Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://learn.microsoft.com/en-us/aspnet/core/fundamentals/native-aot/ below:

ASP.NET Core support for Native AOT

By Mitch Denny

For Blazor WebAssembly Native AOT guidance, which adds to or supersedes the guidance in this article, see ASP.NET Core Blazor WebAssembly build tools and ahead-of-time (AOT) compilation.

Publishing and deploying a Native AOT app provides the following benefits:

• Minimized disk footprint: When publishing using Native AOT, a single executable is produced containing just the code from external dependencies that is needed to support the program. Reduced executable size can lead to:
  • Smaller container images, for example in containerized deployment scenarios.
  • Reduced deployment time from smaller images.
• Reduced startup time: Native AOT applications can show reduced start-up times, which means
  • The app is ready to service requests quicker.
  • Improved deployment where container orchestrators need to manage transition from one version of the app to another.
• Reduced memory demand: Native AOT apps can have reduced memory demands, depending on the work done by the app. Reduced memory consumption can lead to greater deployment density and improved scalability.

The template app was run in our benchmarking lab to compare performance of an AOT published app, a trimmed runtime app, and an untrimmed runtime app. The following chart shows the results of the benchmarking:

The preceding chart shows that Native AOT has lower app size, memory usage, and startup time.

Not all features in ASP.NET Core are currently compatible with Native AOT. The following table summarizes ASP.NET Core feature compatibility with Native AOT:

For more information on limitations, see:

• Limitations of Native AOT deployment
• Introduction to AOT warnings
• Known trimming incompatibilities
• Introduction to trim warnings
• GitHub issue dotnet/core #8288

It's important to test an app thoroughly when moving to a Native AOT deployment model. The AOT deployed app should be tested to verify functionality hasn't changed from the untrimmed and JIT-compiled app. When building the app, review and correct AOT warnings. An app that issues AOT warnings during publishing may not work correctly. If no AOT warnings are issued at publish time, the published AOT app should work the same as the untrimmed and JIT-compiled app.

Native AOT is enabled with the PublishAot MSBuild property. The following example shows how to enable Native AOT in a project file:

<PropertyGroup>
  <PublishAot>true</PublishAot>
</PropertyGroup>

This setting enables Native AOT compilation during publish and enables dynamic code usage analysis during build and editing. A project that uses Native AOT publishing uses JIT compilation when running locally. An AOT app has the following differences from a JIT-compiled app:

• Features that aren't compatible with Native AOT are disabled and throw exceptions at run time.
• A source analyzer is enabled to highlight code that isn't compatible with Native AOT. At publish time, the entire app, including NuGet packages, are analyzed for compatibility again.

Native AOT analysis includes all of the app's code and the libraries the app depends on. Review Native AOT warnings and take corrective steps. It's a good idea to publish apps frequently to discover issues early in the development lifecycle.

In .NET 8, Native AOT is supported by the following ASP.NET Core app types:

• minimal APIs - For more information, see the The Web API (Native AOT) template section later in this article.
• gRPC - For more information, see gRPC and Native AOT.
• Worker services - For more information, see AOT in Worker Service templates.

The ASP.NET Core Web API (Native AOT) template (short name webapiaot) creates a project with AOT enabled. The template differs from the Web API project template in the following ways:

• Uses minimal APIs only, as MVC isn't yet compatible with Native AOT.
• Uses the CreateSlimBuilder() API to ensure only the essential features are enabled by default, minimizing the app's deployed size.
• Is configured to listen on HTTP only, as HTTPS traffic is commonly handled by an ingress service in cloud-native deployments.
• Doesn't include a launch profile for running under IIS or IIS Express.
• Creates an .http file configured with sample HTTP requests that can be sent to the app's endpoints.
• Includes a sample Todo API instead of the weather forecast sample.
• Adds PublishAot to the project file, as shown earlier in this article.
• Enables the JSON serializer source generators. The source generator is used to generate serialization code at build time, which is required for Native AOT compilation.

The following example shows the code added to the Program.cs file to support JSON serialization source generation:

using MyFirstAotWebApi;
+using System.Text.Json.Serialization;

-var builder = WebApplication.CreateBuilder();
+var builder = WebApplication.CreateSlimBuilder(args);

+builder.Services.ConfigureHttpJsonOptions(options =>
+{
+  options.SerializerOptions.TypeInfoResolverChain.Insert(0, AppJsonSerializerContext.Default);
+});

var app = builder.Build();

var sampleTodos = TodoGenerator.GenerateTodos().ToArray();

var todosApi = app.MapGroup("/todos");
todosApi.MapGet("/", () => sampleTodos);
todosApi.MapGet("/{id}", (int id) =>
    sampleTodos.FirstOrDefault(a => a.Id == id) is { } todo
        ? Results.Ok(todo)
        : Results.NotFound());

app.Run();

+[JsonSerializable(typeof(Todo[]))]
+internal partial class AppJsonSerializerContext : JsonSerializerContext
+{
+
+}

Without this added code, System.Text.Json uses reflection to serialize and deserialize JSON. Reflection isn't supported in Native AOT.

For more information, see:

• Combine source generators
• TypeInfoResolverChain

The launchSettings.json file created by the Web API (Native AOT) template has the iisSettings section and IIS Express profile removed:

{
  "$schema": "http://json.schemastore.org/launchsettings.json",
-  "iisSettings": {
-     "windowsAuthentication": false,
-     "anonymousAuthentication": true,
-     "iisExpress": {
-       "applicationUrl": "http://localhost:11152",
-       "sslPort": 0
-     }
-   },
  "profiles": {
    "http": {
      "commandName": "Project",
      "dotnetRunMessages": true,
      "launchBrowser": true,
      "launchUrl": "todos",
      "applicationUrl": "http://localhost:5102",
        "environmentVariables": {
          "ASPNETCORE_ENVIRONMENT": "Development"
        }
      },
-     "IIS Express": {
-       "commandName": "IISExpress",
-       "launchBrowser": true,
-       "launchUrl": "todos",
-      "environmentVariables": {
-       "ASPNETCORE_ENVIRONMENT": "Development"
-      }
-    }
  }
}

The template uses the CreateSlimBuilder() method instead of the CreateBuilder() method.

using System.Text.Json.Serialization;
using MyFirstAotWebApi;

var builder = WebApplication.CreateSlimBuilder(args);
builder.Logging.AddConsole();

builder.Services.ConfigureHttpJsonOptions(options =>
{
    options.SerializerOptions.TypeInfoResolverChain.Insert(0, AppJsonSerializerContext.Default);
});

var app = builder.Build();

var sampleTodos = TodoGenerator.GenerateTodos().ToArray();

var todosApi = app.MapGroup("/todos");
todosApi.MapGet("/", () => sampleTodos);
todosApi.MapGet("/{id}", (int id) =>
    sampleTodos.FirstOrDefault(a => a.Id == id) is { } todo
        ? Results.Ok(todo)
        : Results.NotFound());

app.Run();

[JsonSerializable(typeof(Todo[]))]
internal partial class AppJsonSerializerContext : JsonSerializerContext
{
}

The CreateSlimBuilder method initializes the WebApplicationBuilder with the minimum ASP.NET Core features necessary to run an app.

As noted earlier, the CreateSlimBuilder method doesn't include support for HTTPS or HTTP/3. These protocols typically aren't required for apps that run behind a TLS termination proxy. For example, see TLS termination and end to end TLS with Application Gateway. HTTPS can be enabled by calling builder.WebHost.UseKestrelHttpsConfiguration HTTP/3 can be enabled by calling builder.WebHost.UseQuic.

The CreateSlimBuilder method doesn't support the following features that are supported by the CreateBuilder method:

• Hosting startup assemblies
• UseStartup
• The following logging providers:
  • Windows EventLog
  • Debug
  • Event Source
• Web hosting features:
  • UseStaticWebAssets
  • IIS Integration
• Kestrel configuration
  • HTTPS endpoints in Kestrel
  • Quic (HTTP/3)
• Regex and alpha constraints used in routing

The CreateSlimBuilder method includes the following features needed for an efficient development experience:

• JSON file configuration for appsettings.json and appsettings.{EnvironmentName}.json.
• User secrets configuration.
• Console logging.
• Logging configuration.

For a builder that omits the preceding features, see The CreateEmptyBuilder method.

Including minimal features has benefits for trimming as well as AOT. For more information, see Trim self-contained deployments and executables.

For more detailed information, see Comparing WebApplication.CreateBuilder to CreateSlimBuilder

Because unused code is trimmed during publishing for Native AOT, the app can't use unbounded reflection at runtime. Source generators are used to produce code that avoids the need for reflection. In some cases, source generators produce code optimized for AOT even when a generator isn't required.

To view the source code that is generated, add the EmitCompilerGeneratedFiles property to an app's .csproj file, as shown in the following example:

<Project Sdk="Microsoft.NET.Sdk.Web">

  <PropertyGroup>
    <!-- Other properties omitted for brevity -->
    <EmitCompilerGeneratedFiles>true</EmitCompilerGeneratedFiles>
  </PropertyGroup>

</Project>

Run the dotnet build command to see the generated code. The output includes an obj/Debug/net8.0/generated/ directory that contains all the generated files for the project.

The dotnet publish command also compiles the source files and generates files that are compiled. In addition, dotnet publish passes the generated assemblies to a native IL compiler. The IL compiler produces the native executable. The native executable contains the native machine code.

Many of the popular libraries used in ASP.NET Core projects currently have some compatibility issues when used in a project targeting Native AOT, such as:

• Use of reflection to inspect and discover types.
• Conditionally loading libraries at runtime.
• Generating code on the fly to implement functionality.

Libraries using these dynamic features need to be updated in order to work with Native AOT. They can be updated using tools like Roslyn source generators.

Library authors hoping to support Native AOT are encouraged to:

• Read about Native AOT compatibility requirements.
• Prepare the library for trimming.

The Minimal API framework is optimized for receiving and returning JSON payloads using System.Text.Json. System.Text.Json:

• Imposes compatibility requirements for JSON and Native AOT.
• Requires the use of the System.Text.Json source generator.

All types that are transmitted as part of the HTTP body or returned from request delegates in Minimal APIs apps must be configured on a JsonSerializerContext that is registered via ASP.NET Core’s dependency injection:

using System.Text.Json.Serialization;
using MyFirstAotWebApi;

var builder = WebApplication.CreateSlimBuilder(args);
builder.Logging.AddConsole();

builder.Services.ConfigureHttpJsonOptions(options =>
{
    options.SerializerOptions.TypeInfoResolverChain.Insert(0, AppJsonSerializerContext.Default);
});

var app = builder.Build();

var sampleTodos = TodoGenerator.GenerateTodos().ToArray();

var todosApi = app.MapGroup("/todos");
todosApi.MapGet("/", () => sampleTodos);
todosApi.MapGet("/{id}", (int id) =>
    sampleTodos.FirstOrDefault(a => a.Id == id) is { } todo
        ? Results.Ok(todo)
        : Results.NotFound());

app.Run();

[JsonSerializable(typeof(Todo[]))]
internal partial class AppJsonSerializerContext : JsonSerializerContext
{
}

In the preceding highlighted code:

• The JSON serializer context is registered with the DI container. For more information, see:
  • Combine source generators
  • TypeInfoResolverChain
• The custom JsonSerializerContext is annotated with the [JsonSerializable] attribute to enable source generated JSON serializer code for the ToDo type.

A parameter on the delegate that isn't bound to the body and does not need to be serializable. For example, a query string parameter that is a rich object type and implements IParsable<T>.

public class Todo
{
    public int Id { get; set; }
    public string? Title { get; set; }
    public DateOnly? DueBy { get; set; }
    public bool IsComplete { get; set; }
}

static class TodoGenerator
{
    private static readonly (string[] Prefixes, string[] Suffixes)[] _parts = new[]
        {
            (new[] { "Walk the", "Feed the" }, new[] { "dog", "cat", "goat" }),
            (new[] { "Do the", "Put away the" }, new[] { "groceries", "dishes", "laundry" }),
            (new[] { "Clean the" }, new[] { "bathroom", "pool", "blinds", "car" })
        };
    // Remaining code omitted for brevity.

See this GitHub issue to report or review issues with Native AOT support in ASP.NET Core.

• Tutorial: Publish an ASP.NET Core app using Native AOT
• Native AOT deployment
• Optimize AOT deployments
• Configuration-binding source generator
• Using the configuration binder source generator
• The minimal API AOT compilation template
• Comparing WebApplication.CreateBuilder to CreateSlimBuilder
• Exploring the new minimal API source generator
• Replacing method calls with Interceptors
• Behind [LogProperties] and the new telemetry logging source generator

ASP.NET Core 8.0 introduces support for .NET native ahead-of-time (AOT).

Publishing and deploying a Native AOT app provides the following benefits:

• Minimized disk footprint: When publishing using Native AOT, a single executable is produced containing just the code from external dependencies that is needed to support the program. Reduced executable size can lead to:
  • Smaller container images, for example in containerized deployment scenarios.
  • Reduced deployment time from smaller images.
• Reduced startup time: Native AOT applications can show reduced start-up times, which means
  • The app is ready to service requests quicker.
  • Improved deployment where container orchestrators need to manage transition from one version of the app to another.
• Reduced memory demand: Native AOT apps can have reduced memory demands, depending on the work done by the app. Reduced memory consumption can lead to greater deployment density and improved scalability.

The template app was run in our benchmarking lab to compare performance of an AOT published app, a trimmed runtime app, and an untrimmed runtime app. The following chart shows the results of the benchmarking:

The preceding chart shows that Native AOT has lower app size, memory usage, and startup time.

Not all features in ASP.NET Core are currently compatible with Native AOT. The following table summarizes ASP.NET Core feature compatibility with Native AOT:

For more information on limitations, see:

• Limitations of Native AOT deployment
• Introduction to AOT warnings
• Known trimming incompatibilities
• Introduction to trim warnings
• GitHub issue dotnet/core #8288

It's important to test an app thoroughly when moving to a Native AOT deployment model. The AOT deployed app should be tested to verify functionality hasn't changed from the untrimmed and JIT-compiled app. When building the app, review and correct AOT warnings. An app that issues AOT warnings during publishing may not work correctly. If no AOT warnings are issued at publish time, the published AOT app should work the same as the untrimmed and JIT-compiled app.

Native AOT is enabled with the PublishAot MSBuild property. The following example shows how to enable Native AOT in a project file:

<PropertyGroup>
  <PublishAot>true</PublishAot>
</PropertyGroup>

This setting enables Native AOT compilation during publish and enables dynamic code usage analysis during build and editing. A project that uses Native AOT publishing uses JIT compilation when running locally. An AOT app has the following differences from a JIT-compiled app:

• Features that aren't compatible with Native AOT are disabled and throw exceptions at run time.
• A source analyzer is enabled to highlight code that isn't compatible with Native AOT. At publish time, the entire app, including NuGet packages, are analyzed for compatibility again.

Native AOT analysis includes all of the app's code and the libraries the app depends on. Review Native AOT warnings and take corrective steps. It's a good idea to publish apps frequently to discover issues early in the development lifecycle.

In .NET 8, Native AOT is supported by the following ASP.NET Core app types:

• minimal APIs - For more information, see the The Web API (Native AOT) template section later in this article.
• gRPC - For more information, see gRPC and Native AOT.
• Worker services - For more information, see AOT in Worker Service templates.

The ASP.NET Core Web API (Native AOT) template (short name webapiaot) creates a project with AOT enabled. The template differs from the Web API project template in the following ways:

• Uses minimal APIs only, as MVC isn't yet compatible with Native AOT.
• Uses the CreateSlimBuilder() API to ensure only the essential features are enabled by default, minimizing the app's deployed size.
• Is configured to listen on HTTP only, as HTTPS traffic is commonly handled by an ingress service in cloud-native deployments.
• Doesn't include a launch profile for running under IIS or IIS Express.
• Creates an .http file configured with sample HTTP requests that can be sent to the app's endpoints.
• Includes a sample Todo API instead of the weather forecast sample.
• Adds PublishAot to the project file, as shown earlier in this article.
• Enables the JSON serializer source generators. The source generator is used to generate serialization code at build time, which is required for Native AOT compilation.

The following example shows the code added to the Program.cs file to support JSON serialization source generation:

using MyFirstAotWebApi;
+using System.Text.Json.Serialization;

-var builder = WebApplication.CreateBuilder();
+var builder = WebApplication.CreateSlimBuilder(args);

+builder.Services.ConfigureHttpJsonOptions(options =>
+{
+  options.SerializerOptions.TypeInfoResolverChain.Insert(0, AppJsonSerializerContext.Default);
+});

var app = builder.Build();

var sampleTodos = TodoGenerator.GenerateTodos().ToArray();

var todosApi = app.MapGroup("/todos");
todosApi.MapGet("/", () => sampleTodos);
todosApi.MapGet("/{id}", (int id) =>
    sampleTodos.FirstOrDefault(a => a.Id == id) is { } todo
        ? Results.Ok(todo)
        : Results.NotFound());

app.Run();

+[JsonSerializable(typeof(Todo[]))]
+internal partial class AppJsonSerializerContext : JsonSerializerContext
+{
+
+}

Without this added code, System.Text.Json uses reflection to serialize and deserialize JSON. Reflection isn't supported in Native AOT.

For more information, see:

• Combine source generators
• TypeInfoResolverChain

The launchSettings.json file created by the Web API (Native AOT) template has the iisSettings section and IIS Express profile removed:

{
  "$schema": "http://json.schemastore.org/launchsettings.json",
-  "iisSettings": {
-     "windowsAuthentication": false,
-     "anonymousAuthentication": true,
-     "iisExpress": {
-       "applicationUrl": "http://localhost:11152",
-       "sslPort": 0
-     }
-   },
  "profiles": {
    "http": {
      "commandName": "Project",
      "dotnetRunMessages": true,
      "launchBrowser": true,
      "launchUrl": "todos",
      "applicationUrl": "http://localhost:5102",
        "environmentVariables": {
          "ASPNETCORE_ENVIRONMENT": "Development"
        }
      },
-     "IIS Express": {
-       "commandName": "IISExpress",
-       "launchBrowser": true,
-       "launchUrl": "todos",
-      "environmentVariables": {
-       "ASPNETCORE_ENVIRONMENT": "Development"
-      }
-    }
  }
}

The template uses the CreateSlimBuilder() method instead of the CreateBuilder() method.

using System.Text.Json.Serialization;
using MyFirstAotWebApi;

var builder = WebApplication.CreateSlimBuilder(args);
builder.Logging.AddConsole();

builder.Services.ConfigureHttpJsonOptions(options =>
{
    options.SerializerOptions.TypeInfoResolverChain.Insert(0, AppJsonSerializerContext.Default);
});

var app = builder.Build();

var sampleTodos = TodoGenerator.GenerateTodos().ToArray();

var todosApi = app.MapGroup("/todos");
todosApi.MapGet("/", () => sampleTodos);
todosApi.MapGet("/{id}", (int id) =>
    sampleTodos.FirstOrDefault(a => a.Id == id) is { } todo
        ? Results.Ok(todo)
        : Results.NotFound());

app.Run();

[JsonSerializable(typeof(Todo[]))]
internal partial class AppJsonSerializerContext : JsonSerializerContext
{
}

The CreateSlimBuilder method initializes the WebApplicationBuilder with the minimum ASP.NET Core features necessary to run an app.

As noted earlier, the CreateSlimBuilder method doesn't include support for HTTPS or HTTP/3. These protocols typically aren't required for apps that run behind a TLS termination proxy. For example, see TLS termination and end to end TLS with Application Gateway. HTTPS can be enabled by calling builder.WebHost.UseKestrelHttpsConfiguration HTTP/3 can be enabled by calling builder.WebHost.UseQuic.

The CreateSlimBuilder method doesn't support the following features that are supported by the CreateBuilder method:

• Hosting startup assemblies
• UseStartup
• The following logging providers:
  • Windows EventLog
  • Debug
  • Event Source
• Web hosting features:
  • UseStaticWebAssets
  • IIS Integration
• Kestrel configuration
  • HTTPS endpoints in Kestrel
  • Quic (HTTP/3)
• Regex and alpha constraints used in routing

The CreateSlimBuilder method includes the following features needed for an efficient development experience:

• JSON file configuration for appsettings.json and appsettings.{EnvironmentName}.json.
• User secrets configuration.
• Console logging.
• Logging configuration.

For a builder that omits the preceding features, see The CreateEmptyBuilder method.

Including minimal features has benefits for trimming as well as AOT. For more information, see Trim self-contained deployments and executables.

For more detailed information, see Comparing WebApplication.CreateBuilder to CreateSlimBuilder

Because unused code is trimmed during publishing for Native AOT, the app can't use unbounded reflection at runtime. Source generators are used to produce code that avoids the need for reflection. In some cases, source generators produce code optimized for AOT even when a generator isn't required.

To view the source code that is generated, add the EmitCompilerGeneratedFiles property to an app's .csproj file, as shown in the following example:

<Project Sdk="Microsoft.NET.Sdk.Web">

  <PropertyGroup>
    <!-- Other properties omitted for brevity -->
    <EmitCompilerGeneratedFiles>true</EmitCompilerGeneratedFiles>
  </PropertyGroup>

</Project>

Run the dotnet build command to see the generated code. The output includes an obj/Debug/net8.0/generated/ directory that contains all the generated files for the project.

The dotnet publish command also compiles the source files and generates files that are compiled. In addition, dotnet publish passes the generated assemblies to a native IL compiler. The IL compiler produces the native executable. The native executable contains the native machine code.

Many of the popular libraries used in ASP.NET Core projects currently have some compatibility issues when used in a project targeting Native AOT, such as:

• Use of reflection to inspect and discover types.
• Conditionally loading libraries at runtime.
• Generating code on the fly to implement functionality.

Libraries using these dynamic features need to be updated in order to work with Native AOT. They can be updated using tools like Roslyn source generators.

Library authors hoping to support Native AOT are encouraged to:

• Read about Native AOT compatibility requirements.
• Prepare the library for trimming.

The Minimal API framework is optimized for receiving and returning JSON payloads using System.Text.Json. System.Text.Json:

• Imposes compatibility requirements for JSON and Native AOT.
• Requires the use of the System.Text.Json source generator.

All types that are transmitted as part of the HTTP body or returned from request delegates in Minimal APIs apps must be configured on a JsonSerializerContext that is registered via ASP.NET Core’s dependency injection:

using System.Text.Json.Serialization;
using MyFirstAotWebApi;

var builder = WebApplication.CreateSlimBuilder(args);
builder.Logging.AddConsole();

builder.Services.ConfigureHttpJsonOptions(options =>
{
    options.SerializerOptions.TypeInfoResolverChain.Insert(0, AppJsonSerializerContext.Default);
});

var app = builder.Build();

var sampleTodos = TodoGenerator.GenerateTodos().ToArray();

var todosApi = app.MapGroup("/todos");
todosApi.MapGet("/", () => sampleTodos);
todosApi.MapGet("/{id}", (int id) =>
    sampleTodos.FirstOrDefault(a => a.Id == id) is { } todo
        ? Results.Ok(todo)
        : Results.NotFound());

app.Run();

[JsonSerializable(typeof(Todo[]))]
internal partial class AppJsonSerializerContext : JsonSerializerContext
{
}

In the preceding highlighted code:

• The JSON serializer context is registered with the DI container. For more information, see:
  • Combine source generators
  • TypeInfoResolverChain
• The custom JsonSerializerContext is annotated with the [JsonSerializable] attribute to enable source generated JSON serializer code for the ToDo type.

A parameter on the delegate that isn't bound to the body and does not need to be serializable. For example, a query string parameter that is a rich object type and implements IParsable<T>.

public class Todo
{
    public int Id { get; set; }
    public string? Title { get; set; }
    public DateOnly? DueBy { get; set; }
    public bool IsComplete { get; set; }
}

static class TodoGenerator
{
    private static readonly (string[] Prefixes, string[] Suffixes)[] _parts = new[]
        {
            (new[] { "Walk the", "Feed the" }, new[] { "dog", "cat", "goat" }),
            (new[] { "Do the", "Put away the" }, new[] { "groceries", "dishes", "laundry" }),
            (new[] { "Clean the" }, new[] { "bathroom", "pool", "blinds", "car" })
        };
    // Remaining code omitted for brevity.

See this GitHub issue to report or review issues with Native AOT support in ASP.NET Core.

• Tutorial: Publish an ASP.NET Core app using Native AOT
• Native AOT deployment
• Optimize AOT deployments
• Configuration-binding source generator
• Using the configuration binder source generator
• The minimal API AOT compilation template
• Comparing WebApplication.CreateBuilder to CreateSlimBuilder
• Exploring the new minimal API source generator
• Replacing method calls with Interceptors
• Behind [LogProperties] and the new telemetry logging source generator

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.3