Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://github.com/espressif/openocd-esp32/issues/188 below:

Application Level Tracing fails on ESP32C3 (OCD-429) · Issue #188 · espressif/openocd-esp32 · GitHub

• Development Kit: ESP32-C3-DevkitM-1
• Module or chip used: ESP32-C3
• Debug Adapter: ESP-PROG
• OpenOCD version: v0.10.0-esp32-20210902
• Operating System: Linux
• Using an IDE?: No IDE
• OpenOCD command line: openocd -f interface/ftdi/esp32_devkitj_v1.cfg -f target/esp32c3.cfg
• JTAG Clock: 20000 kHz
• ESP-IDF version: v4.4

Steps to reproduce the behavior:

1. Download esp-idf/examples/network/simple_sniffer/
2. idf.py menuconfig
3. Select Component config -> Application Lelvel Tracing -> Data Destination -> Trace memory
4. idf.py flash
5. idf.py openocd
6. telnet localhost 4444
7. esp apptrace start file://sniffer-esp32.pcap 1 -1 20
8. Error

Executing action: openocd
Note: OpenOCD cfg not found (via env variable OPENOCD_COMMANDS nor as a --openocd-commands argument)
OpenOCD arguments default to: "-f interface/ftdi/esp32_devkitj_v1.cfg -f target/esp32c3.cfg"
OpenOCD started as a background task 119496
Executing action: post_debug
Open On-Chip Debugger v0.10.0-esp32-20210902 (2021-09-02-09:38)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 20000 kHz

Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
Info : clock speed 20000 kHz
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : datacount=2 progbufsize=16
Info : Examined RISC-V core; found 1 harts
Info : hart 0: XLEN=32, misa=0x40101104
Info : Listening on port 3333 for gdb connections
Info : accepting 'telnet' connection on tcp/4444
Error: Failed to get max trace block size!
Error: Failed to init cmd ctx (-4)!

OpenOCD Apptrace is supposed to stream a file via JTAG

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4