Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://kubernetes.io/docs/tasks/configure-pod-container/create-hostprocess-pod below:

Website Navigation

• Kubernetes

Create a Windows HostProcess Pod

FEATURE STATE: Kubernetes v1.26 [stable]

Windows HostProcess containers enable you to run containerized workloads on a Windows host. These containers operate as normal processes but have access to the host network namespace, storage, and devices when given the appropriate user privileges. HostProcess containers can be used to deploy network plugins, storage configurations, device plugins, kube-proxy, and other components to Windows nodes without the need for dedicated proxies or the direct installation of host services.

Administrative tasks such as installation of security patches, event log collection, and more can be performed without requiring cluster operators to log onto each Windows node. HostProcess containers can run as any user that is available on the host or is in the domain of the host machine, allowing administrators to restrict resource access through user permissions. While neither filesystem or process isolation are supported, a new volume is created on the host upon starting the container to give it a clean and consolidated workspace. HostProcess containers can also be built on top of existing Windows base images and do not inherit the same compatibility requirements as Windows server containers, meaning that the version of the base images does not need to match that of the host. It is, however, recommended that you use the same base image version as your Windows Server container workloads to ensure you do not have any unused images taking up space on the node. HostProcess containers also support volume mounts within the container volume.

• When you need to perform tasks which require the networking namespace of the host. HostProcess containers have access to the host's network interfaces and IP addresses.
• You need access to resources on the host such as the filesystem, event logs, etc.
• Installation of specific device drivers or Windows services.
• Consolidation of administrative tasks and security policies. This reduces the degree of privileges needed by Windows nodes.

This task guide is specific to Kubernetes v1.33. If you are not running Kubernetes v1.33, check the documentation for that version of Kubernetes.

In Kubernetes 1.33, the HostProcess container feature is enabled by default. The kubelet will communicate with containerd directly by passing the hostprocess flag via CRI. You can use the latest version of containerd (v1.6+) to run HostProcess containers. How to install containerd.

These limitations are relevant for Kubernetes v1.33:

• HostProcess containers require containerd 1.6 or higher container runtime and containerd 1.7 is recommended.
• HostProcess pods can only contain HostProcess containers. This is a current limitation of the Windows OS; non-privileged Windows containers cannot share a vNIC with the host IP namespace.
• HostProcess containers run as a process on the host and do not have any degree of isolation other than resource constraints imposed on the HostProcess user account. Neither filesystem or Hyper-V isolation are supported for HostProcess containers.
• Volume mounts are supported and are mounted under the container volume. See Volume Mounts
• A limited set of host user accounts are available for HostProcess containers by default. See Choosing a User Account.
• Resource limits (disk, memory, cpu count) are supported in the same fashion as processes on the host.
• Both Named pipe mounts and Unix domain sockets are not supported and should instead be accessed via their path on the host (e.g. \\.\pipe\*)

Enabling a Windows HostProcess pod requires setting the right configurations in the pod security configuration. Of the policies defined in the Pod Security Standards HostProcess pods are disallowed by the baseline and restricted policies. It is therefore recommended that HostProcess pods run in alignment with the privileged profile.

When running under the privileged policy, here are the configurations which need to be set to enable the creation of a HostProcess pod:

Windows pods offer the ability to run HostProcess containers which enables privileged access to the Windows node.

Allowed Values

• true

Pods container HostProcess containers must use the host's network namespace.

Allowed Values

• true

Specification of which user the HostProcess container should run as is required for the pod spec.

Allowed Values

• NT AUTHORITY\SYSTEM
• NT AUTHORITY\Local service
• NT AUTHORITY\NetworkService
• Local usergroup names (see below)

Because HostProcess containers have privileged access to the host, the runAsNonRoot field cannot be set to true.

Allowed Values

• Undefined/Nil
• false

spec:
  securityContext:
    windowsOptions:
      hostProcess: true
      runAsUserName: "NT AUTHORITY\\Local service"
  hostNetwork: true
  containers:
  - name: test
    image: image1:latest
    command:
      - ping
      - -t
      - 127.0.0.1
  nodeSelector:
    "kubernetes.io/os": windows

HostProcess containers support the ability to mount volumes within the container volume space. Volume mount behavior differs depending on the version of containerd runtime used by on the node.

Applications running inside the container can access volume mounts directly via relative or absolute paths. An environment variable $CONTAINER_SANDBOX_MOUNT_POINT is set upon container creation and provides the absolute host path to the container volume. Relative paths are based upon the .spec.containers.volumeMounts.mountPath configuration.

To access service account tokens (for example) the following path structures are supported within the container:

• .\var\run\secrets\kubernetes.io\serviceaccount\
• $CONTAINER_SANDBOX_MOUNT_POINT\var\run\secrets\kubernetes.io\serviceaccount\

Applications running inside the container can access volume mounts directly via the volumeMount's specified mountPath (just like Linux and non-HostProcess Windows containers).

For backwards compatibility volumes can also be accessed via using the same relative paths configured by containerd v1.6.

As an example, to access service account tokens within the container you would use one of the following paths:

• c:\var\run\secrets\kubernetes.io\serviceaccount
• /var/run/secrets/kubernetes.io/serviceaccount/
• $CONTAINER_SANDBOX_MOUNT_POINT\var\run\secrets\kubernetes.io\serviceaccount\

Resource limits (disk, memory, cpu count) are applied to the job and are job wide. For example, with a limit of 10MB set, the memory allocated for any HostProcess job object will be capped at 10MB. This is the same behavior as other Windows container types. These limits would be specified the same way they are currently for whatever orchestrator or runtime is being used. The only difference is in the disk resource usage calculation used for resource tracking due to the difference in how HostProcess containers are bootstrapped.

By default, HostProcess containers support the ability to run as one of three supported Windows service accounts:

• LocalSystem
• LocalService
• NetworkService

You should select an appropriate Windows service account for each HostProcess container, aiming to limit the degree of privileges so as to avoid accidental (or even malicious) damage to the host. The LocalSystem service account has the highest level of privilege of the three and should be used only if absolutely necessary. Where possible, use the LocalService service account as it is the least privileged of the three options.

If configured, HostProcess containers can also run as local user accounts which allows for node operators to give fine-grained access to workloads.

To run HostProcess containers as a local user; A local usergroup must first be created on the node and the name of that local usergroup must be specified in the runAsUserName field in the deployment. Prior to initializing the HostProcess container, a new ephemeral local user account to be created and joined to the specified usergroup, from which the container is run. This provides a number a benefits including eliminating the need to manage passwords for local user accounts. An initial HostProcess container running as a service account can be used to prepare the user groups for later HostProcess containers.

Example:

1. Create a local user group on the node (this can be done in another HostProcess container).

   net localgroup hpc-localgroup /add
   

2. Grant access to desired resources on the node to the local usergroup. This can be done with tools like icacls.

3. Set runAsUserName to the name of the local usergroup for the pod or individual containers.

   securityContext:
     windowsOptions:
       hostProcess: true
       runAsUserName: hpc-localgroup
   

4. Schedule the pod!

HostProcess containers can be built from any of the existing Windows Container base images.

Additionally a new base mage has been created just for HostProcess containers! For more information please check out the windows-host-process-containers-base-image github project.

• HostProcess containers fail to start with failed to create user process token: failed to logon user: Access is denied.: unknown

  Ensure containerd is running as LocalSystem or LocalService service accounts. User accounts (even Administrator accounts) do not have permissions to create logon tokens for any of the supported user accounts.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4