Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://github.com/stm32duino/Arduino_Core_STM32/wiki/LPS22HB below:

LPS22HB · stm32duino/Arduino_Core_STM32 Wiki · GitHub

Arduino library to support the LPS22HB 260-1260 hPa absolute digital output barometer.

• LPS22HBSensor(TwoWire*, uint8_t): class constructor
  Params pointer to the I2C instance
  Params (optional) address of the component's instance

• Enable: enable sensor
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• Disable: disable sensor
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• ReadID(uint8_t*): read ID address
  Params pointer where store the ID of the device
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• Reset: reboot memory content
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• GetPressure(float*): read output register and calculate the pressure in mbar Params pointer where to store data
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• GetTemperature(float*): read output register and calculate the temperature Params pointer where to store data
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• GetODR(float*): get the output data rate mode
  Params pointer where to store data
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• SetODR(float): set the output data rate mode
  Params data rate to be set
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• ReadReg(uint8_t, uint8_t*): read data from register
  Params register address
  Params pointer to register data
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

• WriteReg(uint8_t, uint8_t): write data to register
  Params register address
  Params register data
  Returns LPS22HB_STATUS_OK in case of success, an error code otherwise

Note

This library uses the Wire library presents in the STM32 core by default.

• DISCO_IOT_LPS22HB_DataLog_Terminal: reads pressure and temperature values and prints them.

You can find the source files at
https://github.com/stm32duino/LPS22HB

The LPS22HB datasheet is available at
http://www.st.com/content/st_com/en/products/mems-and-sensors/pressure-sensors/lps22hb.html

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4