Bases: plotly.basedatatypes.BaseLayoutHierarchyType
angle¶
Sets the angle (in degrees) from which the radial axis is drawn. Note that by default, radial axis line on the theta=0 line corresponds to a line pointing right (like what mathematicians prefer). Defaults to the first polar.sector angle.
The ‘angle’ property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
int|float
autorange¶
Determines whether or not the range of this axis is computed in relation to the input data. See rangemode for more info. If range is provided and it has a value for both the lower and upper bound, autorange is set to False. Using “min” applies autorange only to set the minimum. Using “max” applies autorange only to set the maximum. Using min reversed applies autorange only to set the minimum on a reversed axis. Using max reversed applies autorange only to set the maximum on a reversed axis. Using “reversed” applies autorange on both ends and reverses the axis direction.
[True, False, ‘reversed’, ‘min reversed’, ‘max reversed’, ‘min’, ‘max’]
Any
autorangeoptions¶
The ‘autorangeoptions’ property is an instance of Autorangeoptions that may be specified as:
plotly.graph_objects.layout.polar.radialaxis.Autorangeoptions
autotickangles¶
When tickangle is set to “auto”, it will be set to the first angle in this array that is large enough to prevent label overlap.
The ‘autotickangles’ property is an info array that may be specified as: * a list of elements where:
The ‘autotickangles[i]’ property is a angle (in degrees) that may be
specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
autotypenumbers¶
Using “strict” a numeric string in trace data is not converted to a number. Using convert types a numeric string in trace data may be treated as a number during automatic axis type detection. Defaults to layout.autotypenumbers.
[‘convert types’, ‘strict’]
Any
calendar¶
Sets the calendar system to use for range and tick0 if this is a date axis. This does not set the calendar for interpreting data on this axis, that’s specified in the trace or via the global layout.calendar
[‘chinese’, ‘coptic’, ‘discworld’, ‘ethiopian’, ‘gregorian’, ‘hebrew’, ‘islamic’, ‘jalali’, ‘julian’, ‘mayan’, ‘nanakshahi’, ‘nepali’, ‘persian’, ‘taiwan’, ‘thai’, ‘ummalqura’]
Any
categoryarray¶
Sets the order in which categories on this axis appear. Only has an effect if categoryorder is set to “array”. Used with categoryorder.
The ‘categoryarray’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
categoryarraysrc¶
Sets the source reference on Chart Studio Cloud for categoryarray.
The ‘categoryarraysrc’ property must be specified as a string or as a plotly.grid_objs.Column object
categoryorder¶
Specifies the ordering logic for the case of categorical variables. By default, plotly uses “trace”, which specifies the order that is present in the data supplied. Set categoryorder to category ascending or category descending if order should be determined by the alphanumerical order of the category names. Set categoryorder to “array” to derive the ordering from the attribute categoryarray. If a category is not found in the categoryarray array, the sorting behavior for that attribute will be identical to the “trace” mode. The unspecified categories will follow the categories in categoryarray. Set categoryorder to total ascending or total descending if order should be determined by the numerical order of the values. Similarly, the order can be determined by the min, max, sum, mean, geometric mean or median of all the values.
[‘trace’, ‘category ascending’, ‘category descending’, ‘array’, ‘total ascending’, ‘total descending’, ‘min ascending’, ‘min descending’, ‘max ascending’, ‘max descending’, ‘sum ascending’, ‘sum descending’, ‘mean ascending’, ‘mean descending’, ‘geometric mean ascending’, ‘geometric mean descending’, ‘median ascending’, ‘median descending’]
Any
color¶
Sets default for all colors associated with this axis all at once: line, font, tick, and grid colors. Grid color is lightened by blending this with the plot background Individual pieces can override this.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color: see https://plotly.com/python/css-colors/ for a list
dtick¶
Sets the step in-between ticks on this axis. Use with tick0. Must be a positive number, or special strings available to “log” and “date” axes. If the axis type is “log”, then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, … set dtick to 1. To set tick marks at 1, 100, 10000, … set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, … set dtick to log_10(5), or 0.69897000433. “log” has several special values; “L<f>”, where f is a positive number, gives ticks linearly spaced in value (but not position). For example tick0 = 0.1, dtick = “L0.5” will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use “D1” (all digits) or “D2” (only 2 and 5). tick0 is ignored for “D1” and “D2”. If the axis type is “date”, then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set dtick to 86400000.0. “date” also has special values “M<n>” gives ticks spaced by a number of months. n must be a positive integer. To set ticks on the 15th of every third month, set tick0 to “2000-01-15” and dtick to “M3”. To set ticks every 4 years, set dtick to “M48”
The ‘dtick’ property accepts values of any type
Any
exponentformat¶
Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If “none”, it appears as 1,000,000,000. If “e”, 1e+9. If “E”, 1E+9. If “power”, 1x10^9 (with 9 in a super script). If “SI”, 1G. If “B”, 1B.
[‘none’, ‘e’, ‘E’, ‘power’, ‘SI’, ‘B’]
Any
gridcolor¶
Sets the color of the grid lines.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color: see https://plotly.com/python/css-colors/ for a list
griddash¶
Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).
[‘solid’, ‘dot’, ‘dash’, ‘longdash’, ‘dashdot’, ‘longdashdot’]
(e.g. ‘5px 10px 2px 2px’, ‘5, 10, 2, 2’, ‘10% 20% 40%’, etc.)
gridwidth¶
Sets the width (in px) of the grid lines.
An int or float in the interval [0, inf]
int|float
hoverformat¶
Sets the hover text formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
labelalias¶
Replacement text for specific tick or hover labels. For example using {US: ‘USA’, CA: ‘Canada’} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html- like tags or MathJax.
The ‘labelalias’ property accepts values of any type
Any
layer¶
Sets the layer on which this axis is displayed. If above traces, this axis is displayed above all the subplot’s traces If below traces, this axis is displayed below all the subplot’s traces, but above the grid lines. Useful when used together with scatter-like traces with cliponaxis set to False to show markers and/or text nodes above this axis.
[‘above traces’, ‘below traces’]
Any
linecolor¶
Sets the axis line color.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color: see https://plotly.com/python/css-colors/ for a list
linewidth¶
Sets the width (in px) of the axis line.
An int or float in the interval [0, inf]
int|float
maxallowed¶
Determines the maximum range of this axis.
The ‘maxallowed’ property accepts values of any type
Any
minallowed¶
Determines the minimum range of this axis.
The ‘minallowed’ property accepts values of any type
Any
minexponent¶
Hide SI prefix for 10^n if |n| is below this number. This only has an effect when tickformat is “SI” or “B”.
An int or float in the interval [0, inf]
int|float
nticks¶
Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to nticks. Has an effect only if tickmode is set to “auto”.
An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]
range¶
type is “log”, then
you must take the log of your desired range (e.g. to set the range from 1 to 100, set the range from 0 to 2). If the axis type is “date”, it should be date strings, like date data, though Date objects and unix milliseconds will be accepted and converted to strings. If the axis type is “category”, it should be numbers, using the scale where each category is assigned a serial number from zero in the order it appears. Leaving either or both elements null impacts the default autorange.
The ‘range’ property is an info array that may be specified as:
a list or tuple of 2 elements where:
The ‘range[0]’ property accepts values of any type
The ‘range[1]’ property accepts values of any type
list
rangemode¶
If “tozero”, the range extends to 0, regardless of the input data If “nonnegative”, the range is non-negative, regardless of the input data. If “normal”, the range is computed in relation to the extrema of the input data (same behavior as for cartesian axes).
[‘tozero’, ‘nonnegative’, ‘normal’]
Any
separatethousands¶
If “true”, even 4-digit integers are separated
The ‘separatethousands’ property must be specified as a bool (either True, or False)
showexponent¶
If “all”, all exponents are shown besides their significands. If “first”, only the exponent of the first tick is shown. If “last”, only the exponent of the last tick is shown. If “none”, no exponents appear.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
showgrid¶
Determines whether or not grid lines are drawn. If True, the grid lines are drawn at every tick mark.
The ‘showgrid’ property must be specified as a bool (either True, or False)
showline¶
Determines whether or not a line bounding this axis is drawn.
The ‘showline’ property must be specified as a bool (either True, or False)
showticklabels¶
Determines whether or not the tick labels are drawn.
The ‘showticklabels’ property must be specified as a bool (either True, or False)
showtickprefix¶
If “all”, all tick labels are displayed with a prefix. If “first”, only the first tick is displayed with a prefix. If “last”, only the last tick is displayed with a suffix. If “none”, tick prefixes are hidden.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
showticksuffix¶
Same as showtickprefix but for tick suffixes.
[‘all’, ‘first’, ‘last’, ‘none’]
Any
side¶
Determines on which side of radial axis line the tick and tick labels appear.
[‘clockwise’, ‘counterclockwise’]
Any
tick0¶
Sets the placement of the first tick on this axis. Use with dtick. If the axis type is “log”, then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the tick0 to 2) except when dtick`=*L<f>* (see `dtick for more info). If the axis type is “date”, it should be a date string, like date data. If the axis type is “category”, it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.
The ‘tick0’ property accepts values of any type
Any
tickangle¶
Sets the angle of the tick labels with respect to the horizontal. For example, a tickangle of -90 draws the tick labels vertically.
The ‘tickangle’ property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90).
int|float
tickcolor¶
Sets the tick color.
A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color: see https://plotly.com/python/css-colors/ for a list
tickfont¶
Sets the tick font.
The ‘tickfont’ property is an instance of Tickfont that may be specified as:
tickformat¶
Sets the tick label formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”
A string
A number that will be converted to a string
tickformatstopdefaults¶
When used in a template (as layout.template.layout.polar.radial axis.tickformatstopdefaults), sets the default property values to use for elements of layout.polar.radialaxis.tickformatstops
The ‘tickformatstopdefaults’ property is an instance of Tickformatstop that may be specified as:
tickformatstops¶
The ‘tickformatstops’ property is a tuple of instances of Tickformatstop that may be specified as:
A list or tuple of instances of plotly.graph_objects.layout.polar.radialaxis.Tickformatstop
A list or tuple of dicts of string/value properties that will be passed to the Tickformatstop constructor
tuple[plotly.graph_objects.layout.polar.radialaxis.Tickformatstop]
ticklabelstep¶
Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. tick0 determines which labels are shown. Not implemented for axes with type “log” or “multicategory”, or when tickmode is “array”.
An int (or float that will be cast to an int) in the interval [1, 9223372036854775807]
ticklen¶
Sets the tick length (in px).
An int or float in the interval [0, inf]
int|float
tickmode¶
Sets the tick mode for this axis. If “auto”, the number of ticks is set via nticks. If “linear”, the placement of the ticks is determined by a starting position tick0 and a tick step dtick (“linear” is the default value if tick0 and dtick are provided). If “array”, the placement of the ticks is set via tickvals and the tick text is ticktext. (“array” is the default value if tickvals is provided).
[‘auto’, ‘linear’, ‘array’]
Any
tickprefix¶
Sets a tick label prefix.
A string
A number that will be converted to a string
ticks¶
Determines whether ticks are drawn or not. If “”, this axis’ ticks are not drawn. If “outside” (“inside”), this axis’ are drawn outside (inside) the axis lines.
[‘outside’, ‘inside’, ‘’]
Any
ticksuffix¶
Sets a tick label suffix.
A string
A number that will be converted to a string
ticktext¶
Sets the text displayed at the ticks position via tickvals. Only has an effect if tickmode is set to “array”. Used with tickvals.
The ‘ticktext’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
ticktextsrc¶
Sets the source reference on Chart Studio Cloud for ticktext.
The ‘ticktextsrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickvals¶
Sets the values at which ticks on this axis appear. Only has an effect if tickmode is set to “array”. Used with ticktext.
The ‘tickvals’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series
numpy.ndarray
tickvalssrc¶
Sets the source reference on Chart Studio Cloud for tickvals.
The ‘tickvalssrc’ property must be specified as a string or as a plotly.grid_objs.Column object
tickwidth¶
Sets the tick width (in px).
An int or float in the interval [0, inf]
int|float
title¶
The ‘title’ property is an instance of Title that may be specified as:
type¶
Sets the axis type. By default, plotly attempts to determined the axis type by looking into the data of the traces that referenced the axis in question.
[‘-‘, ‘linear’, ‘log’, ‘date’, ‘category’]
Any
uirevision¶
Controls persistence of user-driven changes in axis range, autorange, angle, and title if in editable: true configuration. Defaults to polar<N>.uirevision.
The ‘uirevision’ property accepts values of any type
Any
visible¶
A single toggle to hide the axis while preserving interaction like dragging. Default is true when a cheater plot is present on the axis, otherwise false
The ‘visible’ property must be specified as a bool (either True, or False)
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4