Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://github.com/sparkfun/SparkFun_RTK_Firmware_Uploader/releases below:

Releases · sparkfun/SparkFun_RTK_Firmware_Uploader · GitHub

Releases · sparkfun/SparkFun_RTK_Firmware_Uploader

This release:

• Adds support for the ESP32 Pico Mini (8MB Flash) as used on the new RTK Postcard
• The code will now upload:
  • RTK_Surveyor.ino.bootloader.bin when uploading RTK (Surveyor) Firmware (created with v2..0.2 of the core)
  • RTK_Everywhere.ino.bootloader.bin when uploading RTK Everywhere Firmware (created with v3.0.7 of the core)
• There is a new dedicated partitions file for 8MB devices
• The Actions workflows have been updated to the latest versions of upload-artifact etc.
• The Actions workflows run pyinstaller under Python 3.12, updated from 3.10
• esptool is v4.8.1

This release:

• Limits the baud rate to 460800 on CH342 interfaces - resolves #4
  • Note: the baud rate is also limited to 460800 on Darwin (MacOS) platforms
• Adds a Erase Flash option under the Extras pull-down menu - resolves #5
• Adds a Read WiFi MAC option under the Extras pull-down menu - resolves #6
• Moves the Reset ESP32 button to the Extras pull-down menu

This release includes the following changes:

• The GUI now uses the latest version of esptool - allowing it to run correctly on Linux
  • The built-in copy of esptool v3.3 has been removed
  • The release build workflow installs the latest version of esptool; pyinstaller builds it into the executables. The stub_flasher json files are added automatically.
  • v1.6.0 of the GUI is built with v4.7.0 of esptool
• The maximum baud rate is limited to 460800 on MacOS. (921600 fails on Mac Mini.)

This release:

• Changes the reset strategy - for the Facet
• There are occasions where the Facet can become stuck in the ESP32 bootloader after a successful firmware upload
• After the firmware upload, the GUI attempts a 'normal' reset via esptool
• If the normal reset is unsuccessful, the user can manually perform a TeraTerm-like reset by clicking the Reset ESP32 button
  • This toggles the RTS and DTR lines manually (using PySerial) to duplicate the reset generated by TeraTerm

In this release:

• The port list is automatically updated when the COM Port combo box is clicked
  • This change made the Refresh button redundant - it has been removed

• First full release with Linux, MacOS, Windows and Python installers / executables
• The Uploader now resets the ESP32 automatically after uploading new firmware

You can’t perform that action at this time.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4