Showing content from https://github.com/Microsoft/diskspd/releases below:
Releases · microsoft/diskspd · GitHub
Releases: microsoft/diskspd
Releases · microsoft/diskspd
DISKSPD 2.2
NOTE: changes to the asynchronous IO loop will require rebaselining results with queue depths greater than 1.
The new design drains the completion queue more aggressively, shrinking delays that impacted latency measurement
especially on faster storage targeting higher queue depths. Latency measurement is improved at a very small cost
to rates, as well as improving rates when latency measurement is not used (-D or -L) due to batch dequeue.
Smaller IO sizes will see the most change.
- New: Socket, NUMA, Core and Power Efficiency Class (big/little cores) added to processor topology reporting (XML and text output)
- topology elements only displayed in text results when > 1 are present (e.g. multi-socket systems)
- CPU numbering remains group relative, as is the new Core numbering
- highest Power Efficiency Class is marked with a
P suffix (this will usually be 1P v. 0)
- NOTE: efficiency classes can have major impact; work on heterogenous systems must be aware of core properties in combination with thread affinity rules (see
-a and -n )
- New: active power scheme reporting
- New: base target offset switch now allows range specification:
-Bbase[:length]; replaces -B and -f
- post-run latency histogram processing now significantly faster
- verbose output is more consistent; includes actual warmup, measured and cooldown intervals v. expected
Binary release supports down to Windows 8 and Windows Server 2012; now uses the Universal CRT.
DISKSPD 2.1
- New
-g<n>i form allowing throughput limit specification in units of IOPS (per specified blocksize)
- New
-rs<pct> to specify mixed random/sequential operation (pct random); geometric distribution of run lengths
- New
-rd<distribution> to specify non-uniform IO distributions across target
pct by target percentageabs by absolute offset
- New
-Rp<text|xml> to show specified parameter set in indicated profile output form; works with -X XML profiles and conventional command line
- XML results/profiles are now indented for ease of review
- Text result output updates
- now shows values in size units (K/M/G, and now TiB) to two decimals
- thread stride no longer shown unless specified
- -F/-O threadpool parameters shown
- XML profiles can now be built more generically
- XML profiles can be stated in terms of templated target names (*1, *2), replaced in order from command line invocation
- the command line now allows options alongside -X: -v, -z, -R and -W/-d/-C along with template target specs
DISKSPD 2.0.21a
DISKSPD 2.0.21a 9/21/2018
- Added support for memory mapped I/O:
- New
-Sm option to enable memory mapped I/O
- New
-N<vni> option to specify flush options for memory mapped I/O
- Added support for providing Event Tracing for Windows (ETW) events
- Included a Windows Performance Recorder (WPR) profile to enable ETW tracing
- Added system information to the ResultParser output
DISKSPD 2.0.20a
DISKSPD 2.0.20a 2/28/2018
- Changes that may require rebaselining of results:
- New random number generator that may show an observable decreased cost
- Switched to 512-byte aligned buffers with the -Z option to increase performance
- New -O option for specifying the number of outstanding IO requests per thread
- New -Zr option for per-IO randomization of write buffer content
- XML: Adds a new
<ThreadTarget> element to support target weighting schemes
- Enhanced statistics captured from IOPS data
- Added support for validating XML profiles using an in-built XSD
- Added support for handling RAW volumes
- Updated CPU statistics to work on > 64-core systems
- Updated calculation and accuracy of CPU statistics
- Re-enable support for ETW statistics
You can’t perform that action at this time.
RetroSearch is an open source project built by @garambo
| Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4