RPresto is a DBI-based adapter for the open source distributed SQL query engine Presto for running interactive analytic queries.
RPresto is both on CRAN and github.
For the CRAN version, you can use
install.packages("RPresto")
You can install the development version of RPresto from GitHub with:
# install.packages("devtools")
devtools::install_github("prestodb/RPresto")
The following examples assume that you have a in-memory Presto server set up locally. It’s the simplest server which stores all data and metadata in RAM on workers and both are discarded when Presto restarts. If you don’t have one set up, please refer to the memory connector documentation.
# Load libaries and connect to Presto
library(RPresto)
library(DBI)
con <- DBI::dbConnect(
drv = RPresto::Presto(),
host = "http://localhost",
port = 8080,
user = Sys.getenv("USER"),
catalog = "memory",
schema = "default"
)
There are two levels of APIs: DBI and dplyr.
The easiest and most flexible way of executing a SELECT query is using a dbGetQuery() call. It returns the query result in a tibble.
DBI::dbGetQuery(con, "SELECT CAST(3.14 AS DOUBLE) AS pi") #> # A tibble: 1 × 1 #> pi #> <dbl> #> 1 3.14
dbWriteTable() can be used to write a small data frame into a Presto table.
# Writing iris data frame into Presto DBI::dbWriteTable(con, "iris", iris)
dbExistsTable() checks if a table exists.
DBI::dbExistsTable(con, "iris") #> [1] TRUE
dbReadTable() reads the entire table into R. It’s essentially a SELECT * query on the table.
DBI::dbReadTable(con, "iris") #> # A tibble: 150 × 5 #> sepal.length sepal.width petal.length petal.width species #> <dbl> <dbl> <dbl> <dbl> <chr> #> 1 5.1 3.5 1.4 0.2 setosa #> 2 4.9 3 1.4 0.2 setosa #> 3 4.7 3.2 1.3 0.2 setosa #> 4 4.6 3.1 1.5 0.2 setosa #> 5 5 3.6 1.4 0.2 setosa #> 6 5.4 3.9 1.7 0.4 setosa #> 7 4.6 3.4 1.4 0.3 setosa #> 8 5 3.4 1.5 0.2 setosa #> 9 4.4 2.9 1.4 0.2 setosa #> 10 4.9 3.1 1.5 0.1 setosa #> # ℹ 140 more rows
dbRemoveTable() drops the table from Presto.
DBI::dbRemoveTable(con, "iris")
You can execute a statement and returns the number of rows affected using dbExecute().
# Create an empty table using CREATE TABLE DBI::dbExecute( con, "CREATE TABLE testing_table (field1 BIGINT, field2 VARCHAR)" ) #> [1] 0
dbExecute() returns the number of rows affected by the statement. Since a CREATE TABLE statement creates an empty table, it returns 0.
DBI::dbExecute( con, "INSERT INTO testing_table VALUES (1, 'abc'), (2, 'xyz')" ) #> [1] 2
Since 2 rows are inserted into the table, it returns 2.
# Check the previous INSERT statment works DBI::dbReadTable(con, "testing_table") #> # A tibble: 2 × 2 #> field1 field2 #> <int> <chr> #> 1 1 abc #> 2 2 xyz
We also include dplyr database backend integration (which is mainly implemented using the dbplyr package).
# Load packages library(dplyr) library(dbplyr)
We can use dplyr::copy_to() to write a local data frame to a PrestoConnection and immediately create a remote table on it.
# Add mtcars to Presto
if (DBI::dbExistsTable(con, "mtcars")) {
DBI::dbRemoveTable(con, "mtcars")
}
tbl.mtcars <- dplyr::copy_to(dest = con, df = mtcars, name = "mtcars")
# colnames() gives the column names
tbl.mtcars %>% colnames()
#> [1] "mpg" "cyl" "disp" "hp" "drat" "wt" "qsec" "vs" "am" "gear"
#> [11] "carb"
dplyr::tbl() also work directly on the PrestoConnection.
# Treat "iris" in Presto as a remote data source that dplyr can now manipulate
if (!DBI::dbExistsTable(con, "iris")) {
DBI::dbWriteTable(con, "iris", iris)
}
tbl.iris <- dplyr::tbl(con, "iris")
tbl.iris %>% colnames()
#> [1] "sepal.length" "sepal.width" "petal.length" "petal.width" "species"
# dplyr verbs can be applied onto the remote data source
tbl.iris %>%
group_by(species) %>%
summarize(
mean_sepal_length = mean(sepal.length, na.rm = TRUE)
) %>%
arrange(species) %>%
collect()
#> # A tibble: 3 × 2
#> species mean_sepal_length
#> <chr> <dbl>
#> 1 setosa 5.01
#> 2 versicolor 5.94
#> 3 virginica 6.59
RPresto’s handling of BIGINT (i.e. 64-bit integers) is similar to other DBI packages (e.g. bigrquery, RPostgres). We provide a bigint argument that users can use in multiple interfaces to specify how they want BIGINT typed data to be translated into R.
The bigint argument takes one of the following 4 possible values.
bigint = "integer" is the default setting. It translates BIGINT to R’s native integer type (i.e. 32-bit integer). The range of 32-bit integer is [-2,147,483,648, 2,147,483,647] which should cover most integer use cases.
In case that you need to represent integer values outside of the 32-bit integer range, you have 2 options: bigint = "numeric" which translates the number into a double floating-point type in R; and bigint = "integer64" which packages the number using the bit64::integer64 class. Note that both of those two approaches actually the same precision-preservation range: +/-(2^53-1) = +/-9,007,199,254,740,991, due to the fact that the Presto REST API uses JSON to encode the number and JSON has a limit at 53 bits (rather than 64 bits).
bigint = "character" casts the number into a string. This is most useful when BIGINT is used to represent an ID rather than a real arithmetic number.
The DBI interface function dbGetQuery() is the most fundamental interface whereby bigint can be specified. All other interfaces are either built on top of dbGetQuery() or only take effect when used with dbGetQuery().
# BIGINT within the 32-bit integer range is simply translated into integer DBI::dbGetQuery(con, "SELECT CAST(1 AS BIGINT) AS small_bigint") #> # A tibble: 1 × 1 #> small_bigint #> <int> #> 1 1 # BIGINT outside of the 32-bit integer range generates a warning and returns NA # when bigint is not specified DBI::dbGetQuery(con, "SELECT CAST(POW(2, 31) AS BIGINT) AS overflow_bigint") #> Warning in as.integer.integer64(x): NAs produced by integer overflow #> # A tibble: 1 × 1 #> overflow_bigint #> <int> #> 1 NA # Using bigint to specify numeric or integer64 translations DBI::dbGetQuery( con, "SELECT CAST(POW(2, 31) AS BIGINT) AS bigint_numeric", bigint = "numeric" ) #> # A tibble: 1 × 1 #> bigint_numeric #> <dbl> #> 1 2147483648 DBI::dbGetQuery( con, "SELECT CAST(POW(2, 31) AS BIGINT) AS bigint_integer64", bigint = "integer64" ) #> # A tibble: 1 × 1 #> bigint_integer64 #> <int64> #> 1 2147483648
When used with the dplyr interface, bigint can be specified in two places.
bigint argument to dbConnect() when creating the PrestoConnection. All queries that use the connection later will use the specified bigint setting.con.bigint <- DBI::dbConnect(
drv = RPresto::Presto(),
host = "http://localhost",
port = 8080,
user = Sys.getenv("USER"),
catalog = "memory",
schema = "default",
# bigint can be specified in dbConnect
bigint = "integer64"
)
# BIGINT outside of the 32-bit integer range is automatically translated to
# integer64, per the connection setting earlier
DBI::dbGetQuery(
con.bigint, "SELECT CAST(POW(2, 31) AS BIGINT) AS bigint_integer64"
)
#> # A tibble: 1 × 1
#> bigint_integer64
#> <int64>
#> 1 2147483648
bigint for a particular query when using the dplyr interface without affecting other queries, you can pass bigint to the collect() call.tbl.bigint <- dplyr::tbl(
con, sql("SELECT CAST(POW(2, 31) AS BIGINT) AS bigint")
)
# Default collect() generates a warning and returns NA
dplyr::collect(tbl.bigint)
#> Warning in as.integer.integer64(x): NAs produced by integer overflow
#> # A tibble: 1 × 1
#> bigint
#> <int>
#> 1 NA
# Passing bigint to collect() specifies BIGINT treatment
dplyr::collect(tbl.bigint, bigint = "integer64")
#> # A tibble: 1 × 1
#> bigint
#> <int64>
#> 1 2147483648
To connect to Trino you must set the use.trino.headers parameter so RPresto knows to send the correct headers to the server. Otherwise all the same functionality is supported.
con.trino <- DBI::dbConnect(
RPresto::Presto(),
use.trino.headers = TRUE,
host = "http://localhost",
port = 8080,
user = Sys.getenv("USER"),
schema = "<schema>",
catalog = "<catalog>",
source = "<source>"
) Passing extra credentials to the connector
To pass extraCredentials that gets added to the X-Presto-Extra-Credential header use the extra.credentials parameter so RPresto will add that to the header while creating the PrestoConnection.
Set use.trino.headers if you want to pass extraCredentials through the X-Trino-Extra-Credential header.
con <- DBI::dbConnect(
RPresto::Presto(),
host = "http://localhost",
port = 7777,
user = Sys.getenv("USER"),
schema = "<schema>",
catalog = "<catalog>",
source = "<source>",
extra.credentials = "test.token.foo=bar",
) Use RPresto with Kerberos
Assuming that you have Kerberos already set up with the Presto coordinator, you can use RPresto with Kerberos by passing a Kerberos config header to the request.config argument of dbConnect(). We provide a convenient wrapper kerberos_configs() to further simplify the workflow.
con <- DBI::dbConnect(
RPresto::Presto(),
host = "http://localhost",
port = 7777,
user = Sys.getenv("USER"),
schema = "<schema>",
catalog = "<catalog>",
source = "<source>",
request.config = kerberos_configs()
)
Presto exposes its interface via a REST based API1. We utilize the httr package to make the API calls and use jsonlite to reshape the data into a tibble.
RPresto has been tested on Presto 0.100.
RPresto is BSD-licensed.
See https://github.com/prestodb/presto/wiki/HTTP-Protocol for a description of the API. ↩
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4