Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://github.com/espressif/arduino-esp32/issues/10283 below:

ESP32S3-WROOM-2-32R8 and Arduino IDE Debugger · Issue #10283 · espressif/arduino-esp32 · GitHub

ESP32-S3-DevKitC-1-N-32R8V

ESP32-S3-DevKitC with only USB serial cable attached.

n/a other than onboard RGB used in sketch.

v3.0.4

Arduino IDE 2.3.2

Win 11

80

yes

921600

Debugger fails memory scan and fails to attach.
ESP32-S3-DevKitC-1-N-32R8V, fails
Custom PCB with 32R8V, fails
Tested same simple blink code with Pico-Mini DevKit, Success
Test on ESP32-S3 module with 16MB, Success

Any, but using the RMTWriteNeoPixel.ino as a test.

Open On-Chip Debugger v0.12.0-esp32-20240318 (2024-03-18-18:26)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
CDRTOSConfigure
Info : only one transport option; autoselecting 'jtag'
Info : esp_usb_jtag: VID set to 0x303a and PID to 0x1001
Info : esp_usb_jtag: capabilities descriptor set to 0x2000
Info : Listening on port 50001 for tcl connections
Info : Listening on port 50002 for telnet connections
Info : esp_usb_jtag: serial (7C:DF:A1:E4:45:E0)
Info : esp_usb_jtag: Device found. Base speed 40000KHz, div range 1 to 255
Info : clock speed 40000 kHz
Info : JTAG tap: esp32s3.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32s3.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : [esp32s3.cpu0] Examination succeed
Info : [esp32s3.cpu1] Examination succeed
Info : starting gdb server for esp32s3.cpu0 on 50000
Info : Listening on port 50000 for gdb connections
Info : [esp32s3.cpu0] Target halted, PC=0x4037BBCE, debug_reason=00000001
Info : [esp32s3.cpu0] Reset cause (21) - (USB UART reset)
Info : Set GDB target to 'esp32s3.cpu0'
Info : [esp32s3.cpu1] Target halted, PC=0x4205F8AC, debug_reason=00000000
Info : [esp32s3.cpu1] Reset cause (21) - (USB UART reset)
Info : accepting 'gdb' connection on tcp/50000
Warn : No symbols for FreeRTOS!
Info : [esp32s3.cpu0] Target halted, PC=0x4038E452, debug_reason=00000001
Warn : Failed to get flash maps (-1)!
Warn : Failed to get flash mappings (-4)!
Info : [esp32s3.cpu0] Target halted, PC=0x4038E452, debug_reason=00000001
Error: Failed to get flash size!
Info : [esp32s3.cpu0] Target halted, PC=0x4038E452, debug_reason=00000001
Error: Failed to get flash size!
Error: Failed to probe flash, size 0 KB
Error: auto_probe failed
Error: Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect, or use 'gdb_memory_map disable'.
Error: attempted 'gdb' connection rejected

No response

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4