Hi, I'm coming back to the issue I have:
I have attached a Discovery board and a DIYMORE https://stm32-base.org/boards/STM32F407VGT6-diymore.html to the SWD-Interface.
$ ./st-info --version
Failed to parse flash type or unrecognized flash type
v1.7.0-186-gc4762e6
No clue for days now why the target isn't recognized. Connected SWCLK to PA14, SWDIO to PA13, Vcc externally powered.
Help greatly appreciated.
EDIT: False Alarm! Issue solved. It was hardware. Bad Berg connector crimping spot. Sorry for bothering.
$ ./st-info --probe
Failed to parse flash type or unrecognized flash type
detected chip_id parametres
# Device Type: STM32F4x5_F4x7
# Reference Manual: RM0090 // RM0090 (Rev. 2)
#
chip_id 0x413
flash_type 3
flash_size_reg 0x1fff7a22
flash_pagesize 0x4000
sram_size 0x30000
bootrom_base 0x1fff0000
bootrom_size 0x7800
option_base 0x40023c14
option_size 0x4
flags 2
Found 1 stlink programmers
version: V2J37S27
serial: 0670FF505252836684442833
flash: 1048576 (pagesize: 16384)
sram: 196608
chipid: 0x413
detected chip_id parametres
# Device Type: STM32F4x5_F4x7
# Reference Manual: RM0090 // RM0090 (Rev. 2)
#
chip_id 0x413
flash_type 3
flash_size_reg 0x1fff7a22
flash_pagesize 0x4000
sram_size 0x30000
bootrom_base 0x1fff0000
bootrom_size 0x7800
option_base 0x40023c14
option_size 0x4
flags 2
dev-type: STM32F4x5_F4x7
Nonetheless I'm wondering about the initial Failed to parse flash type or unrecognized flash type
Does it refer to the STLINK host?
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4