumHigh: Medium-high drive capacity
2: MediumLow: Medium-low drive capacity
3: High: High drive capacity

RTCSEL

Bits 8-9: RTC clock source selection.

Allowed values:
0: NoClock: No clock
1: LSE: LSE oscillator clock used as RTC clock
2: LSI: LSI oscillator clock used as RTC clock
3: HSE: HSE oscillator clock divided by a prescaler used as RTC clock

RTCEN

Bit 15: RTC clock enable.

Allowed values:
0: Disabled: RTC clock disabled
1: Enabled: RTC clock enabled

BDRST

Bit 16: Backup domain software reset.

Allowed values:
0: Disabled: Reset not activated
1: Enabled: Reset the entire RTC domain

CSR

Control/status register (RCC_CSR)

Offset: 0x24, size: 32, reset: 0x0C000000, access: Unspecified

11/11 fields covered.

Toggle fields LSION

Bit 0: Internal low speed oscillator enable.

Allowed values:
0: Off: LSI oscillator Off
1: On: LSI oscillator On

LSIRDY

Bit 1: Internal low speed oscillator ready.

Allowed values:
0: NotReady: LSI oscillator not ready
1: Ready: LSI oscillator ready

V18PWRRSTF

Bit 23: 1.8 V domain reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

RMVF

Bit 24: Remove reset flag.

Allowed values:
1: Clear: Clears the reset flag

OBLRSTF

Bit 25: Option byte loader reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

PINRSTF

Bit 26: PIN reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

PORRSTF

Bit 27: POR/PDR reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

SFTRSTF

Bit 28: Software reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

IWDGRSTF

Bit 29: Independent watchdog reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

WWDGRSTF

Bit 30: Window watchdog reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

LPWRRSTF

Bit 31: Low-power reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

AHBRSTR

AHB peripheral reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

Toggle fields IOPARST

Bit 17: I/O port A reset.

Allowed values:
1: Reset: Reset the selected module

IOPBRST

Bit 18: I/O port B reset.

Allowed values:
1: Reset: Reset the selected module

IOPCRST

Bit 19: I/O port C reset.

Allowed values:
1: Reset: Reset the selected module

IOPDRST

Bit 20: I/O port D reset.

Allowed values:
1: Reset: Reset the selected module

IOPERST

Bit 21: I/O port E reset.

Allowed values:
1: Reset: Reset the selected module

IOPFRST

Bit 22: I/O port F reset.

Allowed values:
1: Reset: Reset the selected module

TSCRST

Bit 24: Touch sensing controller reset.

Allowed values:
1: Reset: Reset the selected module

CFGR2

Clock configuration register 2

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PREDIV
rw Toggle fields PREDIV

Bits 0-3: PREDIV division factor.

Allowed values:
0: Div1: PREDIV input clock not divided
1: Div2: PREDIV input clock divided by 2
2: Div3: PREDIV input clock divided by 3
3: Div4: PREDIV input clock divided by 4
4: Div5: PREDIV input clock divided by 5
5: Div6: PREDIV input clock divided by 6
6: Div7: PREDIV input clock divided by 7
7: Div8: PREDIV input clock divided by 8
8: Div9: PREDIV input clock divided by 9
9: Div10: PREDIV input clock divided by 10
10: Div11: PREDIV input clock divided by 11
11: Div12: PREDIV input clock divided by 12
12: Div13: PREDIV input clock divided by 13
13: Div14: PREDIV input clock divided by 14
14: Div15: PREDIV input clock divided by 15
15: Div16: PREDIV input clock divided by 16

CFGR3

Clock configuration register 3

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

6/7 fields covered.

Toggle fields USART1SW

Bits 0-1: USART1 clock source selection.

Allowed values:
0: PCLK: PCLK selected as USART clock source
1: SYSCLK: SYSCLK selected as USART clock source
2: LSE: LSE selected as USART clock source
3: HSI: HSI selected as USART clock source

I2C1SW

Bit 4: I2C1 clock source selection.

Allowed values:
0: HSI: HSI clock selected as I2C clock source
1: SYSCLK: SYSCLK clock selected as I2C clock source

CECSW

Bit 6: HDMI CEC clock source selection.

Allowed values:
0: HSI_Div244: HSI clock divided by 244 selected as CEC clock source
1: LSE: LSE clock selected as CEC clock source

USBSW

Bit 7: USB clock source selection.

Allowed values:
0: HSI48: HSI48 selected as USB clock source
1: PLLCLK: PLL clock selected as USB clock source

ADCSW

Bit 8: ADCSW is deprecated. See ADC field in CFGR2 register..

USART2SW

Bits 16-17: USART2 clock source selection.

USART3SW

Bits 18-19: USART3 clock source.

CR2

Clock control register 2

Offset: 0x34, size: 32, reset: 0x00000080, access: Unspecified

8/8 fields covered.

Toggle fields HSI14ON

Bit 0: HSI14 clock enable.

Allowed values:
0: Off: HSI14 oscillator off
1: On: HSI14 oscillator on

HSI14RDY

Bit 1: HR14 clock ready flag.

Allowed values:
0: NotReady: HSI14 oscillator not ready
1: Ready: HSI14 oscillator ready

HSI14DIS

Bit 2: HSI14 clock request from ADC disable.

Allowed values:
0: Allow: ADC can turn on the HSI14 oscillator
1: Disallow: ADC can not turn on the HSI14 oscillator

HSI14TRIM

Bits 3-7: HSI14 clock trimming.

Allowed values: 0x0-0x1f

HSI14CAL

Bits 8-15: HSI14 clock calibration.

Allowed values: 0x0-0xff

HSI48ON

Bit 16: HSI48 clock enable.

Allowed values:
0: Off: HSI48 oscillator off
1: On: HSI48 oscillator on

HSI48RDY

Bit 17: HSI48 clock ready flag.

Allowed values:
0: NotReady: HSI48 oscillator ready
1: Ready: HSI48 oscillator ready

HSI48CAL

Bits 24-31: HSI48 factory clock calibration.

Allowed values: 0x0-0xff

RTC

0x40002800: Real-time clock

75/103 fields covered.

Toggle register map Toggle registers TR

time register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PM
rw HT
rw HU
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MNT
rw MNU
rw ST
rw SU
rw Toggle fields SU

Bits 0-3: Second units in BCD format.

Allowed values: 0x0-0xf

Bits 4-6: Second tens in BCD format.

Allowed values: 0x0-0x7

MNU

Bits 8-11: Minute units in BCD format.

Allowed values: 0x0-0xf

MNT

Bits 12-14: Minute tens in BCD format.

Allowed values: 0x0-0x7

Bits 16-19: Hour units in BCD format.

Allowed values: 0x0-0xf

Bits 20-21: Hour tens in BCD format.

Allowed values: 0x0-0x3

Bit 22: AM/PM notation.

Allowed values:
0: AM: AM or 24-hour format
1: PM: PM

date register

Offset: 0x4, size: 32, reset: 0x00002101, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 YT
rw YU
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 WDU
rw MT
rw MU
rw DT
rw DU
rw Toggle fields DU

Bits 0-3: Date units in BCD format.

Allowed values: 0x0-0xf

Bits 4-5: Date tens in BCD format.

Allowed values: 0x0-0x3

Bits 8-11: Month units in BCD format.

Allowed values: 0x0-0xf

Bit 12: Month tens in BCD format.

Allowed values:
0: Zero: Month tens is 0
1: One: Month tens is 1

WDU

Bits 13-15: Week day units.

Allowed values: 0x1-0x7

Bits 16-19: Year units in BCD format.

Allowed values: 0x0-0xf

Bits 20-23: Year tens in BCD format.

Allowed values: 0x0-0xf

control register

Offset: 0x8, size: 32, reset: 0x00000000, access: Unspecified

13/15 fields covered.

Toggle fields TSEDGE

Bit 3: Time-stamp event active edge.

Allowed values:
0: RisingEdge: RTC_TS input rising edge generates a time-stamp event
1: FallingEdge: RTC_TS input falling edge generates a time-stamp event

REFCKON

Bit 4: RTC_REFIN reference clock detection enable (50 or 60 Hz).

Allowed values:
0: Disabled: RTC_REFIN detection disabled
1: Enabled: RTC_REFIN detection enabled

BYPSHAD

Bit 5: Bypass the shadow registers.

FMT

Bit 6: Hour format.

Allowed values:
0: Twenty_Four_Hour: 24 hour/day format
1: AM_PM: AM/PM hour format

ALRAE

Bit 8: Alarm A enable.

Allowed values:
0: Disabled: Alarm disabled
1: Enabled: Alarm enabled

TSE

Bit 11: timestamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

ALRAIE

Bit 12: Alarm A interrupt enable.

Allowed values:
0: Disabled: Alarm Interrupt disabled
1: Enabled: Alarm Interrupt enabled

TSIE

Bit 15: Time-stamp interrupt enable.

Allowed values:
0: Disabled: Time-stamp Interrupt disabled
1: Enabled: Time-stamp Interrupt enabled

ADD1H

Bit 16: Add 1 hour (summer time change).

Allowed values:
1: Add1: Adds 1 hour to the current time. This can be used for summer time change outside initialization mode

SUB1H

Bit 17: Subtract 1 hour (winter time change).

Allowed values:
1: Sub1: Subtracts 1 hour to the current time. This can be used for winter time change outside initialization mode

BKP

Bit 18: Backup.

Allowed values:
0: DST_Not_Changed: Daylight Saving Time change has not been performed
1: DST_Changed: Daylight Saving Time change has been performed

COSEL

Bit 19: Calibration output selection.

POL

Bit 20: Output polarity.

Allowed values:
0: High: The pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL[1:0])
1: Low: The pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL[1:0])

OSEL

Bits 21-22: Output selection.

Allowed values:
0: Disabled: Output disabled
1: AlarmA: Alarm A output enabled
2: AlarmB: Alarm B output enabled
3: Wakeup: Wakeup output enabled

COE

Bit 23: Calibration output enable.

Allowed values:
0: Disabled: Calibration output disabled
1: Enabled: Calibration output enabled

ISR

initialization and status register

Offset: 0xc, size: 32, reset: 0x00000007, access: Unspecified

11/12 fields covered.

Toggle fields ALRAWF

Bit 0: Alarm A write flag.

Allowed values:
0: UpdateNotAllowed: Alarm update not allowed
1: UpdateAllowed: Alarm update allowed

SHPF

Bit 3: Shift operation pending.

INITS

Bit 4: Initialization status flag.

Allowed values:
0: NotInitalized: Calendar has not been initialized
1: Initalized: Calendar has been initialized

RSF

Bit 5: Registers synchronization flag.

Allowed values:
0: NotSynced: Calendar shadow registers not yet synchronized
1: Synced: Calendar shadow registers synchronized

INITF

Bit 6: Initialization flag.

Allowed values:
0: NotAllowed: Calendar registers update is not allowed
1: Allowed: Calendar registers update is allowed

INIT

Bit 7: Initialization mode.

Allowed values:
0: FreeRunningMode: Free running mode
1: InitMode: Initialization mode used to program time and date register (RTC_TR and RTC_DR), and prescaler register (RTC_PRER). Counters are stopped and start counting from the new value when INIT is reset.

ALRAF

Bit 8: Alarm A flag.

Allowed values:
1: Match: This flag is set by hardware when the time/date registers (RTC_TR and RTC_DR) match the Alarm register (RTC_ALRMxR)

TSF

Bit 11: Time-stamp flag.

Allowed values:
1: TimestampEvent: This flag is set by hardware when a time-stamp event occurs

TSOVF

Bit 12: Time-stamp overflow flag.

Allowed values:
1: Overflow: This flag is set by hardware when a time-stamp event occurs while TSF is already set

TAMP1F

Bit 13: RTC_TAMP1 detection flag.

Allowed values:
1: Tampered: This flag is set by hardware when a tamper detection event is detected on the RTC_TAMPx input

TAMP2F

Bit 14: RTC_TAMP2 detection flag.

Allowed values:
1: Tampered: This flag is set by hardware when a tamper detection event is detected on the RTC_TAMPx input

RECALPF

Bit 16: Recalibration pending Flag.

PRER

prescaler register

Offset: 0x10, size: 32, reset: 0x007F00FF, access: read-write

1/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PREDIV_A
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PREDIV_S
rw Toggle fields PREDIV_S

Bits 0-14: Synchronous prescaler factor.

PREDIV_A

Bits 16-22: Asynchronous prescaler factor.

Allowed values: 0x0-0x7f

ALRMAR

alarm A register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

14/14 fields covered.

Toggle fields SU

Bits 0-3: Second units in BCD format..

Allowed values: 0x0-0xf

Bits 4-6: Second tens in BCD format..

Allowed values: 0x0-0x7

MSK1

Bit 7: Alarm A seconds mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

MNU

Bits 8-11: Minute units in BCD format..

Allowed values: 0x0-0xf

MNT

Bits 12-14: Minute tens in BCD format..

Allowed values: 0x0-0x7

MSK2

Bit 15: Alarm A minutes mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

Bits 16-19: Hour units in BCD format..

Allowed values: 0x0-0xf

Bits 20-21: Hour tens in BCD format..

Allowed values: 0x0-0x3

Bit 22: AM/PM notation.

Allowed values:
0: AM: AM or 24-hour format
1: PM: PM

MSK3

Bit 23: Alarm A hours mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

Bits 24-27: Date units or day in BCD format..

Allowed values: 0x0-0xf

Bits 28-29: Date tens in BCD format..

Allowed values: 0x0-0x3

WDSEL

Bit 30: Week day selection.

Allowed values:
0: DateUnits: DU[3:0] represents the date units
1: WeekDay: DU[3:0] represents the week day. DT[1:0] is don’t care.

MSK4

Bit 31: Alarm A date mask.

Allowed values:
0: Mask: Alarm set if the date/day match
1: NotMask: Date/day don’t care in Alarm comparison

WPR

write protection register

Offset: 0x24, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 KEY
w Toggle fields KEY

Bits 0-7: Write protection key.

Allowed values: 0x0-0xff

SSR

sub second register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SS
r Toggle fields SS

Bits 0-15: Sub second value.

SHIFTR

shift control register

Offset: 0x2c, size: 32, reset: 0x00000000, access: write-only

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 ADD1S
w 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SUBFS
w Toggle fields SUBFS

Bits 0-14: Subtract a fraction of a second.

ADD1S

Bit 31: Add one second.

TSTR

timestamp time register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PM
rw HT
rw HU
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MNT
rw MNU
rw ST
rw SU
rw Toggle fields SU

Bits 0-3: Second units in BCD format.

Allowed values: 0x0-0xf

Bits 4-6: Second tens in BCD format.

Allowed values: 0x0-0x7

MNU

Bits 8-11: Minute units in BCD format.

Allowed values: 0x0-0xf

MNT

Bits 12-14: Minute tens in BCD format.

Allowed values: 0x0-0x7

Bits 16-19: Hour units in BCD format.

Allowed values: 0x0-0xf

Bits 20-21: Hour tens in BCD format.

Allowed values: 0x0-0x3

Bit 22: AM/PM notation.

Allowed values:
0: AM: AM or 24-hour format
1: PM: PM

TSDR

timestamp date register

Offset: 0x34, size: 32, reset: 0x00002101, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 YT
rw YU
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 WDU
rw MT
rw MU
rw DT
rw DU
rw Toggle fields DU

Bits 0-3: Date units in BCD format.

Allowed values: 0x0-0xf

Bits 4-5: Date tens in BCD format.

Allowed values: 0x0-0x3

Bits 8-11: Month units in BCD format.

Allowed values: 0x0-0xf

Bit 12: Month tens in BCD format.

Allowed values:
0: Zero: Month tens is 0
1: One: Month tens is 1

WDU

Bits 13-15: Week day units.

Allowed values: 0x1-0x7

Bits 16-19: Year units in BCD format.

Allowed values: 0x0-0xf

Bits 20-23: Year tens in BCD format.

Allowed values: 0x0-0xf

TSSSR

time-stamp sub second register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SS
r Toggle fields SS

Bits 0-15: Sub second value.

CALR

calibration register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields CALM

Bits 0-8: Calibration minus.

CALW16

Bit 13: Use a 16-second calibration cycle period.

CALW8

Bit 14: Use an 8-second calibration cycle period.

CALP

Bit 15: Increase frequency of RTC by 488.5 ppm.

TAFCR

tamper and alternate function configuration register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

Toggle fields TAMP1E

Bit 0: RTC_TAMP1 input detection enable.

TAMP1TRG

Bit 1: Active level for RTC_TAMP1 input.

TAMPIE

Bit 2: Tamper interrupt enable.

TAMP2E

Bit 3: RTC_TAMP2 input detection enable.

TAMP2_TRG

Bit 4: Active level for RTC_TAMP2 input.

TAMPTS

Bit 7: Activate timestamp on tamper detection event.

TAMPFREQ

Bits 8-10: Tamper sampling frequency.

TAMPFLT

Bits 11-12: RTC_TAMPx filter count.

TAMP_PRCH

Bits 13-14: RTC_TAMPx precharge duration.

TAMP_PUDIS

Bit 15: RTC_TAMPx pull-up disable.

PC13VALUE

Bit 18: RTC_ALARM output type/PC13 value.

PC13MODE

Bit 19: PC13 mode.

PC14VALUE

Bit 20: PC14 value.

PC14MODE

Bit 21: PC14 mode.

PC15VALUE

Bit 22: PC15 value.

PC15MODE

Bit 23: PC15 mode.

ALRMASSR

alarm A sub second register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 MASKSS
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 SS
rw Toggle fields SS

Bits 0-14: Sub seconds value.

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

BKP[0]R

backup register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BKP
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BKP
rw Toggle fields BKP

Bits 0-31: BKP.

Allowed values: 0x0-0xffffffff

BKP[1]R

backup register

Offset: 0x54, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BKP
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BKP
rw Toggle fields BKP

Bits 0-31: BKP.

Allowed values: 0x0-0xffffffff

BKP[2]R

backup register

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BKP
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BKP
rw Toggle fields BKP

Bits 0-31: BKP.

Allowed values: 0x0-0xffffffff

BKP[3]R

backup register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BKP
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BKP
rw Toggle fields BKP

Bits 0-31: BKP.

Allowed values: 0x0-0xffffffff

BKP[4]R

backup register

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BKP
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BKP
rw Toggle fields BKP

Bits 0-31: BKP.

Allowed values: 0x0-0xffffffff

SCB

0xe000ed00: System control block

5/25 fields covered.

Toggle register map Toggle registers CPUID

CPUID base register

Offset: 0x0, size: 32, reset: 0x410FC241, access: read-only

5/5 fields covered.

Toggle fields Revision

Bits 0-3: Revision number.

PartNo

Bits 4-15: Part number of the processor.

Constant

Bits 16-19: Reads as 0xF.

Variant

Bits 20-23: Variant number.

Implementer

Bits 24-31: Implementer code.

ICSR

Interrupt control and state register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/8 fields covered.

Toggle fields VECTACTIVE

Bits 0-5: Active vector.

VECTPENDING

Bits 12-17: Pending vector.

ISRPENDING

Bit 22: Interrupt pending flag.

PENDSTCLR

Bit 25: SysTick exception clear-pending bit.

PENDSTSET

Bit 26: SysTick exception set-pending bit.

PENDSVCLR

Bit 27: PendSV clear-pending bit.

PENDSVSET

Bit 28: PendSV set-pending bit.

NMIPENDSET

Bit 31: NMI set-pending bit..

AIRCR

Application interrupt and reset control register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields VECTCLRACTIVE

Bit 1: VECTCLRACTIVE.

SYSRESETREQ

Bit 2: SYSRESETREQ.

ENDIANESS

Bit 15: ENDIANESS.

VECTKEYSTAT

Bits 16-31: Register key.

SCR

System control register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

Toggle fields SLEEPONEXIT

Bit 1: SLEEPONEXIT.

SLEEPDEEP

Bit 2: SLEEPDEEP.

SEVEONPEND

Bit 4: Send Event on Pending bit.

CCR

Configuration and control register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

Toggle fields UNALIGN__TRP

Bit 3: UNALIGN_ TRP.

STKALIGN

Bit 9: STKALIGN.

SHPR2

System handler priority registers

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRI_11
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Toggle fields PRI_11

Bits 24-31: Priority of system handler 11.

SHPR3

System handler priority registers

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 PRI_15
rw PRI_14
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Toggle fields PRI_14

Bits 16-23: Priority of system handler 14.

PRI_15

Bits 24-31: Priority of system handler 15.

SPI1

0x40013000: Serial peripheral interface

53/53 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 16, reset: 0x00000000, access: read-write

14/14 fields covered.

Toggle fields CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

Allowed values:
0: EightBit: 8-bit CRC length
1: SixteenBit: 16-bit CRC length

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, size: 16, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

Allowed values:
0: NoPulse: No NSS pulse
1: PulseGenerated: NSS pulse generated

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

Bits 8-11: Data size.

Allowed values:
3: FourBit: 4-bit
4: FiveBit: 5-bit
5: SixBit: 6-bit
6: SevenBit: 7-bit
7: EightBit: 8-bit
8: NineBit: 9-bit
9: TenBit: 10-bit
10: ElevenBit: 11-bit
11: TwelveBit: 12-bit
12: ThirteenBit: 13-bit
13: FourteenBit: 14-bit
14: FifteenBit: 15-bit
15: SixteenBit: 16-bit

FRXTH

Bit 12: FIFO reception threshold.

Allowed values:
0: Half: RXNE event is generated if the FIFO level is greater than or equal to 1/2 (16-bit)
1: Quarter: RXNE event is generated if the FIFO level is greater than or equal to 1/4 (8-bit)

LDMA_RX

Bit 13: Last DMA transfer for reception.

Allowed values:
0: Even: Number of data to transfer for receive is even
1: Odd: Number of data to transfer for receive is odd

LDMA_TX

Bit 14: Last DMA transfer for transmission.

Allowed values:
0: Even: Number of data to transfer for transmit is even
1: Odd: Number of data to transfer for transmit is odd

status register

Offset: 0x8, size: 16, reset: 0x00000002, access: Unspecified

11/11 fields covered.

Toggle fields RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

FRLVL

Bits 9-10: FIFO reception level.

Allowed values:
0: Empty: Rx FIFO Empty
1: Quarter: Rx 1/4 FIFO
2: Half: Rx 1/2 FIFO
3: Full: Rx FIFO full

FTLVL

Bits 11-12: FIFO transmission level.

Allowed values:
0: Empty: Tx FIFO Empty
1: Quarter: Tx 1/4 FIFO
2: Half: Tx 1/2 FIFO
3: Full: Tx FIFO full

data register

Offset: 0xc, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR
rw Toggle fields DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

DR8

Direct 8-bit access to data register

Offset: 0xc, size: 8, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR
rw Toggle fields DR

Bits 0-7: Data register.

Allowed values: 0x0-0xff

CRCPR

CRC polynomial register

Offset: 0x10, size: 16, reset: 0x00000007, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CRCPOLY
rw Toggle fields CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RxCRC
r Toggle fields RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TxCRC
r Toggle fields TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

I2SCFGR

I2S configuration register

Offset: 0x1c, size: 16, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, size: 16, reset: 0x00000010, access: read-write

3/3 fields covered.

Toggle fields I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 0x2-0xff

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

SPI2

0x40003800: Serial peripheral interface

53/53 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 16, reset: 0x00000000, access: read-write

14/14 fields covered.

Toggle fields CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

Bits 3-5: Baud rate control.

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

Allowed values:
0: EightBit: 8-bit CRC length
1: SixteenBit: 16-bit CRC length

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, size: 16, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

Allowed values:
0: NoPulse: No NSS pulse
1: PulseGenerated: NSS pulse generated

FRF

Bit 4: Frame format.

Allowed values:
0: Motorola: SPI Motorola mode
1: TI: SPI TI mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

Bits 8-11: Data size.

FRXTH

Bit 12: FIFO reception threshold.

LDMA_RX

Bit 13: Last DMA transfer for reception.

Allowed values:
0: Even: Number of data to transfer for receive is even
1: Odd: Number of data to transfer for receive is odd

LDMA_TX

Bit 14: Last DMA transfer for transmission.

Allowed values:
0: Even: Number of data to transfer for transmit is even
1: Odd: Number of data to transfer for transmit is odd

status register

Offset: 0x8, size: 16, reset: 0x00000002, access: Unspecified

11/11 fields covered.

Toggle fields RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CHSIDE

Bit 2: Channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

UDR

Bit 3: Underrun flag.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

Allowed values:
0: NoError: No frame format error
1: Error: A frame format error occurred

FRLVL

Bits 9-10: FIFO reception level.

Allowed values:
0: Empty: Rx FIFO Empty
1: Quarter: Rx 1/4 FIFO
2: Half: Rx 1/2 FIFO
3: Full: Rx FIFO full

FTLVL

Bits 11-12: FIFO transmission level.

Allowed values:
0: Empty: Tx FIFO Empty
1: Quarter: Tx 1/4 FIFO
2: Half: Tx 1/2 FIFO
3: Full: Tx FIFO full

data register

Offset: 0xc, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR
rw Toggle fields DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

DR8

Direct 8-bit access to data register

Offset: 0xc, size: 8, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DR
rw Toggle fields DR

Bits 0-7: Data register.

Allowed values: 0x0-0xff

CRCPR

CRC polynomial register

Offset: 0x10, size: 16, reset: 0x00000007, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CRCPOLY
rw Toggle fields CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RxCRC
r Toggle fields RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TxCRC
r Toggle fields TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

I2SCFGR

I2S configuration register

Offset: 0x1c, size: 16, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields CHLEN

Bit 0: Channel length (number of bits per audio channel).

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DATLEN

Bits 1-2: Data length to be transferred.

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPOL

Bit 3: Steady state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSYNC

Bit 7: PCM frame synchronization.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SCFG

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SE

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SMOD

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPR

I2S prescaler register

Offset: 0x20, size: 16, reset: 0x00000010, access: read-write

3/3 fields covered.

Toggle fields I2SDIV

Bits 0-7: I2S Linear prescaler.

Allowed values: 0x2-0xff

ODD

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is I2SDIV * 2
1: Odd: Real divider value is (I2SDIV * 2) + 1

MCKOE

Bit 9: Master clock output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

STK

0xe000e010: SysTick timer

0/9 fields covered.

Toggle register map Toggle registers CSR

SysTick control and status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

Toggle fields ENABLE

Bit 0: Counter enable.

TICKINT

Bit 1: SysTick exception request enable.

CLKSOURCE

Bit 2: Clock source selection.

COUNTFLAG

Bit 16: COUNTFLAG.

RVR

SysTick reload value register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 RELOAD
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RELOAD
rw Toggle fields RELOAD

Bits 0-23: RELOAD value.

CVR

SysTick current value register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CURRENT
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CURRENT
rw Toggle fields CURRENT

Bits 0-23: Current counter value.

CALIB

SysTick calibration value register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 NOREF
rw SKEW
rw TENMS
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TENMS
rw Toggle fields TENMS

Bits 0-23: Calibration value.

SKEW

Bit 30: SKEW flag: Indicates whether the TENMS value is exact.

NOREF

Bit 31: NOREF flag. Reads as zero.

SYSCFG

0x40010000: System configuration controller

45/45 fields covered.

Toggle register map Toggle registers CFGR1

configuration register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

25/25 fields covered.

Toggle fields MEM_MODE

Bits 0-1: Memory mapping selection bits.

Allowed values:
0: MainFlash: Main Flash memory mapped at 0x0000_0000
1: SystemFlash: System Flash memory mapped at 0x0000_0000
2: MainFlash2: Main Flash memory mapped at 0x0000_0000
3: SRAM: Embedded SRAM mapped at 0x0000_0000

PA11_PA12_RMP

Bit 4: PA11 and PA12 remapping bit for small packages (28 and 20 pins).

Allowed values:
0: NotRemapped: Pin pair PA9/PA10 mapped on the pins
1: Remapped: Pin pair PA11/PA12 mapped instead of PA9/PA10

IR_MOD

Bits 6-7: IR Modulation Envelope signal selection.

Allowed values:
0: TIM16: TIM16 selected
1: USART1: USART1 selected
2: USART4: USART4 selected

ADC_DMA_RMP

Bit 8: ADC DMA remapping bit.

Allowed values:
0: NotRemapped: ADC DMA request mapped on DMA channel 1
1: Remapped: ADC DMA request mapped on DMA channel 2

USART1_TX_DMA_RMP

Bit 9: USART1_TX DMA remapping bit.

Allowed values:
0: NotRemapped: USART1_TX DMA request mapped on DMA channel 2
1: Remapped: USART1_TX DMA request mapped on DMA channel 4

USART1_RX_DMA_RMP

Bit 10: USART1_RX DMA request remapping bit.

Allowed values:
0: NotRemapped: USART1_RX DMA request mapped on DMA channel 3
1: Remapped: USART1_RX DMA request mapped on DMA channel 5

TIM16_DMA_RMP

Bit 11: TIM16 DMA request remapping bit.

Allowed values:
0: NotRemapped: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 3
1: Remapped: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 4

TIM17_DMA_RMP

Bit 12: TIM17 DMA request remapping bit.

Allowed values:
0: NotRemapped: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 1
1: Remapped: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 2

TIM16_DMA_RMP2

Bit 13: TIM16 alternate DMA request remapping bit.

Allowed values:
0: NotAlternateRemapped: TIM16 DMA request mapped according to TIM16_DMA_RMP bit
1: AlternateRemapped: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 6

TIM17_DMA_RMP2

Bit 14: TIM17 alternate DMA request remapping bit.

Allowed values:
0: NotAlternateRemapped: TIM17 DMA request mapped according to TIM16_DMA_RMP bit
1: AlternateRemapped: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 7

I2C_PB6_FMP

Bit 16: Fast Mode Plus (FM plus) driving capability activation bits..

Allowed values:
0: Standard: PB6 pin operate in standard mode
1: FMP: I2C FM+ mode enabled on PB6 and the Speed control is bypassed

I2C_PB7_FMP

Bit 17: Fast Mode Plus (FM+) driving capability activation bits..

Allowed values:
0: Standard: PB7 pin operate in standard mode
1: FMP: I2C FM+ mode enabled on PB7 and the Speed control is bypassed

I2C_PB8_FMP

Bit 18: Fast Mode Plus (FM+) driving capability activation bits..

Allowed values:
0: Standard: PB8 pin operate in standard mode
1: FMP: I2C FM+ mode enabled on PB8 and the Speed control is bypassed

I2C_PB9_FMP

Bit 19: Fast Mode Plus (FM+) driving capability activation bits..

Allowed values:
0: Standard: PB9 pin operate in standard mode
1: FMP: I2C FM+ mode enabled on PB9 and the Speed control is bypassed

I2C1_FMP

Bit 20: FM+ driving capability activation for I2C1.

Allowed values:
0: Standard: FM+ mode is controlled by I2C_Pxx_FMP bits only
1: FMP: FM+ mode is enabled on all I2C1 pins selected through selection bits in GPIOx_AFR registers

I2C2_FMP

Bit 21: FM+ driving capability activation for I2C2.

Allowed values:
0: Standard: FM+ mode is controlled by I2C_Pxx_FMP bits only
1: FMP: FM+ mode is enabled on all I2C2 pins selected through selection bits in GPIOx_AFR registers

I2C_PA9_FMP

Bit 22: Fast Mode Plus (FM+) driving capability activation bits.

Allowed values:
0: Standard: PA9 pin operate in standard mode
1: FMP: I2C FM+ mode enabled on PA9 and the Speed control is bypassed

I2C_PA10_FMP

Bit 23: Fast Mode Plus (FM+) driving capability activation bits.

Allowed values:
0: Standard: PA10 pin operate in standard mode
1: FMP: I2C FM+ mode enabled on PA10 and the Speed control is bypassed

SPI2_DMA_RMP

Bit 24: SPI2 DMA request remapping bit.

Allowed values:
0: NotRemapped: SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively
1: Remapped: SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively

USART2_DMA_RMP

Bit 25: USART2 DMA request remapping bit.

Allowed values:
0: NotRemapped: USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively
1: Remapped: USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively

USART3_DMA_RMP

Bit 26: USART3 DMA request remapping bit.

Allowed values:
0: NotRemapped: USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively (or simply disabled on STM32F0x0)
1: Remapped: USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively

I2C1_DMA_RMP

Bit 27: I2C1 DMA request remapping bit.

Allowed values:
0: NotRemapped: I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively
1: Remapped: I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively

TIM1_DMA_RMP

Bit 28: TIM1 DMA request remapping bit.

Allowed values:
0: NotRemapped: TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively
1: Remapped: TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6

TIM2_DMA_RMP

Bit 29: TIM2 DMA request remapping bit.

Allowed values:
0: NotRemapped: TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively
1: Remapped: TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7

TIM3_DMA_RMP

Bit 30: TIM3 DMA request remapping bit.

Allowed values:
0: NotRemapped: TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4
1: Remapped: TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6

EXTICR1

external interrupt configuration register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields EXTI0

Bits 0-3: EXTI 0 configuration bits.

Allowed values:
0: PA: Select PAx as the source input for the EXTIx external interrupt
1: PB: Select PBx as the source input for the EXTIx external interrupt
2: PC: Select PCx as the source input for the EXTIx external interrupt
3: PD: Select PDx as the source input for the EXTIx external interrupt
4: PE: Select PEx as the source input for the EXTIx external interrupt
5: PF: Select PFx as the source input for the EXTIX external interrupt

EXTI1

Bits 4-7: EXTI 1 configuration bits.

EXTI2

Bits 8-11: EXTI 2 configuration bits.

EXTI3

Bits 12-15: EXTI 3 configuration bits.

EXTICR2

external interrupt configuration register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields EXTI4

Bits 0-3: EXTI 4 configuration bits.

EXTI5

Bits 4-7: EXTI 5 configuration bits.

EXTI6

Bits 8-11: EXTI 6 configuration bits.

EXTI7

Bits 12-15: EXTI 7 configuration bits.

EXTICR3

external interrupt configuration register 3

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields EXTI8

Bits 0-3: EXTI 8 configuration bits.

EXTI9

Bits 4-7: EXTI 9 configuration bits.

EXTI10

Bits 8-11: EXTI 10 configuration bits.

EXTI11

Bits 12-15: EXTI 11 configuration bits.

EXTICR4

external interrupt configuration register 4

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields EXTI12

Bits 0-3: EXTI 12 configuration bits.

EXTI13

Bits 4-7: EXTI 13 configuration bits.

EXTI14

Bits 8-11: EXTI 14 configuration bits.

EXTI15

Bits 12-15: EXTI 15 configuration bits.

CFGR2

configuration register 2

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields LOCKUP_LOCK

Bit 0: Cortex-M0 LOCKUP bit enable bit.

Allowed values:
0: Disconnected: Cortex-M0 LOCKUP output disconnected from TIM1/15/16/17 Break input
1: Connected: Cortex-M0 LOCKUP output connected to TIM1/15/16/17 Break input

SRAM_PARITY_LOCK

Bit 1: SRAM parity lock bit.

Allowed values:
0: Disconnected: SRAM parity error disconnected from TIM1/15/16/17 Break input
1: Connected: SRAM parity error connected to TIM1/15/16/17 Break input

PVD_LOCK

Bit 2: PVD lock enable bit.

Allowed values:
0: Disconnected: PVD interrupt disconnected from TIM1/15/16/17 Break input
1: Connected: PVD interrupt connected to TIM1/15/16/17 Break input

SRAM_PEF

Bit 8: SRAM parity flag.

Allowed values:
0: NoParityError: No SRAM parity error detected
1: ParityErrorDetected: SRAM parity error detected

TIM1

0x40012c00: Advanced-timers

126/127 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields CCPC

Bit 0: Capture/compare preloaded control.

Allowed values:
0: NotPreloaded: CCxE, CCxNE and OCxM bits are not preloaded
1: Preloaded: CCxE, CCxNE and OCxM bits are preloaded

CCUS

Bit 2: Capture/compare control update selection.

Allowed values:
0: Sw: When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit only
1: SwOrEdge: When capture/compare control bits are preloaded (CCPC=1), they are updated by setting the COMG bit or when an rising edge occurs on TRGI

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

OIS[1]

Bit 8: Output Idle state (OC1 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[1]N

Bit 9: Output Idle state (OC1N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[2]

Bit 10: Output Idle state (OC2 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[2]N

Bit 11: Output Idle state (OC2N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[3]

Bit 12: Output Idle state (OC3 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[3]N

Bit 13: Output Idle state (OC3N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[4]

Bit 14: Output Idle state (OC4 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

SMCR

slave mode control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

Toggle fields SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

15/15 fields covered.

Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[2]IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[3]IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[4]IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

Allowed values:
0: Disabled: COM interrupt disabled
1: Enabled: COM interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BIE

Bit 7: Break interrupt enable.

Allowed values:
0: Disabled: Break interrupt disabled
1: Enabled: Break interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[2]DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[3]DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[4]DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

Allowed values:
0: Disabled: COM DMA request disabled
1: Enabled: COM DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
0: NoMatch: No campture/compare has been detected
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[2]IF

Bit 2: Capture/compare 2 interrupt flag.

CC[3]IF

Bit 3: Capture/compare 3 interrupt flag.

CC[4]IF

Bit 4: Capture/compare 4 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

Allowed values:
0: NoCOM: No COM event occurred
1: COM: COM interrupt pending

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

BIF

Bit 7: Break interrupt flag.

Allowed values:
0: NoTrigger: No break event occurred
1: Trigger: An active level has been detected on the break input. An interrupt is generated if BIE=1 in the TIMx_DIER register

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[2]OF

Bit 10: Capture/Compare 2 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[3]OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[4]OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

8/8 fields covered.

Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[2]G

Bit 2: Capture/compare 2 generation.

CC[3]G

Bit 3: Capture/compare 3 generation.

CC[4]G

Bit 4: Capture/compare 4 generation.

COMG

Bit 5: Capture/Compare control update generation.

Allowed values:
1: Trigger: When CCPC bit is set, it allows CCxE, CCxNE and OCxM bits to be updated

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

Bit 7: Break generation.

Allowed values:
1: Trigger: A break event is generated. MOE bit is cleared and BIF flag is set. Related interrupt or DMA transfer can occur if enabled

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

Allowed values:
0: NoPrescaler: No prescaler, capture is done each time an edge is detected on the capture input
1: TwoEvents: Capture is done once every 2 events
2: FourEvents: Capture is done once every 4 events
3: EightEvents: Capture is done once every 8 events

IC[1]F

Bits 4-7: Input capture 1 filter.

CC2S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI2: CC2 channel is configured as input, IC2 is mapped on TI2
2: TI1: CC2 channel is configured as input, IC2 is mapped on TI1
3: TRC: CC2 channel is configured as input, IC2 is mapped on TRC

IC[2]PSC

Bits 10-11: Input capture 2 prescaler.

IC[2]F

Bits 12-15: Input capture 2 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

Allowed values:
0: Disabled: Preload register on CCRx disabled. New values written to CCRx are taken into account immediately
1: Enabled: Preload register on CCRx enabled. Preload value is loaded into active register on each update event

OC[1]M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy
4: ForceInactive: OCyREF is forced low
5: ForceActive: OCyREF is forced high
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active
7: PwmMode2: Inversely to PwmMode1

OC[1]CE

Bit 7: Output compare 1 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[2]FE

Bit 10: Output compare 2 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[2]PE

Bit 11: Output compare 2 preload enable.

OC[2]M

Bits 12-14: Output compare 2 mode.

OC[2]CE

Bit 15: Output compare 2 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC3S

Bits 0-1: Capture/compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC[3]PSC

Bits 2-3: Input capture 3 prescaler.

IC[3]F

Bits 4-7: Input capture 3 filter.

CC4S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI4: CC4 channel is configured as input, IC4 is mapped on TI4
2: TI3: CC4 channel is configured as input, IC4 is mapped on TI3
3: TRC: CC4 channel is configured as input, IC4 is mapped on TRC

IC[4]PSC

Bits 10-11: Input capture 4 prescaler.

IC[4]F

Bits 12-15: Input capture 4 filter.

CCMR2_Output

capture/compare mode register (output mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[3]FE

Bit 2: Output compare 3 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[3]PE

Bit 3: Output compare 3 preload enable.

OC[3]M

Bits 4-6: Output compare 3 mode.

OC[3]CE

Bit 7: Output compare 3 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[4]FE

Bit 10: Output compare 4 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[4]PE

Bit 11: Output compare 4 preload enable.

OC[4]M

Bits 12-14: Output compare 4 mode.

OC[4]CE

Bit 15: Output compare 4 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

14/14 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

Allowed values:
0: Disabled: Complementary output disabled
1: Enabled: Complementary output enabled

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CC[2]E

Bit 4: Capture/Compare 2 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[2]P

Bit 5: Capture/Compare 2 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[2]NE

Bit 6: Capture/Compare 2 complementary output enable.

Allowed values:
0: Disabled: Complementary output disabled
1: Enabled: Complementary output enabled

CC[2]NP

Bit 7: Capture/Compare 2 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CC[3]E

Bit 8: Capture/Compare 3 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[3]P

Bit 9: Capture/Compare 3 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[3]NE

Bit 10: Capture/Compare 3 complementary output enable.

Allowed values:
0: Disabled: Complementary output disabled
1: Enabled: Complementary output enabled

CC[3]NP

Bit 11: Capture/Compare 3 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CC[4]E

Bit 12: Capture/Compare 4 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[4]P

Bit 13: Capture/Compare 4 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 REP
rw Toggle fields REP

Bits 0-7: Repetition counter value.

Allowed values: 0x0-0xff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[2]

capture/compare register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[3]

capture/compare register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[4]

capture/compare register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields DTG

Bits 0-7: Dead-time generator setup.

Allowed values: 0x0-0xff

LOCK

Bits 8-9: Lock configuration.

Allowed values:
0: Off: No bit is write protected
1: Level1: Any bits except MOE, OSSR, OSSI and LOCK in TIMx_BDTR register, OISx and OISxN bits in TIMx_CR2 register can no longer be written
2: Level2: LOCK Level 1 + CC Polarity bits (CCxP/CCxNP bits in TIMx_CCER register, as long as the related channel is configured in output through the CCxS bits) as well as OSSR and OSSI bits can no longer be written
3: Level3: LOCK Level 2 + CC Control bits (OCxM and OCxPE bits in TIMx_CCMRx registers, as long as the related channel is configured in output through the CCxS bits) can no longer be written

OSSI

Bit 10: Off-state selection for Idle mode.

Allowed values:
0: HiZ: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are forced to idle level

OSSR

Bit 11: Off-state selection for Run mode.

Allowed values:
0: HiZ: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are enabled with their inactive level

BKE

Bit 12: Break enable.

Allowed values:
0: Disabled: Break function x disabled
1: Enabled: Break function x enabled

BKP

Bit 13: Break polarity.

Allowed values:
0: ActiveLow: Break input BRKx is active low
1: ActiveHigh: Break input BRKx is active high

AOE

Bit 14: Automatic output enable.

Allowed values:
0: Manual: MOE can be set only by software
1: Automatic: MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active)

MOE

Bit 15: Main output enable.

Allowed values:
0: DisabledIdle: OC/OCN are disabled or forced idle depending on OSSI
1: Enabled: OC/OCN are enabled if CCxE/CCxNE are set

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DBL
rw DBA
rw Toggle fields DBA

Bits 0-4: DMA base address.

Allowed values: 0x0-0x1f

DBL

Bits 8-12: DMA burst length.

Allowed values: 0x0-0x12

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAB
rw Toggle fields DMAB

Bits 0-15: DMA register for burst accesses.

TIM14

0x40002000: General-purpose-timers

25/27 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CC[1]IE
rw UIE
rw Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CC[1]G
w UG
w Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

CCMR1_Input

capture/compare mode register (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

2/3 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

option register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RMP
rw Toggle fields RMP

Bits 0-1: Timer input 1 remap.

TIM15

0x40014000: General-purpose-timers

63/78 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

6/7 fields covered.

Toggle fields CCPC

Bit 0: Capture/compare preloaded control.

Allowed values:
0: NotPreloaded: CCxE, CCxNE and OCxM bits are not preloaded
1: Preloaded: CCxE, CCxNE and OCxM bits are preloaded

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

OIS[1]

Bit 8: Output Idle state (OC1 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[1]N

Bit 9: Output Idle state (OC1N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[2]

Bit 10: Output Idle state (OC2 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

SMCR

slave mode control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MSM
rw TS
rw SMS
rw Toggle fields SMS

Bits 0-2: Slave mode selection.

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[2]IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

Allowed values:
0: Disabled: COM interrupt disabled
1: Enabled: COM interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BIE

Bit 7: Break interrupt enable.

Allowed values:
0: Disabled: Break interrupt disabled
1: Enabled: Break interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[2]DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

CC[2]IF

Bit 2: Capture/compare 2 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

Allowed values:
0: NoCOM: No COM event occurred
1: COM: COM interrupt pending

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

BIF

Bit 7: Break interrupt flag.

Allowed values:
0: NoTrigger: No break event occurred
1: Trigger: An active level has been detected on the break input. An interrupt is generated if BIE=1 in the TIMx_DIER register

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[2]OF

Bit 10: Capture/Compare 2 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

6/6 fields covered.

Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

CC[2]G

Bit 2: Capture/compare 2 generation.

COMG

Bit 5: Capture/Compare control update generation.

Allowed values:
1: Trigger: When CCPC bit is set, it allows CCxE, CCxNE and OCxM bits to be updated

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

Bit 7: Break generation.

Allowed values:
1: Trigger: A break event is generated. MOE bit is cleared and BIF flag is set. Related interrupt or DMA transfer can occur if enabled

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CC2S

Bits 8-9: Capture/Compare 2 selection.

IC[2]PSC

Bits 10-11: Input capture 2 prescaler.

IC[2]F

Bits 12-15: Input capture 2 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[2]FE

Bit 10: Output compare 2 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[2]PE

Bit 11: Output compare 2 preload enable.

OC[2]M

Bits 12-14: Output compare 2 mode.

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

Allowed values:
0: Disabled: Complementary output disabled
1: Enabled: Complementary output enabled

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CC[2]E

Bit 4: Capture/Compare 2 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[2]P

Bit 5: Capture/Compare 2 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[2]NP

Bit 7: Capture/Compare 2 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 REP
rw Toggle fields REP

Bits 0-7: Repetition counter value.

Allowed values: 0x0-0xff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[2]

capture/compare register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/8 fields covered.

Toggle fields DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DBL
rw DBA
rw Toggle fields DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAB
rw Toggle fields DMAB

Bits 0-15: DMA register for burst accesses.

TIM16

0x40014400: General-purpose-timers

42/57 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields CCPC

Bit 0: Capture/compare preloaded control.

Allowed values:
0: NotPreloaded: CCxE, CCxNE and OCxM bits are not preloaded
1: Preloaded: CCxE, CCxNE and OCxM bits are preloaded

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

OIS[1]

Bit 8: Output Idle state (OC1 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[1]N

Bit 9: Output Idle state (OC1N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

6/8 fields covered.

Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

Allowed values:
0: Disabled: COM interrupt disabled
1: Enabled: COM interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

BIE

Bit 7: Break interrupt enable.

Allowed values:
0: Disabled: Break interrupt disabled
1: Enabled: Break interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/6 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

Allowed values:
0: NoCOM: No COM event occurred
1: COM: COM interrupt pending

TIF

Bit 6: Trigger interrupt flag.

BIF

Bit 7: Break interrupt flag.

Allowed values:
0: NoTrigger: No break event occurred
1: Trigger: An active level has been detected on the break input. An interrupt is generated if BIE=1 in the TIMx_DIER register

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

4/5 fields covered.

Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

COMG

Bit 5: Capture/Compare control update generation.

Allowed values:
1: Trigger: When CCPC bit is set, it allows CCxE, CCxNE and OCxM bits to be updated

Bit 6: Trigger generation.

Bit 7: Break generation.

Allowed values:
1: Trigger: A break event is generated. MOE bit is cleared and BIF flag is set. Related interrupt or DMA transfer can occur if enabled

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

Allowed values:
0: Disabled: Complementary output disabled
1: Enabled: Complementary output enabled

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 REP
rw Toggle fields REP

Bits 0-7: Repetition counter value.

Allowed values: 0x0-0xff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/8 fields covered.

Toggle fields DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DBL
rw DBA
rw Toggle fields DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAB
rw Toggle fields DMAB

Bits 0-15: DMA register for burst accesses.

TIM17

0x40014800: General-purpose-timers

42/57 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields CCPC

Bit 0: Capture/compare preloaded control.

Allowed values:
0: NotPreloaded: CCxE, CCxNE and OCxM bits are not preloaded
1: Preloaded: CCxE, CCxNE and OCxM bits are preloaded

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

OIS[1]

Bit 8: Output Idle state (OC1 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[1]N

Bit 9: Output Idle state (OC1N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

6/8 fields covered.

Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

Allowed values:
0: Disabled: COM interrupt disabled
1: Enabled: COM interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

BIE

Bit 7: Break interrupt enable.

Allowed values:
0: Disabled: Break interrupt disabled
1: Enabled: Break interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

TDE

Bit 14: Trigger DMA request enable.

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/6 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

Allowed values:
0: NoCOM: No COM event occurred
1: COM: COM interrupt pending

TIF

Bit 6: Trigger interrupt flag.

BIF

Bit 7: Break interrupt flag.

Allowed values:
0: NoTrigger: No break event occurred
1: Trigger: An active level has been detected on the break input. An interrupt is generated if BIE=1 in the TIMx_DIER register

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

4/5 fields covered.

Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

COMG

Bit 5: Capture/Compare control update generation.

Allowed values:
1: Trigger: When CCPC bit is set, it allows CCxE, CCxNE and OCxM bits to be updated

Bit 6: Trigger generation.

Bit 7: Break generation.

Allowed values:
1: Trigger: A break event is generated. MOE bit is cleared and BIF flag is set. Related interrupt or DMA transfer can occur if enabled

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

Allowed values:
0: Disabled: Complementary output disabled
1: Enabled: Complementary output enabled

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

Allowed values:
0: ActiveHigh: OCxN active high
1: ActiveLow: OCxN active low

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 REP
rw Toggle fields REP

Bits 0-7: Repetition counter value.

Allowed values: 0x0-0xff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/8 fields covered.

Toggle fields DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DBL
rw DBA
rw Toggle fields DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAB
rw Toggle fields DMAB

Bits 0-15: DMA register for burst accesses.

TIM2

0x40000000: General-purpose-timers

95/101 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TI1S
rw MMS
rw CCDS
rw Toggle fields CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

Toggle fields SMS

Bits 0-2: Slave mode selection.

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

ETF

Bits 8-11: External trigger filter.

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

12/13 fields covered.

Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[2]IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[3]IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[4]IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[2]DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[3]DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[4]DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

CC[2]IF

Bit 2: Capture/compare 2 interrupt flag.

CC[3]IF

Bit 3: Capture/compare 3 interrupt flag.

CC[4]IF

Bit 4: Capture/compare 4 interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[2]OF

Bit 10: Capture/Compare 2 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[3]OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[4]OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

6/6 fields covered.

Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

CC[2]G

Bit 2: Capture/compare 2 generation.

CC[3]G

Bit 3: Capture/compare 3 generation.

CC[4]G

Bit 4: Capture/compare 4 generation.

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CC2S

Bits 8-9: Capture/compare 2 selection.

IC[2]PSC

Bits 10-11: Input capture 2 prescaler.

IC[2]F

Bits 12-15: Input capture 2 filter.

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

OC[1]CE

Bit 7: Output compare 1 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[2]FE

Bit 10: Output compare 2 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[2]PE

Bit 11: Output compare 2 preload enable.

OC[2]M

Bits 12-14: Output compare 2 mode.

OC[2]CE

Bit 15: Output compare 2 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC3S

Bits 0-1: Capture/Compare 3 selection.

IC[3]PSC

Bits 2-3: Input capture 3 prescaler.

IC[3]F

Bits 4-7: Input capture 3 filter.

CC4S

Bits 8-9: Capture/Compare 4 selection.

IC[4]PSC

Bits 10-11: Input capture 4 prescaler.

IC[4]F

Bits 12-15: Input capture 4 filter.

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[3]FE

Bit 2: Output compare 3 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[3]PE

Bit 3: Output compare 3 preload enable.

OC[3]M

Bits 4-6: Output compare 3 mode.

OC[3]CE

Bit 7: Output compare 3 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[4]FE

Bit 10: Output compare 4 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[4]PE

Bit 11: Output compare 4 preload enable.

OC[4]M

Bits 12-14: Output compare 4 mode.

OC[4]CE

Bit 15: Output compare 4 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/12 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CC[2]E

Bit 4: Capture/Compare 2 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[2]P

Bit 5: Capture/Compare 2 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[2]NP

Bit 7: Capture/Compare 2 output Polarity.

CC[3]E

Bit 8: Capture/Compare 3 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[3]P

Bit 9: Capture/Compare 3 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[3]NP

Bit 11: Capture/Compare 3 output Polarity.

CC[4]E

Bit 12: Capture/Compare 4 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[4]P

Bit 13: Capture/Compare 4 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[4]NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CNT
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-31: Counter value.

Allowed values: 0x0-0xffffffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 ARR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-31: Auto-reload value.

Allowed values: 0x0-0xffffffff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CCR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

CCR[2]

capture/compare register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CCR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

CCR[3]

capture/compare register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CCR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

CCR[4]

capture/compare register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CCR
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DBL
rw DBA
rw Toggle fields DBA

Bits 0-4: DMA base address.

Allowed values: 0x0-0x1f

DBL

Bits 8-12: DMA burst length.

Allowed values: 0x0-0x12

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAR
rw Toggle fields DMAR

Bits 0-15: DMA register for burst accesses.

TIM3

0x40000400: General-purpose-timers

95/101 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TI1S
rw MMS
rw CCDS
rw Toggle fields CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

Toggle fields SMS

Bits 0-2: Slave mode selection.

Bits 4-6: Trigger selection.

MSM

Bit 7: Master/Slave mode.

ETF

Bits 8-11: External trigger filter.

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

12/13 fields covered.

Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[2]IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[3]IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[4]IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[2]DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[3]DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[4]DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

CC[2]IF

Bit 2: Capture/compare 2 interrupt flag.

CC[3]IF

Bit 3: Capture/compare 3 interrupt flag.

CC[4]IF

Bit 4: Capture/compare 4 interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[2]OF

Bit 10: Capture/Compare 2 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[3]OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[4]OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
0: NoOvercapture: No overcapture has been detected
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

6/6 fields covered.

Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

CC[2]G

Bit 2: Capture/compare 2 generation.

CC[3]G

Bit 3: Capture/compare 3 generation.

CC[4]G

Bit 4: Capture/compare 4 generation.

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC1S

Bits 0-1: Capture/Compare 1 selection.

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CC2S

Bits 8-9: Capture/compare 2 selection.

IC[2]PSC

Bits 10-11: Input capture 2 prescaler.

IC[2]F

Bits 12-15: Input capture 2 filter.

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

OC[1]CE

Bit 7: Output compare 1 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[2]FE

Bit 10: Output compare 2 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[2]PE

Bit 11: Output compare 2 preload enable.

OC[2]M

Bits 12-14: Output compare 2 mode.

OC[2]CE

Bit 15: Output compare 2 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

Toggle fields CC3S

Bits 0-1: Capture/Compare 3 selection.

IC[3]PSC

Bits 2-3: Input capture 3 prescaler.

IC[3]F

Bits 4-7: Input capture 3 filter.

CC4S

Bits 8-9: Capture/Compare 4 selection.

IC[4]PSC

Bits 10-11: Input capture 4 prescaler.

IC[4]F

Bits 12-15: Input capture 4 filter.

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

Toggle fields CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[3]FE

Bit 2: Output compare 3 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[3]PE

Bit 3: Output compare 3 preload enable.

OC[3]M

Bits 4-6: Output compare 3 mode.

OC[3]CE

Bit 7: Output compare 3 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
0: Output: CCx channel is configured as output

OC[4]FE

Bit 10: Output compare 4 fast enable.

Allowed values:
0: Disabled: Fast output disabled
1: Enabled: Fast output enabled

OC[4]PE

Bit 11: Output compare 4 preload enable.

OC[4]M

Bits 12-14: Output compare 4 mode.

OC[4]CE

Bit 15: Output compare 4 clear enable.

Allowed values:
0: Disabled: OCxRef is not affected by the ETRF signal
1: Enabled: OCxRef is cleared as soon as a High level is detected on ETRF signal

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/12 fields covered.

Toggle fields CC[1]E

Bit 0: Capture/Compare 1 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CC[2]E

Bit 4: Capture/Compare 2 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[2]P

Bit 5: Capture/Compare 2 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[2]NP

Bit 7: Capture/Compare 2 output Polarity.

CC[3]E

Bit 8: Capture/Compare 3 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[3]P

Bit 9: Capture/Compare 3 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[3]NP

Bit 11: Capture/Compare 3 output Polarity.

CC[4]E

Bit 12: Capture/Compare 4 output enable.

Allowed values:
0: Disabled: Capture disabled
1: Enabled: Capture enabled

CC[4]P

Bit 13: Capture/Compare 4 output Polarity.

Allowed values:
0: RisingEdge: Noninverted/rising edge
1: FallingEdge: Inverted/falling edge

CC[4]NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: Counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[2]

capture/compare register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[3]

capture/compare register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[4]

capture/compare register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CCR
rw Toggle fields CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DBL
rw DBA
rw Toggle fields DBA

Bits 0-4: DMA base address.

Allowed values: 0x0-0x1f

DBL

Bits 8-12: DMA burst length.

Allowed values: 0x0-0x12

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DMAR
rw Toggle fields DMAR

Bits 0-15: DMA register for burst accesses.

TIM6

0x40001000: Basic-timers

13/13 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MMS
rw Toggle fields MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: Use UG bit from TIMx_EGR register
1: Enable: Use CNT bit from TIMx_CEN register
2: Update: Use the update event

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 UDE
rw UIE
rw Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 UIF
r/w0c Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 UG
w Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: Low counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Low Auto-reload value.

Allowed values: 0x0-0xffff

TIM7

0x40001400: Basic-timers

13/13 fields covered.

Toggle register map Toggle registers CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MMS
rw Toggle fields MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: Use UG bit from TIMx_EGR register
1: Enable: Use CNT bit from TIMx_CEN register
2: Update: Use the update event

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 UDE
rw UIE
rw Toggle fields UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 UIF
r/w0c Toggle fields UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 UG
w Toggle fields UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
rw Toggle fields CNT

Bits 0-15: Low counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 PSC
rw Toggle fields PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 ARR
rw Toggle fields ARR

Bits 0-15: Low Auto-reload value.

Allowed values: 0x0-0xffff

TSC

0x40024000: Touch sensing controller

126/136 fields covered.

Toggle register map Toggle registers CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/12 fields covered.

Toggle fields TSCE

Bit 0: Touch sensing controller enable.

Allowed values:
0: Disabled: Touch sensing controller disabled
1: Enabled: Touch sensing controller enabled

START

Bit 1: Start a new acquisition.

Allowed values:
0: NoStarted: Acquisition not started
1: Started: Start a new acquisition

Bit 2: Acquisition mode.

Allowed values:
0: Normal: Normal acquisition mode (acquisition starts as soon as START bit is set)
1: Synchronized: Synchronized acquisition mode (acquisition starts if START bit is set and when the selected signal is detected on the SYNC input pin)

SYNCPOL

Bit 3: Synchronization pin polarity.

Allowed values:
0: FallingEdge: Falling edge only
1: RisingEdge: Rising edge and high level

IODEF

Bit 4: I/O Default mode.

Allowed values:
0: PushPull: I/Os are forced to output push-pull low
1: Floating: I/Os are in input floating

MCV

Bits 5-7: Max count value.

PGPSC

Bits 12-14: pulse generator prescaler.

SSPSC

Bit 15: Spread spectrum prescaler.

SSE

Bit 16: Spread spectrum enable.

Allowed values:
0: Disabled: Spread spectrum disabled
1: Enabled: Spread spectrum enabled

SSD

Bits 17-23: Spread spectrum deviation.

CTPL

Bits 24-27: Charge transfer pulse low.

CTPH

Bits 28-31: Charge transfer pulse high.

IER

interrupt enable register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MCEIE
rw EOAIE
rw Toggle fields EOAIE

Bit 0: End of acquisition interrupt enable.

Allowed values:
0: Disabled: End of acquisition interrupt disabled
1: Enabled: End of acquisition interrupt enabled

MCEIE

Bit 1: Max count error interrupt enable.

Allowed values:
0: Disabled: Max count error interrupt disabled
1: Enabled: Max count error interrupt enabled

ICR

interrupt clear register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MCEIC
rw EOAIC
rw Toggle fields EOAIC

Bit 0: End of acquisition interrupt clear.

MCEIC

Bit 1: Max count error interrupt clear.

ISR

interrupt status register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MCEF
rw EOAF
rw Toggle fields EOAF

Bit 0: End of acquisition flag.

MCEF

Bit 1: Max count error flag.

IOHCR

I/O hysteresis control register

Offset: 0x10, size: 32, reset: 0xFFFFFFFF, access: read-write

24/24 fields covered.

Toggle fields G[1]_IO1

Bit 0: G1_IO1 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[1]_IO2

Bit 1: G1_IO2 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[1]_IO3

Bit 2: G1_IO3 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[1]_IO4

Bit 3: G1_IO4 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[2]_IO1

Bit 4: G2_IO1 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[2]_IO2

Bit 5: G2_IO2 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[2]_IO3

Bit 6: G2_IO3 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[2]_IO4

Bit 7: G2_IO4 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[3]_IO1

Bit 8: G3_IO1 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[3]_IO2

Bit 9: G3_IO2 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[3]_IO3

Bit 10: G3_IO3 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[3]_IO4

Bit 11: G3_IO4 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[4]_IO1

Bit 12: G4_IO1 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[4]_IO2

Bit 13: G4_IO2 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[4]_IO3

Bit 14: G4_IO3 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[4]_IO4

Bit 15: G4_IO4 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[5]_IO1

Bit 16: G5_IO1 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[5]_IO2

Bit 17: G5_IO2 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[5]_IO3

Bit 18: G5_IO3 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[5]_IO4

Bit 19: G5_IO4 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[6]_IO1

Bit 20: G6_IO1 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[6]_IO2

Bit 21: G6_IO2 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[6]_IO3

Bit 22: G6_IO3 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

G[6]_IO4

Bit 23: G6_IO4 Schmitt trigger hysteresis mode.

Allowed values:
0: Disabled: Gx_IOy Schmitt trigger hysteresis disabled
1: Enabled: Gx_IOy Schmitt trigger hysteresis enabled

IOASCR

I/O analog switch control register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

24/24 fields covered.

Toggle fields G[1]_IO1

Bit 0: G1_IO1 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[1]_IO2

Bit 1: G1_IO2 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[1]_IO3

Bit 2: G1_IO3 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[1]_IO4

Bit 3: G1_IO4 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[2]_IO1

Bit 4: G2_IO1 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[2]_IO2

Bit 5: G2_IO2 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[2]_IO3

Bit 6: G2_IO3 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[2]_IO4

Bit 7: G2_IO4 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[3]_IO1

Bit 8: G3_IO1 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[3]_IO2

Bit 9: G3_IO2 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[3]_IO3

Bit 10: G3_IO3 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[3]_IO4

Bit 11: G3_IO4 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[4]_IO1

Bit 12: G4_IO1 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[4]_IO2

Bit 13: G4_IO2 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[4]_IO3

Bit 14: G4_IO3 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[4]_IO4

Bit 15: G4_IO4 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[5]_IO1

Bit 16: G5_IO1 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[5]_IO2

Bit 17: G5_IO2 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[5]_IO3

Bit 18: G5_IO3 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[5]_IO4

Bit 19: G5_IO4 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[6]_IO1

Bit 20: G6_IO1 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[6]_IO2

Bit 21: G6_IO2 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[6]_IO3

Bit 22: G6_IO3 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

G[6]_IO4

Bit 23: G6_IO4 analog switch enable.

Allowed values:
0: Disabled: Gx_IOy analog switch disabled (opened)
1: Enabled: Gx_IOy analog switch enabled (closed)

IOSCR

I/O sampling control register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

24/24 fields covered.

Toggle fields G[1]_IO1

Bit 0: G1_IO1 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[1]_IO2

Bit 1: G1_IO2 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[1]_IO3

Bit 2: G1_IO3 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[1]_IO4

Bit 3: G1_IO4 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[2]_IO1

Bit 4: G2_IO1 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[2]_IO2

Bit 5: G2_IO2 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[2]_IO3

Bit 6: G2_IO3 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[2]_IO4

Bit 7: G2_IO4 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[3]_IO1

Bit 8: G3_IO1 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[3]_IO2

Bit 9: G3_IO2 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[3]_IO3

Bit 10: G3_IO3 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[3]_IO4

Bit 11: G3_IO4 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[4]_IO1

Bit 12: G4_IO1 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[4]_IO2

Bit 13: G4_IO2 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[4]_IO3

Bit 14: G4_IO3 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[4]_IO4

Bit 15: G4_IO4 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[5]_IO1

Bit 16: G5_IO1 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[5]_IO2

Bit 17: G5_IO2 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[5]_IO3

Bit 18: G5_IO3 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[5]_IO4

Bit 19: G5_IO4 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[6]_IO1

Bit 20: G6_IO1 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[6]_IO2

Bit 21: G6_IO2 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[6]_IO3

Bit 22: G6_IO3 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

G[6]_IO4

Bit 23: G6_IO4 sampling mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as sampling capacitor

IOCCR

I/O channel control register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

24/24 fields covered.

Toggle fields G[1]_IO1

Bit 0: G1_IO1 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[1]_IO2

Bit 1: G1_IO2 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[1]_IO3

Bit 2: G1_IO3 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[1]_IO4

Bit 3: G1_IO4 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[2]_IO1

Bit 4: G2_IO1 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[2]_IO2

Bit 5: G2_IO2 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[2]_IO3

Bit 6: G2_IO3 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[2]_IO4

Bit 7: G2_IO4 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[3]_IO1

Bit 8: G3_IO1 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[3]_IO2

Bit 9: G3_IO2 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[3]_IO3

Bit 10: G3_IO3 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[3]_IO4

Bit 11: G3_IO4 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[4]_IO1

Bit 12: G4_IO1 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[4]_IO2

Bit 13: G4_IO2 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[4]_IO3

Bit 14: G4_IO3 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[4]_IO4

Bit 15: G4_IO4 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[5]_IO1

Bit 16: G5_IO1 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[5]_IO2

Bit 17: G5_IO2 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[5]_IO3

Bit 18: G5_IO3 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[5]_IO4

Bit 19: G5_IO4 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[6]_IO1

Bit 20: G6_IO1 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[6]_IO2

Bit 21: G6_IO2 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[6]_IO3

Bit 22: G6_IO3 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

G[6]_IO4

Bit 23: G6_IO4 channel mode.

Allowed values:
0: Disabled: Gx_IOy unused
1: Enabled: Gx_IOy used as channel

IOGCSR

I/O group control status register

Offset: 0x30, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

Toggle fields G[1]E

Bit 0: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[2]E

Bit 1: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[3]E

Bit 2: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[4]E

Bit 3: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[5]E

Bit 4: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[6]E

Bit 5: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[7]E

Bit 6: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[8]E

Bit 7: Analog I/O group x enable.

Allowed values:
0: Disabled: Acquisition on analog I/O group x disabled
1: Enabled: Acquisition on analog I/O group x enabled

G[1]S

Bit 16: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[2]S

Bit 17: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[3]S

Bit 18: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[4]S

Bit 19: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[5]S

Bit 20: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[6]S

Bit 21: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[7]S

Bit 22: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

G[8]S

Bit 23: Analog I/O group x status.

Allowed values:
0: Ongoing: Acquisition on analog I/O group x is ongoing or not started
1: Complete: Acquisition on analog I/O group x is complete

IOG[1]CR

I/O group x counter register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
r Toggle fields CNT

Bits 0-13: Counter value.

IOG[2]CR

I/O group x counter register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
r Toggle fields CNT

Bits 0-13: Counter value.

IOG[3]CR

I/O group x counter register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
r Toggle fields CNT

Bits 0-13: Counter value.

IOG[4]CR

I/O group x counter register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
r Toggle fields CNT

Bits 0-13: Counter value.

IOG[5]CR

I/O group x counter register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
r Toggle fields CNT

Bits 0-13: Counter value.

IOG[6]CR

I/O group x counter register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CNT
r Toggle fields CNT

Bits 0-13: Counter value.

USART1

0x40013800: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement
2: Frame7F: 0x7F frame detection
3: Frame55: 0x55 frame detection

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART2

0x40004400: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART3

0x40004800: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART4

0x40004c00: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART5

0x40005000: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART6

0x40011400: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART7

0x40011800: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART8

0x40011c00: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map Toggle registers CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

Toggle fields UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

Toggle fields ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

Toggle fields EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BRR
rw Toggle fields BRR

Bits 0-15: mantissa of USARTDIV.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 GT
rw PSC
rw Toggle fields PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 BLEN
rw RTO
rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RTO
rw Toggle fields RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

Toggle fields ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

Toggle fields PE

Bit 0: Parity error.

Allowed values:
0: NoError: No parity error
1: Error: Parity error

Bit 1: Framing error.

Allowed values:
0: NoError: No Framing error is detected
1: Error: Framing error or break character is detected

Bit 2: Noise detected flag.

Allowed values:
0: NoNoise: No noise is detected
1: Noise: Noise is detected

ORE

Bit 3: Overrun error.

Allowed values:
0: NoOverrun: No Overrun error
1: Overrun: Overrun error is detected

IDLE

Bit 4: Idle line detected.

Allowed values:
0: NoIdle: No Idle Line is detected
1: Idle: Idle Line is detected

RXNE

Bit 5: Read data register not empty.

Allowed values:
0: NoData: Data is not received
1: DataReady: Received data is ready to be read

Bit 6: Transmission complete.

Allowed values:
0: TxNotComplete: Transmission is not complete
1: TxComplete: Transmission is complete

TXE

Bit 7: Transmit data register empty.

Allowed values:
0: Full: Transmit FIFO is full
1: NotFull: Transmit FIFO is not full

LBDF

Bit 8: LIN break detection flag.

Allowed values:
0: NotDetected: LIN break not detected
1: Detected: LIN break detected

CTSIF

Bit 9: CTS interrupt flag.

Allowed values:
0: NotChanged: No change occurred on the CTS status line
1: Changed: A change occurred on the CTS status line

CTS

Bit 10: CTS flag.

Allowed values:
0: Set: CTS line set
1: Reset: CTS line reset

RTOF

Bit 11: Receiver timeout.

Allowed values:
0: NotReached: Timeout value not reached
1: Reached: Timeout value reached without any data reception

EOBF

Bit 12: End of block flag.

Allowed values:
0: NotReached: End of Block not reached
1: Reached: End of Block (number of characters) reached

ABRE

Bit 14: Auto baud rate error.

ABRF

Bit 15: Auto baud rate flag.

BUSY

Bit 16: Busy flag.

Allowed values:
0: Idle: USART is idle (no reception)
1: Busy: Reception on going

CMF

Bit 17: character match flag.

Allowed values:
0: NoMatch: No Character match detected
1: Match: Character match detected

SBKF

Bit 18: Send break flag.

Allowed values:
0: NoBreak: No break character transmitted
1: Break: Break character transmitted

RWU

Bit 19: Receiver wakeup from Mute mode.

Allowed values:
0: Active: Receiver in Active mode
1: Mute: Receiver in Mute mode

WUF

Bit 20: Wakeup from Stop mode flag.

TEACK

Bit 21: Transmit enable acknowledge flag.

REACK

Bit 22: Receive enable acknowledge flag.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

Toggle fields PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of timeout clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RDR
r Toggle fields RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TDR
rw Toggle fields TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USB

0x40005c00: Universal serial bus full-speed device interface

79/127 fields covered.

Toggle register map Toggle registers EP[0]R

endpoint 0 register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

Allowed values:
0: Disabled: all transmission requests addressed to this endpoint are ignored
1: Stall: the endpoint is stalled and all transmission requests result in a STALL handshake
2: Nak: the endpoint is naked and all transmission requests result in a NAK handshake
3: Valid: this endpoint is enabled for transmission

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

Allowed values:
0: Disabled: all reception requests addressed to this endpoint are ignored
1: Stall: the endpoint is stalled and all reception requests result in a STALL handshake
2: Nak: the endpoint is naked and all reception requests result in a NAK handshake
3: Valid: this endpoint is enabled for reception

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[1]R

endpoint 1 register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[2]R

endpoint 2 register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[3]R

endpoint 3 register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[4]R

endpoint 4 register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[5]R

endpoint 5 register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[6]R

endpoint 6 register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP[7]R

endpoint 7 register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

Toggle fields EA

Bits 0-3: Endpoint address.

Allowed values: 0x0-0xf

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

Allowed values:
0: Bulk: Bulk endpoint
1: Control: Control endpoint
2: Iso: Iso endpoint
3: Interrupt: Interrupt endpoint

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

CNTR

control register

Offset: 0x40, size: 32, reset: 0x00000003, access: read-write

15/15 fields covered.

Toggle fields FRES

Bit 0: Force USB Reset.

Allowed values:
0: NoReset: Clear USB reset
1: Reset: Force a reset of the USB peripheral, exactly like a RESET signaling on the USB

PDWN

Bit 1: Power down.

Allowed values:
0: Disabled: No power down
1: Enabled: Enter power down mode

LPMODE

Bit 2: Low-power mode.

Allowed values:
0: Disabled: No low-power mode
1: Enabled: Enter low-power mode

FSUSP

Bit 3: Force suspend.

Allowed values:
0: NoEffect: No effect
1: Suspend: Enter suspend mode. Clocks and static power dissipation in the analog transceiver are left unaffected

RESUME

Bit 4: Resume request.

Allowed values:
1: Requested: Resume requested

L1RESUME

Bit 5: LPM L1 Resume request.

Allowed values:
1: Requested: LPM L1 request requested

L1REQM

Bit 7: LPM L1 state request interrupt mask.

Allowed values:
0: Disabled: L1REQ Interrupt disabled
1: Enabled: L1REQ Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

ESOFM

Bit 8: Expected start of frame interrupt mask.

Allowed values:
0: Disabled: ESOF Interrupt disabled
1: Enabled: ESOF Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

SOFM

Bit 9: Start of frame interrupt mask.

Allowed values:
0: Disabled: SOF Interrupt disabled
1: Enabled: SOF Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

RESETM

Bit 10: USB reset interrupt mask.

Allowed values:
0: Disabled: RESET Interrupt disabled
1: Enabled: RESET Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

SUSPM

Bit 11: Suspend mode interrupt mask.

Allowed values:
0: Disabled: Suspend Mode Request SUSP Interrupt disabled
1: Enabled: SUSP Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

WKUPM

Bit 12: Wakeup interrupt mask.

Allowed values:
0: Disabled: WKUP Interrupt disabled
1: Enabled: WKUP Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

ERRM

Bit 13: Error interrupt mask.

Allowed values:
0: Disabled: ERR Interrupt disabled
1: Enabled: ERR Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

PMAOVRM

Bit 14: Packet memory area over / underrun interrupt mask.

Allowed values:
0: Disabled: PMAOVR Interrupt disabled
1: Enabled: PMAOVR Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

CTRM

Bit 15: Correct transfer interrupt mask.

Allowed values:
0: Disabled: Correct Transfer (CTR) Interrupt disabled
1: Enabled: CTR Interrupt enabled, an interrupt request is generated when the corresponding bit in the USB_ISTR register is set

ISTR

interrupt status register

Offset: 0x44, size: 32, reset: 0x00000000, access: Unspecified

11/11 fields covered.

Toggle fields EP_ID

Bits 0-3: Endpoint Identifier.

Allowed values: 0x0-0xf

DIR

Bit 4: Direction of transaction.

Allowed values:
0: To: Data transmitted by the USB peripheral to the host PC
1: From: Data received by the USB peripheral from the host PC

L1REQ

Bit 7: LPM L1 state request.

Allowed values:
0: NotReceived: LPM command to enter the L1 state is not received
1: Received: LPM command to enter the L1 state is successfully received and acknowledged

ESOF

Bit 8: Expected start frame.

Allowed values:
0: NotExpectedStartOfFrame: NotExpectedStartOfFrame
1: ExpectedStartOfFrame: An SOF packet is expected but not received

SOF

Bit 9: start of frame.

Allowed values:
0: NotStartOfFrame: NotStartOfFrame
1: StartOfFrame: Beginning of a new USB frame and it is set when a SOF packet arrives through the USB bus

RESET

Bit 10: reset request.

Allowed values:
0: NotReset: NotReset
1: Reset: Peripheral detects an active USB RESET signal at its inputs

SUSP

Bit 11: Suspend mode request.

Allowed values:
0: NotSuspend: NotSuspend
1: Suspend: No traffic has been received for 3 ms, indicating a suspend mode request from the USB bus

WKUP

Bit 12: Wakeup.

Allowed values:
0: NotWakeup: NotWakeup
1: Wakeup: Activity is detected that wakes up the USB peripheral

ERR

Bit 13: Error.

Allowed values:
0: NotOverrun: Errors are not occurred
1: Error: One of No ANSwer, Cyclic Redundancy Check, Bit Stuffing or Framing format Violation error occurred

PMAOVR

Bit 14: Packet memory area over / underrun.

Allowed values:
0: NotOverrun: Overrun is not occurred
1: Overrun: Microcontroller has not been able to respond in time to an USB memory request

CTR

Bit 15: Correct transfer.

Allowed values:
1: Completed: Endpoint has successfully completed a transaction

FNR

frame number register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-only

5/5 fields covered.

Toggle fields FN

Bits 0-10: Frame number.

Allowed values: 0x0-0x7ff

LSOF

Bits 11-12: Lost SOF.

Allowed values: 0x0-0x3

LCK

Bit 13: Locked.

Allowed values:
1: Locked: the frame timer remains in this state until an USB reset or USB suspend event occurs

RXDM

Bit 14: Receive data - line status.

Allowed values:
1: Received: received data minus upstream port data line

RXDP

Bit 15: Receive data + line status.

Allowed values:
1: Received: received data plus upstream port data line

DADDR

device address

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EF
rw ADD
rw Toggle fields ADD

Bits 0-6: Device address.

Allowed values: 0x0-0x7f

Bit 7: Enable function.

Allowed values:
0: Disabled: USB device disabled
1: Enabled: USB device enabled

BTABLE

Buffer table address

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 BTABLE
rw Toggle fields BTABLE

Bits 3-15: Buffer table.

Allowed values: 0x0-0x1fff

LPMCSR

LPM control and status register

Offset: 0x54, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

Toggle fields LPMEN

Bit 0: LPM support enable.

Allowed values:
0: Disabled: No LPM transactions are handled
1: Enabled: Enable the LPM support within the USB device

LPMACK

Bit 1: LPM Token acknowledge enable.

Allowed values:
0: Nyet: The valid LPM Token will be NYET
1: Ack: The valid LPM Token will be ACK

REMWAKE

Bit 3: bRemoteWake value.

BESL

Bits 4-7: BESL value.

Allowed values: 0x0-0xf

BCDR

Battery charging detector

Offset: 0x58, size: 32, reset: 0x00000000, access: Unspecified

9/9 fields covered.

Toggle fields BCDEN

Bit 0: Battery charging detector (BCD) enable.

Allowed values:
0: Disabled: disable the BCD support
1: Enabled: enable the BCD support within the USB device

DCDEN

Bit 1: Data contact detection (DCD) mode enable.

Allowed values:
0: Disabled: Data contact detection (DCD) mode disabled
1: Enabled: Data contact detection (DCD) mode enabled

PDEN

Bit 2: Primary detection (PD) mode enable.

Allowed values:
0: Disabled: Primary detection (PD) mode disabled
1: Enabled: Primary detection (PD) mode enabled

SDEN

Bit 3: Secondary detection (SD) mode enable.

Allowed values:
0: Disabled: Secondary detection (SD) mode disabled
1: Enabled: Secondary detection (SD) mode enabled

DCDET

Bit 4: Data contact detection (DCD) status.

Allowed values:
0: NotDetected: data lines contact not detected
1: Detected: data lines contact detected

PDET

Bit 5: Primary detection (PD) status.

Allowed values:
0: NoBCD: no BCD support detected
1: BCD: BCD support detected

SDET

Bit 6: Secondary detection (SD) status.

Allowed values:
0: CDP: CDP detected
1: DCP: DCP detected

PS2DET

Bit 7: DM pull-up detection status.

Allowed values:
0: Normal: Normal port detected
1: PS2: PS2 port or proprietary charger detected

DPPU

Bit 15: DP pull-up control.

Allowed values:
0: Disabled: signalize disconnect to the host when needed by the user software
1: Enabled: enable the embedded pull-up on the DP line

WWDG

0x40002c00: Window watchdog

6/6 fields covered.

Toggle register map Offset Name

0x0 (16-bit) CR WDGA T 0x4 (16-bit) CFR EWI WDGTB W 0x8 (16-bit) SR EWIF Toggle registers CR

Control register

Offset: 0x0, size: 16, reset: 0x0000007F, access: read-write

2/2 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 WDGA
rw T
rw Toggle fields T

Bits 0-6: 7-bit counter.

Allowed values: 0x0-0x7f

WDGA

Bit 7: Activation bit.

Allowed values:
0: Disabled: Watchdog disabled
1: Enabled: Watchdog enabled

CFR

Configuration register

Offset: 0x4, size: 16, reset: 0x0000007F, access: read-write

3/3 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EWI
rw WDGTB
rw W
rw Toggle fields W

Bits 0-6: 7-bit window value.

Allowed values: 0x0-0x7f

WDGTB

Bits 7-8: Timer base.

Allowed values:
0: Div1: Counter clock (PCLK1 div 4096) div 1
1: Div2: Counter clock (PCLK1 div 4096) div 2
2: Div4: Counter clock (PCLK1 div 4096) div 4
3: Div8: Counter clock (PCLK1 div 4096) div 8

EWI

Bit 9: Early wakeup interrupt.

Allowed values:
1: Enable: interrupt occurs whenever the counter reaches the value 0x40

Status register

Offset: 0x8, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 EWIF
r/w0c Toggle fields EWIF

Bit 0: Early wakeup interrupt flag.

Allowed values:
0: Finished: The EWI Interrupt Service Routine has been serviced
1: Pending: The EWI Interrupt Service Routine has been triggered

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4