A RetroSearch Logo

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Search Query:

Showing content from https://github.com/Zanduino/MCP7940 below:

Zanduino/MCP7940: Arduino Library to access the MCP7940M, MCP7940N and MCP7940x Real-Time chips

Arduino library for accessing the Microchip MCP7940 real time clock. There are two versions of the RTC, MCP7940M and MCP7940N, which differ only in that the MCP7940N has a battery backup supply pin and keeps the clock running on power failure. The MCP7940N also has additional registers which store the timepoint of power failure and point in time when power was restored. In addition there are 3 more RTC chips, the MCP79400, MCP79401 and MCP79402 which are backwards compatible but include a special EEPROM storage for EUI address and these are also supported by this library

The MCP7940M, MCP7940N and MCP7940x datasheets describe the chip in detail. While there is no breakout board available for this RTC at the present time, it is not difficult to build into a project. The MCP7940 is available as a PDIP 8 pin which allows for easy use on a breadboard and the only additional parts necessary are a 32.768kHz crystal with 2 small capacitors (~6pF, depends upon circuit capacitance) and some pull-up resistors for the I2C data lines as well as for the multifunction pin, if that is to be used.

Apart from performing as a real-time clock, the MCP4790 has 64 Bytes of SRAM storage available and features 2 separate alarms that can be set to be recurring or a single use. The alarm state can be checked using library functions or can pull down the the MFP (multi-function pin) for a hardware interrupt or other action. The MCP7940 allows for software trimming and the library has functions which support fine-tuning the RTC to increase accuracy.

A detailed library description along with further details are available at the GitHub MCP7940 Wiki. This includes wiring information and sample sketches that illustrate the library and it's functionality.

Several example sketches exist and are documented on the Wiki pages

The library and example programs have Doxygen documentation, whose output can be found at Doxygen Documentation

The following configurations have been compiled and/or tested. Travis-CI is used for automated continuous integration and testing.

Name Tested CPU Comments Arduino UNO Yes ATMega328P Arduino Mega Yes ATMega 2560 Arduino Micro Yes ATMega32U4 Arduino 1280 Yes ATMega1280 Arduino 328 Yes ATMega328 Arduino 168 Yes ATMega168


RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4