Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://libvips.github.io/pyvips/intro.html below:

Website Navigation

• pyvips

Introduction — pyvips 2.2.1 documentation

See the main libvips site for an introduction to the underlying library. These notes introduce the Python binding.

https://libvips.github.io/libvips

This example loads a file, boosts the green channel, sharpens the image, and saves it back to disc again:

import pyvips

image = pyvips.Image.new_from_file('some-image.jpg', access='sequential')
image *= [1, 2, 1]
mask = pyvips.Image.new_from_list([[-1, -1, -1],
                                   [-1, 16, -1],
                                   [-1, -1, -1]
                                  ], scale=8)
image = image.conv(mask, precision='integer')
image.write_to_file('x.jpg')

Reading this example line by line, we have:

image = pyvips.Image.new_from_file('some-image.jpg', access='sequential')

Image.new_from_file() can load any image file supported by libvips. When you load an image, only the header is fetched from the file. Pixels will not be read until you have built a pipeline of operations and connected it to an output.

When you load, you can hint what type of access you will need. In this example, we will be accessing pixels top-to-bottom as we sweep through the image reading and writing, so sequential access mode is best for us. The default mode is random which allows for full random access to image pixels, but is slower and needs more memory. See enums.Access for details on the various modes available.

You can also load formatted images from memory with Image.new_from_buffer(), create images that wrap C-style memory arrays held as Python buffers with Image.new_from_memory(), or make images from constants with Image.new_from_list(). You can also create custom sources and targets that link image processing pipelines to your own code, see Custom sources and targets.

The next line:

Multiplies the image by an array constant using one array element for each image band. This line assumes that the input image has three bands and will double the middle band. For RGB images, that’s doubling green.

There is a full set arithmetic operator Overloads, so you can compute with entire images just as you would with single numbers.

Next we have:

mask = pyvips.Image.new_from_list([[-1, -1, -1],
                                   [-1, 16, -1],
                                   [-1, -1, -1]
                                  ], scale = 8)
image = image.conv(mask, precision = 'integer')

new_from_list() creates an image from a list of lists. The scale is the amount to divide the image by after integer convolution.

See the libvips API docs for vips_conv() (the operation invoked by Image.conv()) for details on the convolution operator. By default, it computes with a float mask, but integer is fine for this case, and is much faster.

Finally:

image.write_to_file('x.jpg')

write_to_file() writes an image back to the filesystem. It can write any format supported by vips: the file type is set from the filename suffix. You can also write formatted images to memory, or dump image data to a C-style array in a Python buffer.

pyvips adds a __getattr__() handler to Image and to the Image metaclass, then uses it to look up unknown names in libvips.

Names are first checked against the set of properties that libvips keeps for images, see width and friends. If the name is not found there, pyvips searches the set of libvips operations, see the next section.

As well as the core properties, you can read and write the metadata that libvips keeps for images with Image.get() and friends. For example:

image = pyvips.Image.new_from_file('some-image.jpg')
ipct_string = image.get('ipct-data')
exif_date_string = image.get('exif-ifd0-DateTime')

Use get_fields() to get a list of all the field names you can use with Image.get().

libvips caches and shares images between different parts of your program. This means that you can’t modify an image unless you are certain that you have the only reference to it. You can make a private copy of an image with copy, for example:

new_image = image.copy(xres=12, yres=13)

Now new_image is a private clone of image with xres and yres changed.

Set image metadata with Image.set(). Use Image.copy() to make a private copy of the image first, for example:

new_image = image.copy().set('icc-profile-data', new_profile)

Now new_image is a clone of image with a new ICC profile attached to it.

You can use new_from_array() to create a pyvips image from a NumPy array or a PIL image. For example:

import pyvips
import numpy as np

a = (np.random.random((100, 100, 3)) * 255).astype(np.uint8)
image = pyvips.Image.new_from_array(a)

import PIL.Image
pil_image = PIL.Image.new('RGB', (60, 30), color = 'red')
image = pyvips.Image.new_from_array(pil_image)

Going the other direction, a conversion from a pyvips image to a NumPy array can be obtained with the numpy() method of the pyvips.Image class or from the numpy side with numpy.asarray(). This is a fast way to load many image formats:

import pyvips
import numpy as np

image = pyvips.Image.new_from_file('some-image.jpg')
a1 = image.numpy()
a2 = np.asarray(image)

assert np.array_equal(a1, a2)

The PIL.Image.fromarray() method can be used to convert a pyvips image to a PIL image via a NumPy array:

import pyvips
import PIL.Image
image = pyvips.Image.black(100, 100, bands=3)
pil_image = PIL.Image.fromarray(image.numpy())

Unknown names which are not image properties are looked up as libvips operations. For example, the libvips operation add, which appears in C as vips_add(), appears in Python as Image.add().

The operation’s list of required arguments is searched and the first input image is set to the value of self. Operations which do not take an input image, such as Image.black(), appear as class methods. The remainder of the arguments you supply in the function call are used to set the other required input arguments. Any trailing keyword arguments are used to set options on the underlying libvips operation.

The result is the required output argument if there is only one result, or a list of values if the operation produces several results. If the operation has optional output objects, they are returned as a final Python dictionary.

For example, Image.min(), the vips operation that searches an image for the minimum value, has a large number of optional arguments. You can use it to find the minimum value like this:

You can ask it to return the position of the minimum with :x and :y:

min_value, opts = image.min(x=True, y=True)
x_pos = opts['x']
y_pos = opts['y']

Now x_pos and y_pos will have the coordinates of the minimum value. There’s actually a convenience method for this, minpos().

You can also ask for the top n minimum, for example:

min_value, opts = min(size=10, x_array=True, y_array=True)
x_pos = opts['x_array']
y_pos = opts['y_array']

Now x_pos and y_pos will be 10-element arrays.

Because operations are member functions and return the result image, you can chain them. For example, you can write:

result_image = image.real().cos()

to calculate the cosine of the real part of a complex image. There is also a full set of arithmetic Overloads.

libvips types are automatically wrapped. The binding looks at the type of argument required by the operation and converts the value you supply, when it can. For example, Image.linear() takes a VipsArrayDouble as an argument for the set of constants to use for multiplication. You can supply this value as an integer, a float, or some kind of compound object and it will be converted for you. You can write:

result_image = image.linear(1, 3)
result_image = image.linear(12.4, 13.9)
result_image = image.linear([1, 2, 3], [4, 5, 6])
result_image = image.linear(1, [4, 5, 6])

And so on. A set of overloads are defined for Image.linear(), see below.

If an operation takes several input images, you can use a constant for all but one of them and the wrapper will expand the constant to an image for you. For example, ifthenelse() uses a condition image to pick pixels between a then and an else image:

result_image = condition_image.ifthenelse(then_image, else_image)

You can use a constant instead of either the then or the else parts and it will be expanded to an image for you. If you use a constant for both then and else, it will be expanded to match the condition image. For example:

result_image = condition_image.ifthenelse([0, 255, 0], [255, 0, 0])

Will make an image where true pixels are green and false pixels are red.

This is useful for bandjoin(), the thing to join two or more images up bandwise. You can write:

to append a constant 255 band to an image, perhaps to add an alpha channel. Of course you can also write:

result_image = image1.bandjoin(image2)
result_image = image1.bandjoin([image2, image3])
result_image = pyvips.Image.bandjoin([image1, image2, image3])
result_image = image1.bandjoin([image2, 255])

and so on.

The module uses logging to log warnings from libvips, and debug messages from the module itself. Some warnings are important, for example truncated files, and you might want to see them.

Add these lines somewhere near the start of your program:

import logging
logging.basicConfig(level=logging.WARNING)

The wrapper spots errors from vips operations and raises the Error exception. You can catch it in the usual way.

The libvips enums, such as VipsBandFormat, appear in pyvips as strings like 'uchar'. They are documented as a set of classes for convenience, see Access, for example.

The wrapper defines the usual set of arithmetic, boolean and relational overloads on image. You can mix images, constants and lists of constants freely. For example, you can write:

result_image = ((image * [1, 2, 3]).abs() < 128) | 4

Some vips operators take an enum to select an action, for example Image.math() can be used to calculate sine of every pixel like this:

result_image = image.math('sin')

This is annoying, so the wrapper expands all these enums into separate members named after the enum value. So you can also write:

result_image = image.sin()

The wrapper defines a few extra useful utility functions: bandsplit(), maxpos(), minpos(), median().

You can attach progress handlers to images to watch the progress of computation.

For example:

image = pyvips.Image.black(1, 500)
image.set_progress(True)
image.signal_connect('preeval', preeval_handler)
image.signal_connect('eval', eval_handler)
image.signal_connect('posteval', posteval_handler)
image.avg()

Handlers are given a progress object containing a number of useful fields. For example:

def eval_handler(image, progress):
    print('run time so far (secs) = {}'.format(progress.run))
    print('estimated time of arrival (secs) = {}'.format(progress.eta))
    print('total number of pels to process = {}'.format(progress.tpels))
    print('number of pels processed so far = {}'.format(progress.npels))
    print('percent complete = {}'.format(progress.percent))

Use Image.set_kill() on the image to stop computation early.

For example:

def eval_handler(image, progress):
    if progress.percent > 50:
        image.set_kill(True)

You can load and save images to and from Source and Target.

For example:

source = pyvips.Source.new_from_file("some/file/name")
image = pyvips.Image.new_from_source(source, "", access="sequential")
target = pyvips.Target.new_to_file("some/file/name")
image.write_to_target(target, ".png")

Sources and targets can be files, descriptors (eg. pipes) and areas of memory.

You can define SourceCustom and TargetCustom too.

For example:

input_file = open(sys.argv[1], "rb")

def read_handler(size):
    return input_file.read(size)

source = pyvips.SourceCustom()
source.on_read(read_handler)

output_file = open(sys.argv[2], "wb")

def write_handler(chunk):
    return output_file.write(chunk)

target = pyvips.TargetCustom()
target.on_write(write_handler)

image = pyvips.Image.new_from_source(source, '', access='sequential')
image.write_to_target(target, '.png')

You can also define seek and finish handlers, see the docs.

The bulk of these API docs are generated automatically by Operation.generate_sphinx_all(). It examines libvips and writes a summary of each operation and the arguments and options that that operation expects.

Use the C API docs for more detail:

https://libvips.github.io/libvips/API/current

Paint operations like Image.draw_circle() and Image.draw_line() modify their input image. This makes them hard to use with the rest of libvips: you need to be very careful about the order in which operations execute or you can get nasty crashes.

The wrapper spots operations of this type and makes a private copy of the image in memory before calling the operation. This stops crashes, but it does make it inefficient. If you draw 100 lines on an image, for example, you’ll copy the image 100 times. The wrapper does make sure that memory is recycled where possible, so you won’t have 100 copies in memory.

If you want to avoid the copies, you’ll need to call drawing operations yourself.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4