Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://plotly.com/python/reference/scattermapbox/ below:

Scattermapbox traces in Python

A

trace is a graph object in the figure's

list with any of the named arguments or attributes listed below.

"scattermapbox" trace is deprecated! Please consider switching to the "scattermap" trace type and `map` subplots. Learn more at: https://plotly.com/python/maplibre-migration/ as well as https://plotly.com/javascript/maplibre-migration/ The data visualized as scatter point, lines or marker symbols on a Mapbox GL geographic map is provided by longitude/latitude pairs in `lon` and `lat`.

• name
  Code: fig.update_traces(name=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string

  Sets the trace name. The trace name appears as the legend item and on hover.

• visible
  Code: fig.update_traces(visible=<VALUE>, selector=dict(type='scattermapbox'))
  Type: enumerated , one of ( True | False | "legendonly" )
  Default: True

  Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

• showlegend
  Code: fig.update_traces(showlegend=<VALUE>, selector=dict(type='scattermapbox'))
  Type: boolean
  Default: True

  Determines whether or not an item corresponding to this trace is shown in the legend.

• legend
  Code: fig.update_traces(legend=<VALUE>, selector=dict(type='scattermapbox'))
  Type: subplotid
  Default: legend

  Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc.

• legendrank
  Code: fig.update_traces(legendrank=<VALUE>, selector=dict(type='scattermapbox'))
  Type: number
  Default: 1000

  Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

• legendgroup
  Code: fig.update_traces(legendgroup=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string
  Default: ""

  Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

• legendgrouptitle
  Code: fig.update_traces(legendgrouptitle=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • font
    Code: fig.update_traces(legendgrouptitle_font=dict(...), selector=dict(type='scattermapbox'))
    Type: dict containing one or more of the keys listed below.

    Sets this legend group's title font.

    • color
      Code: fig.update_traces(legendgrouptitle_font_color=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color
    • family
      Code: fig.update_traces(legendgrouptitle_font_family=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string

      HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

    • lineposition
      Code: fig.update_traces(legendgrouptitle_font_lineposition=<VALUE>, selector=dict(type='scattermapbox'))
      Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
      Examples: "under", "over", "under+over", "under+over+through", "none"
      Default: "none"

      Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

    • shadow
      Code: fig.update_traces(legendgrouptitle_font_shadow=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string
      Default: "none"

      Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

    • size
      Code: fig.update_traces(legendgrouptitle_font_size=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 1
    • style
      Code: fig.update_traces(legendgrouptitle_font_style=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "normal" | "italic" )
      Default: "normal"

      Sets whether a font should be styled with a normal or italic face from its family.

    • textcase
      Code: fig.update_traces(legendgrouptitle_font_textcase=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
      Default: "normal"

      Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

    • variant
      Code: fig.update_traces(legendgrouptitle_font_variant=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
      Default: "normal"

      Sets the variant of the font.

    • weight
      Code: fig.update_traces(legendgrouptitle_font_weight=<VALUE>, selector=dict(type='scattermapbox'))
      Type: integer between or equal to 1 and 1000
      Default: normal

      Sets the weight (or boldness) of the font.

  • text
    Code: fig.update_traces(legendgrouptitle_text=<VALUE>, selector=dict(type='scattermapbox'))
    Type: string
    Default: ""

    Sets the title of the legend group.

• legendwidth
  Code: fig.update_traces(legendwidth=<VALUE>, selector=dict(type='scattermapbox'))
  Type: number greater than or equal to 0

  Sets the width (in px or fraction) of the legend for this trace.

• opacity
  Code: fig.update_traces(opacity=<VALUE>, selector=dict(type='scattermapbox'))
  Type: number between or equal to 0 and 1
  Default: 1

  Sets the opacity of the trace.

• mode
  Code: fig.update_traces(mode=<VALUE>, selector=dict(type='scattermapbox'))
  Type: flaglist string. Any combination of "lines", "markers", "text" joined with a "+" OR "none".
  Examples: "lines", "markers", "lines+markers", "lines+markers+text", "none"
  Default: "markers"

  Determines the drawing mode for this scatter trace. If the provided `mode` includes "text" then the `text` elements appear at the coordinates. Otherwise, the `text` elements appear on hover.

• ids
  Code: fig.update_traces(ids=<VALUE>, selector=dict(type='scattermapbox'))
  Type: list, numpy array, or Pandas series of numbers, strings, or datetimes.

  Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

• lat
  Code: fig.update_traces(lat=<VALUE>, selector=dict(type='scattermapbox'))
  Type: list, numpy array, or Pandas series of numbers, strings, or datetimes.

  Sets the latitude coordinates (in degrees North).

• lon
  Code: fig.update_traces(lon=<VALUE>, selector=dict(type='scattermapbox'))
  Type: list, numpy array, or Pandas series of numbers, strings, or datetimes.

  Sets the longitude coordinates (in degrees East).

• cluster
  Code: fig.update_traces(cluster=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • color
    Code: fig.update_traces(cluster_color=<VALUE>, selector=dict(type='scattermapbox'))
    Type: color or array of colors

    Sets the color for each cluster step.

  • enabled
    Code: fig.update_traces(cluster_enabled=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean

    Determines whether clustering is enabled or disabled.

  • maxzoom
    Code: fig.update_traces(cluster_maxzoom=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number between or equal to 0 and 24
    Default: 24

    Sets the maximum zoom level. At zoom levels equal to or greater than this, points will never be clustered.

  • opacity
    Code: fig.update_traces(cluster_opacity=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number or array of numbers between or equal to 0 and 1
    Default: 1

    Sets the marker opacity.

  • size
    Code: fig.update_traces(cluster_size=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number or array of numbers greater than or equal to 0
    Default: 20

    Sets the size for each cluster step.

  • step
    Code: fig.update_traces(cluster_step=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number or array of numbers greater than or equal to -1
    Default: -1

    Sets how many points it takes to create a cluster or advance to the next cluster step. Use this in conjunction with arrays for `size` and / or `color`. If an integer, steps start at multiples of this number. If an array, each step extends from the given value until one less than the next value.

• text
  Code: fig.update_traces(text=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string or array of strings
  Default: ""

  Sets text elements associated with each (lon,lat) pair If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (lon,lat) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

• textposition
  Code: fig.update_traces(textposition=<VALUE>, selector=dict(type='scattermapbox'))
  Type: enumerated , one of ( "top left" | "top center" | "top right" | "middle left" | "middle center" | "middle right" | "bottom left" | "bottom center" | "bottom right" )
  Default: "middle center"

  Sets the positions of the `text` elements with respects to the (x,y) coordinates.

• texttemplate
  Code: fig.update_traces(texttemplate=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string or array of strings
  Default: ""

  Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: True`) are available. Finally, the template string has access to variables `lat`, `lon` and `text`.

• hovertext
  Code: fig.update_traces(hovertext=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string or array of strings
  Default: ""

  Sets hover text elements associated with each (lon,lat) pair If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (lon,lat) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

• hoverinfo
  Code: fig.update_traces(hoverinfo=<VALUE>, selector=dict(type='scattermapbox'))
  Type: flaglist string. Any combination of "lon", "lat", "text", "name" joined with a "+" OR "all" or "none" or "skip".
  Examples: "lon", "lat", "lon+lat", "lon+lat+text", "all"
  Default: "all"

  Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

• hovertemplate
  Code: fig.update_traces(hovertemplate=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string or array of strings
  Default: ""

  Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: True`) are available. Anything contained in tag `<extra>` is displayed in the secondary box, for example `<extra>%{fullData.name}</extra>`. To hide the secondary box completely, use an empty tag `<extra></extra>`.

• meta
  Code: fig.update_traces(meta=<VALUE>, selector=dict(type='scattermapbox'))
  Type: number or categorical coordinate string

  Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

• customdata
  Code: fig.update_traces(customdata=<VALUE>, selector=dict(type='scattermapbox'))
  Type: list, numpy array, or Pandas series of numbers, strings, or datetimes.

  Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

• subplot
  Code: fig.update_traces(subplot=<VALUE>, selector=dict(type='scattermapbox'))
  Type: subplotid
  Default: mapbox

  mapbox subplots and traces are deprecated! Please consider switching to `map` subplots and traces. Learn more at: https://plotly.com/python/maplibre-migration/ as well as https://plotly.com/javascript/maplibre-migration/ Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.

• marker
  Code: fig.update_traces(marker=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • allowoverlap
    Code: fig.update_traces(marker_allowoverlap=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean

    Flag to draw all symbols, even if they overlap.

  • angle
    Code: fig.update_traces(marker_angle=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number or array of numbers
    Default: "auto"

    Sets the marker orientation from True North, in degrees clockwise. When using the "auto" default, no rotation would be applied in perspective views which is different from using a zero angle.

  • autocolorscale
    Code: fig.update_traces(marker_autocolorscale=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean
    Default: True

    Determines whether the colorscale is a default palette (`autocolorscale: True`) or the palette determined by `marker.colorscale`. Has an effect only if in `marker.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is True, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

  • cauto
    Code: fig.update_traces(marker_cauto=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean
    Default: True

    Determines whether or not the color domain is computed with respect to the input data (here in `marker.color`) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if in `marker.color` is set to a numerical array. Defaults to `False` when `marker.cmin` and `marker.cmax` are set by the user.

  • cmax
    Code: fig.update_traces(marker_cmax=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number

    Sets the upper bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmin` must be set as well.

  • cmid
    Code: fig.update_traces(marker_cmid=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number

    Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color`. Has no effect when `marker.cauto` is `False`.

  • cmin
    Code: fig.update_traces(marker_cmin=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number

    Sets the lower bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmax` must be set as well.

  • color
    Code: fig.update_traces(marker_color=<VALUE>, selector=dict(type='scattermapbox'))
    Type: color or array of colors

    Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.cmin` and `marker.cmax` if set.

  • coloraxis
    Code: fig.update_traces(marker_coloraxis=<VALUE>, selector=dict(type='scattermapbox'))
    Type: subplotid

    Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

  • colorbar
    Code: fig.update_traces(marker_colorbar=dict(...), selector=dict(type='scattermapbox'))
    Type: dict containing one or more of the keys listed below.
    • bgcolor
      Code: fig.update_traces(marker_colorbar_bgcolor=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color
      Default: "rgba(0,0,0,0)"

      Sets the color of padded area.

    • bordercolor
      Code: fig.update_traces(marker_colorbar_bordercolor=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color
      Default: "#444"

      Sets the axis line color.

    • borderwidth
      Code: fig.update_traces(marker_colorbar_borderwidth=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 0

      Sets the width (in px) or the border enclosing this color bar.

    • dtick
      Code: fig.update_traces(marker_colorbar_dtick=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number or categorical coordinate string

      Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n"dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L<f>", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M<n>" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48"

    • exponentformat
      Code: fig.update_traces(marker_colorbar_exponentformat=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "none" | "e" | "E" | "power" | "SI" | "B" )
      Default: "B"

      Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B.

    • labelalias
      Code: fig.update_traces(marker_colorbar_labelalias=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number or categorical coordinate string

      Replacement text for specific tick or hover labels. For example using {US: 'USA', CA: 'Canada'} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.

    • len
      Code: fig.update_traces(marker_colorbar_len=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 1

      Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.

    • lenmode
      Code: fig.update_traces(marker_colorbar_lenmode=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "fraction" | "pixels" )
      Default: "fraction"

      Determines whether this color bar's length (i.e. the measure in the color variation direction) is set in units of plot "fraction" or in "pixels. Use `len` to set the value.

    • minexponent
      Code: fig.update_traces(marker_colorbar_minexponent=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 3

      Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B".

    • nticks
      Code: fig.update_traces(marker_colorbar_nticks=<VALUE>, selector=dict(type='scattermapbox'))
      Type: integer greater than or equal to 0
      Default: 0

      Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto".

    • orientation
      Code: fig.update_traces(marker_colorbar_orientation=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "h" | "v" )
      Default: "v"

      Sets the orientation of the colorbar.

    • outlinecolor
      Code: fig.update_traces(marker_colorbar_outlinecolor=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color
      Default: "#444"

      Sets the axis line color.

    • outlinewidth
      Code: fig.update_traces(marker_colorbar_outlinewidth=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 1

      Sets the width (in px) of the axis line.

    • separatethousands
      Code: fig.update_traces(marker_colorbar_separatethousands=<VALUE>, selector=dict(type='scattermapbox'))
      Type: boolean

      If "True", even 4-digit integers are separated

    • showexponent
      Code: fig.update_traces(marker_colorbar_showexponent=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "all" | "first" | "last" | "none" )
      Default: "all"

      If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear.

    • showticklabels
      Code: fig.update_traces(marker_colorbar_showticklabels=<VALUE>, selector=dict(type='scattermapbox'))
      Type: boolean
      Default: True

      Determines whether or not the tick labels are drawn.

    • showtickprefix
      Code: fig.update_traces(marker_colorbar_showtickprefix=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "all" | "first" | "last" | "none" )
      Default: "all"

      If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden.

    • showticksuffix
      Code: fig.update_traces(marker_colorbar_showticksuffix=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "all" | "first" | "last" | "none" )
      Default: "all"

      Same as `showtickprefix` but for tick suffixes.

    • thickness
      Code: fig.update_traces(marker_colorbar_thickness=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 30

      Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.

    • thicknessmode
      Code: fig.update_traces(marker_colorbar_thicknessmode=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "fraction" | "pixels" )
      Default: "pixels"

      Determines whether this color bar's thickness (i.e. the measure in the constant color direction) is set in units of plot "fraction" or in "pixels". Use `thickness` to set the value.

    • tick0
      Code: fig.update_traces(marker_colorbar_tick0=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number or categorical coordinate string

      Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`="L<f>" (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.

    • tickangle
      Code: fig.update_traces(marker_colorbar_tickangle=<VALUE>, selector=dict(type='scattermapbox'))
      Type: angle
      Default: "auto"

      Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically.

    • tickcolor
      Code: fig.update_traces(marker_colorbar_tickcolor=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color
      Default: "#444"

      Sets the tick color.

    • tickfont
      Code: fig.update_traces(marker_colorbar_tickfont=dict(...), selector=dict(type='scattermapbox'))
      Type: dict containing one or more of the keys listed below.

      Sets the color bar's tick label font

      • color
        Code: fig.update_traces(marker_colorbar_tickfont_color=<VALUE>, selector=dict(type='scattermapbox'))
        Type: color
      • family
        Code: fig.update_traces(marker_colorbar_tickfont_family=<VALUE>, selector=dict(type='scattermapbox'))
        Type: string

        HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

      • lineposition
        Code: fig.update_traces(marker_colorbar_tickfont_lineposition=<VALUE>, selector=dict(type='scattermapbox'))
        Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
        Examples: "under", "over", "under+over", "under+over+through", "none"
        Default: "none"

        Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

      • shadow
        Code: fig.update_traces(marker_colorbar_tickfont_shadow=<VALUE>, selector=dict(type='scattermapbox'))
        Type: string
        Default: "none"

        Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

      • size
        Code: fig.update_traces(marker_colorbar_tickfont_size=<VALUE>, selector=dict(type='scattermapbox'))
        Type: number greater than or equal to 1
      • style
        Code: fig.update_traces(marker_colorbar_tickfont_style=<VALUE>, selector=dict(type='scattermapbox'))
        Type: enumerated , one of ( "normal" | "italic" )
        Default: "normal"

        Sets whether a font should be styled with a normal or italic face from its family.

      • textcase
        Code: fig.update_traces(marker_colorbar_tickfont_textcase=<VALUE>, selector=dict(type='scattermapbox'))
        Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
        Default: "normal"

        Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

      • variant
        Code: fig.update_traces(marker_colorbar_tickfont_variant=<VALUE>, selector=dict(type='scattermapbox'))
        Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
        Default: "normal"

        Sets the variant of the font.

      • weight
        Code: fig.update_traces(marker_colorbar_tickfont_weight=<VALUE>, selector=dict(type='scattermapbox'))
        Type: integer between or equal to 1 and 1000
        Default: normal

        Sets the weight (or boldness) of the font.

    • tickformat
      Code: fig.update_traces(marker_colorbar_tickformat=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string
      Default: ""

      Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"

    • tickformatstops
      Code: fig.update_traces(marker_colorbar_tickformatstops=list(...), selector=dict(type='scattermapbox'))
      Type: list of dict where each dict has one or more of the keys listed below.
      • dtickrange
        Parent: data[type=scattermapbox].marker.colorbar.tickformatstops[]
        Type: list

        range ["min", "max"], where "min", "max" - dtick values which describe some zoom level, it is possible to omit "min" or "max" value by passing "null"

      • enabled
        Parent: data[type=scattermapbox].marker.colorbar.tickformatstops[]
        Type: boolean
        Default: True

        Determines whether or not this stop is used. If `False`, this stop is ignored even within its `dtickrange`.

      • name
        Parent: data[type=scattermapbox].marker.colorbar.tickformatstops[]
        Type: string

        When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: False` or `enabled: False` to hide it). Has no effect outside of a template.

      • templateitemname
        Parent: data[type=scattermapbox].marker.colorbar.tickformatstops[]
        Type: string

        Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: False` or `enabled: False` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: True`.

      • value
        Parent: data[type=scattermapbox].marker.colorbar.tickformatstops[]
        Type: string
        Default: ""

        string - dtickformat for described zoom level, the same as "tickformat"

    • ticklabeloverflow
      Code: fig.update_traces(marker_colorbar_ticklabeloverflow=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "allow" | "hide past div" | "hide past domain" )

      Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is "hide past domain". In other cases the default is "hide past div".

    • ticklabelposition
      Code: fig.update_traces(marker_colorbar_ticklabelposition=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "outside" | "inside" | "outside top" | "inside top" | "outside left" | "inside left" | "outside right" | "inside right" | "outside bottom" | "inside bottom" )
      Default: "outside"

      Determines where tick labels are drawn relative to the ticks. Left and right options are used when `orientation` is "h", top and bottom when `orientation` is "v".

    • ticklabelstep
      Code: fig.update_traces(marker_colorbar_ticklabelstep=<VALUE>, selector=dict(type='scattermapbox'))
      Type: integer greater than or equal to 1
      Default: 1

      Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. `tick0` determines which labels are shown. Not implemented for axes with `type` "log" or "multicategory", or when `tickmode` is "array".

    • ticklen
      Code: fig.update_traces(marker_colorbar_ticklen=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 5

      Sets the tick length (in px).

    • tickmode
      Code: fig.update_traces(marker_colorbar_tickmode=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "auto" | "linear" | "array" )

      Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided).

    • tickprefix
      Code: fig.update_traces(marker_colorbar_tickprefix=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string
      Default: ""

      Sets a tick label prefix.

    • ticks
      Code: fig.update_traces(marker_colorbar_ticks=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "outside" | "inside" | "" )
      Default: ""

      Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines.

    • ticksuffix
      Code: fig.update_traces(marker_colorbar_ticksuffix=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string
      Default: ""

      Sets a tick label suffix.

    • ticktext
      Code: fig.update_traces(marker_colorbar_ticktext=<VALUE>, selector=dict(type='scattermapbox'))
      Type: list, numpy array, or Pandas series of numbers, strings, or datetimes.

      Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`.

    • tickvals
      Code: fig.update_traces(marker_colorbar_tickvals=<VALUE>, selector=dict(type='scattermapbox'))
      Type: list, numpy array, or Pandas series of numbers, strings, or datetimes.

      Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`.

    • tickwidth
      Code: fig.update_traces(marker_colorbar_tickwidth=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 1

      Sets the tick width (in px).

    • title
      Code: fig.update_traces(marker_colorbar_title=dict(...), selector=dict(type='scattermapbox'))
      Type: dict containing one or more of the keys listed below.
      • font
        Code: fig.update_traces(marker_colorbar_title_font=dict(...), selector=dict(type='scattermapbox'))
        Type: dict containing one or more of the keys listed below.

        Sets this color bar's title font.

        • color
          Code: fig.update_traces(marker_colorbar_title_font_color=<VALUE>, selector=dict(type='scattermapbox'))
          Type: color
        • family
          Code: fig.update_traces(marker_colorbar_title_font_family=<VALUE>, selector=dict(type='scattermapbox'))
          Type: string

          HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

        • lineposition
          Code: fig.update_traces(marker_colorbar_title_font_lineposition=<VALUE>, selector=dict(type='scattermapbox'))
          Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
          Examples: "under", "over", "under+over", "under+over+through", "none"
          Default: "none"

          Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

        • shadow
          Code: fig.update_traces(marker_colorbar_title_font_shadow=<VALUE>, selector=dict(type='scattermapbox'))
          Type: string
          Default: "none"

          Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

        • size
          Code: fig.update_traces(marker_colorbar_title_font_size=<VALUE>, selector=dict(type='scattermapbox'))
          Type: number greater than or equal to 1
        • style
          Code: fig.update_traces(marker_colorbar_title_font_style=<VALUE>, selector=dict(type='scattermapbox'))
          Type: enumerated , one of ( "normal" | "italic" )
          Default: "normal"

          Sets whether a font should be styled with a normal or italic face from its family.

        • textcase
          Code: fig.update_traces(marker_colorbar_title_font_textcase=<VALUE>, selector=dict(type='scattermapbox'))
          Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
          Default: "normal"

          Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

        • variant
          Code: fig.update_traces(marker_colorbar_title_font_variant=<VALUE>, selector=dict(type='scattermapbox'))
          Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
          Default: "normal"

          Sets the variant of the font.

        • weight
          Code: fig.update_traces(marker_colorbar_title_font_weight=<VALUE>, selector=dict(type='scattermapbox'))
          Type: integer between or equal to 1 and 1000
          Default: normal

          Sets the weight (or boldness) of the font.

      • side
        Code: fig.update_traces(marker_colorbar_title_side=<VALUE>, selector=dict(type='scattermapbox'))
        Type: enumerated , one of ( "right" | "top" | "bottom" )

        Determines the location of color bar's title with respect to the color bar. Defaults to "top" when `orientation` if "v" and defaults to "right" when `orientation` if "h".

      • text
        Code: fig.update_traces(marker_colorbar_title_text=<VALUE>, selector=dict(type='scattermapbox'))
        Type: string

        Sets the title of the color bar.

    • x
      Code: fig.update_traces(marker_colorbar_x=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number

      Sets the x position with respect to `xref` of the color bar (in plot fraction). When `xref` is "paper", defaults to 1.02 when `orientation` is "v" and 0.5 when `orientation` is "h". When `xref` is "container", defaults to "1" when `orientation` is "v" and 0.5 when `orientation` is "h". Must be between "0" and "1" if `xref` is "container" and between "-2" and "3" if `xref` is "paper".

    • xanchor
      Code: fig.update_traces(marker_colorbar_xanchor=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "left" | "center" | "right" )

      Sets this color bar's horizontal position anchor. This anchor binds the `x` position to the "left", "center" or "right" of the color bar. Defaults to "left" when `orientation` is "v" and "center" when `orientation` is "h".

    • xpad
      Code: fig.update_traces(marker_colorbar_xpad=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 10

      Sets the amount of padding (in px) along the x direction.

    • xref
      Code: fig.update_traces(marker_colorbar_xref=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "container" | "paper" )
      Default: "paper"

      Sets the container `x` refers to. "container" spans the entire `width` of the plot. "paper" refers to the width of the plotting area only.

    • y
      Code: fig.update_traces(marker_colorbar_y=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number

      Sets the y position with respect to `yref` of the color bar (in plot fraction). When `yref` is "paper", defaults to 0.5 when `orientation` is "v" and 1.02 when `orientation` is "h". When `yref` is "container", defaults to 0.5 when `orientation` is "v" and 1 when `orientation` is "h". Must be between "0" and "1" if `yref` is "container" and between "-2" and "3" if `yref` is "paper".

    • yanchor
      Code: fig.update_traces(marker_colorbar_yanchor=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "top" | "middle" | "bottom" )

      Sets this color bar's vertical position anchor This anchor binds the `y` position to the "top", "middle" or "bottom" of the color bar. Defaults to "middle" when `orientation` is "v" and "bottom" when `orientation` is "h".

    • ypad
      Code: fig.update_traces(marker_colorbar_ypad=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0
      Default: 10

      Sets the amount of padding (in px) along the y direction.

    • yref
      Code: fig.update_traces(marker_colorbar_yref=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated , one of ( "container" | "paper" )
      Default: "paper"

      Sets the container `y` refers to. "container" spans the entire `height` of the plot. "paper" refers to the height of the plotting area only.

  • colorscale
    Code: fig.update_traces(marker_colorscale=<VALUE>, selector=dict(type='scattermapbox'))
    Type: colorscale

    Sets the colorscale. Has an effect only if in `marker.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

  • opacity
    Code: fig.update_traces(marker_opacity=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number or array of numbers between or equal to 0 and 1

    Sets the marker opacity.

  • reversescale
    Code: fig.update_traces(marker_reversescale=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean

    Reverses the color mapping if True. Has an effect only if in `marker.color` is set to a numerical array. If True, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color.

  • showscale
    Code: fig.update_traces(marker_showscale=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean

    Determines whether or not a colorbar is displayed for this trace. Has an effect only if in `marker.color` is set to a numerical array.

  • size
    Code: fig.update_traces(marker_size=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number or array of numbers greater than or equal to 0
    Default: 6

    Sets the marker size (in px).

  • sizemin
    Code: fig.update_traces(marker_sizemin=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number greater than or equal to 0
    Default: 0

    Has an effect only if `marker.size` is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

  • sizemode
    Code: fig.update_traces(marker_sizemode=<VALUE>, selector=dict(type='scattermapbox'))
    Type: enumerated , one of ( "diameter" | "area" )
    Default: "diameter"

    Has an effect only if `marker.size` is set to a numerical array. Sets the rule for which the data in `size` is converted to pixels.

  • sizeref
    Code: fig.update_traces(marker_sizeref=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number
    Default: 1

    Has an effect only if `marker.size` is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with `sizemin` and `sizemode`.

  • symbol
    Code: fig.update_traces(marker_symbol=<VALUE>, selector=dict(type='scattermapbox'))
    Type: string or array of strings
    Default: "circle"

    Sets the marker symbol. Full list: https://www.mapbox.com/maki-icons/ Note that the array `marker.color` and `marker.size` are only available for "circle" symbols.

• line
  Code: fig.update_traces(line=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • color
    Code: fig.update_traces(line_color=<VALUE>, selector=dict(type='scattermapbox'))
    Type: color

    Sets the line color.

  • width
    Code: fig.update_traces(line_width=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number greater than or equal to 0
    Default: 2

    Sets the line width (in px).

• textfont
  Code: fig.update_traces(textfont=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.

  Sets the icon text font (color=mapbox.layer.paint.text-color, size=mapbox.layer.layout.text-size). Has an effect only when `type` is set to "symbol".

  • color
    Code: fig.update_traces(textfont_color=<VALUE>, selector=dict(type='scattermapbox'))
    Type: color
  • family
    Code: fig.update_traces(textfont_family=<VALUE>, selector=dict(type='scattermapbox'))
    Type: string
    Default: "Open Sans Regular, Arial Unicode MS Regular"

    HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

  • size
    Code: fig.update_traces(textfont_size=<VALUE>, selector=dict(type='scattermapbox'))
    Type: number greater than or equal to 1
  • style
    Code: fig.update_traces(textfont_style=<VALUE>, selector=dict(type='scattermapbox'))
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • weight
    Code: fig.update_traces(textfont_weight=<VALUE>, selector=dict(type='scattermapbox'))
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• selectedpoints
  Code: fig.update_traces(selectedpoints=<VALUE>, selector=dict(type='scattermapbox'))
  Type: number or categorical coordinate string

  Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

• selected
  Code: fig.update_traces(selected=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • marker
    Code: fig.update_traces(selected_marker=dict(...), selector=dict(type='scattermapbox'))
    Type: dict containing one or more of the keys listed below.
    • color
      Code: fig.update_traces(selected_marker_color=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color

      Sets the marker color of selected points.

    • opacity
      Code: fig.update_traces(selected_marker_opacity=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number between or equal to 0 and 1

      Sets the marker opacity of selected points.

    • size
      Code: fig.update_traces(selected_marker_size=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0

      Sets the marker size of selected points.

• unselected
  Code: fig.update_traces(unselected=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • marker
    Code: fig.update_traces(unselected_marker=dict(...), selector=dict(type='scattermapbox'))
    Type: dict containing one or more of the keys listed below.
    • color
      Code: fig.update_traces(unselected_marker_color=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color

      Sets the marker color of unselected points, applied only when a selection exists.

    • opacity
      Code: fig.update_traces(unselected_marker_opacity=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number between or equal to 0 and 1

      Sets the marker opacity of unselected points, applied only when a selection exists.

    • size
      Code: fig.update_traces(unselected_marker_size=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number greater than or equal to 0

      Sets the marker size of unselected points, applied only when a selection exists.

• below
  Code: fig.update_traces(below=<VALUE>, selector=dict(type='scattermapbox'))
  Type: string

  Determines if this scattermapbox trace's layers are to be inserted before the layer with the specified ID. By default, scattermapbox layers are inserted above all the base layers. To place the scattermapbox layers above every other layer, set `below` to "''".

• connectgaps
  Code: fig.update_traces(connectgaps=<VALUE>, selector=dict(type='scattermapbox'))
  Type: boolean

  Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

• fill
  Code: fig.update_traces(fill=<VALUE>, selector=dict(type='scattermapbox'))
  Type: enumerated , one of ( "none" | "toself" )
  Default: "none"

  Sets the area to fill with a solid color. Use with `fillcolor` if not "none". "toself" connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape.

• fillcolor
  Code: fig.update_traces(fillcolor=<VALUE>, selector=dict(type='scattermapbox'))
  Type: color

  Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

• hoverlabel
  Code: fig.update_traces(hoverlabel=dict(...), selector=dict(type='scattermapbox'))
  Type: dict containing one or more of the keys listed below.
  • align
    Code: fig.update_traces(hoverlabel_align=<VALUE>, selector=dict(type='scattermapbox'))
    Type: enumerated or array of enumerateds , one of ( "left" | "right" | "auto" )
    Default: "auto"

    Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

  • bgcolor
    Code: fig.update_traces(hoverlabel_bgcolor=<VALUE>, selector=dict(type='scattermapbox'))
    Type: color or array of colors

    Sets the background color of the hover labels for this trace

  • bordercolor
    Code: fig.update_traces(hoverlabel_bordercolor=<VALUE>, selector=dict(type='scattermapbox'))
    Type: color or array of colors

    Sets the border color of the hover labels for this trace.

  • font
    Code: fig.update_traces(hoverlabel_font=dict(...), selector=dict(type='scattermapbox'))
    Type: dict containing one or more of the keys listed below.

    Sets the font used in hover labels.

    • color
      Code: fig.update_traces(hoverlabel_font_color=<VALUE>, selector=dict(type='scattermapbox'))
      Type: color or array of colors
    • family
      Code: fig.update_traces(hoverlabel_font_family=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string or array of strings

      HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren't available.

    • lineposition
      Code: fig.update_traces(hoverlabel_font_lineposition=<VALUE>, selector=dict(type='scattermapbox'))
      Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
      Examples: "under", "over", "under+over", "under+over+through", "none"
      Default: "none"

      Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

    • shadow
      Code: fig.update_traces(hoverlabel_font_shadow=<VALUE>, selector=dict(type='scattermapbox'))
      Type: string or array of strings
      Default: "none"

      Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

    • size
      Code: fig.update_traces(hoverlabel_font_size=<VALUE>, selector=dict(type='scattermapbox'))
      Type: number or array of numbers greater than or equal to 1
    • style
      Code: fig.update_traces(hoverlabel_font_style=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
      Default: "normal"

      Sets whether a font should be styled with a normal or italic face from its family.

    • textcase
      Code: fig.update_traces(hoverlabel_font_textcase=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
      Default: "normal"

      Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

    • variant
      Code: fig.update_traces(hoverlabel_font_variant=<VALUE>, selector=dict(type='scattermapbox'))
      Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
      Default: "normal"

      Sets the variant of the font.

    • weight
      Code: fig.update_traces(hoverlabel_font_weight=<VALUE>, selector=dict(type='scattermapbox'))
      Type: integer or array of integers between or equal to 1 and 1000
      Default: normal

      Sets the weight (or boldness) of the font.

  • namelength
    Code: fig.update_traces(hoverlabel_namelength=<VALUE>, selector=dict(type='scattermapbox'))
    Type: integer or array of integers greater than or equal to -1
    Default: 15

    Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to `namelength - 3` characters and add an ellipsis.

  • showarrow
    Code: fig.update_traces(hoverlabel_showarrow=<VALUE>, selector=dict(type='scattermapbox'))
    Type: boolean
    Default: True

    Sets whether or not to show the hover label arrow/triangle pointing to the data point.

• uirevision
  Code: fig.update_traces(uirevision=<VALUE>, selector=dict(type='scattermapbox'))
  Type: number or categorical coordinate string

  Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: True` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: True}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4