RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://docs.nginx.com/nginx/admin-guide/security-controls/terminating-ssl-http/ below:

NGINX SSL Termination | NGINX Documentation

NGINX SSL Termination

This section describes how to configure an HTTPS server on NGINX and F5 NGINX Plus.

Setting up an HTTPS Server

To set up an HTTPS server, in your nginx.conf file include the ssl parameter to the listen directive in the server block, then specify the locations of the server certificate and private key files:

nginx

server {
    listen              443 ssl;
    server_name         www.example.com;
    ssl_certificate     www.example.com.crt;
    ssl_certificate_key www.example.com.key;
    ssl_protocols       TLSv1.2 TLSv1.3;
    ssl_ciphers         HIGH:!aNULL:!MD5;
    #...
}

server {
    listen              443 ssl;
    server_name         www.example.com;
    ssl_certificate     www.example.com.crt;
    ssl_certificate_key www.example.com.key;
    ssl_protocols       TLSv1.2 TLSv1.3;
    ssl_ciphers         HIGH:!aNULL:!MD5;
    #...
}

The server certificate is a public entity. It is sent to every client that connects to the NGINX or NGINX Plus server. The private key is a secure entity and should be stored in a file with restricted access. However, the NGINX master process must be able to read this file. Alternatively, the private key can be stored in the same file as the certificate:

nginx

ssl_certificate     www.example.com.cert;
ssl_certificate_key www.example.com.cert;

ssl_certificate     www.example.com.cert;
ssl_certificate_key www.example.com.cert;

In this case it is important to restrict access to the file. Note that although the certificate and the key are stored in one file in this case, only the certificate is sent to clients.

The ssl_protocols and ssl_ciphers directives can be used to require that clients use only the strong versions and ciphers of SSL/TLS when establishing connections.

Since version 1.23.4, NGINX uses these defaults:

nginx

ssl_protocols TLSv1.2 TLSv1.3;
ssl_ciphers   HIGH:!aNULL:!MD5;

ssl_protocols TLSv1.2 TLSv1.3;
ssl_ciphers   HIGH:!aNULL:!MD5;

Vulnerabilities are sometimes found in the design of older ciphers, and we recommend disabling them in a modern NGINX configuration (unfortunately, the default configuration cannot easily be changed because of backward compatibility for existing NGINX deployments). Please note that CBC-mode ciphers might be vulnerable to a number of attacks (the BEAST attack in particular as described in CVE-2011-3389), and we recommend not using SSLv3 due to the POODLE attack, unless you need to support legacy clients.

OCSP Validation of Client Certificates

NGINX can be configured to use Online Certificate Status Protocol (OCSP) to check the validity of X.509 client certificates as they are presented. An OCSP request for the client certificate status is sent to an OCSP responder which checks the certificate validity and returns the response with the certificate status:

Good - the certificate is not revoked
Revoked - the certificate is revoked
Unknown - no information is available about the client certificate

To enable OCSP validation of SSL client certificates, specify the ssl_ocsp directive along with the ssl_verify_client directive, which enables certificate verification:

nginx

server {
    listen 443 ssl;

    ssl_certificate     /etc/ssl/foo.example.com.crt;
    ssl_certificate_key /etc/ssl/foo.example.com.key;

    ssl_verify_client       on;
    ssl_trusted_certificate /etc/ssl/cachain.pem;
    ssl_ocsp                on; # Enable OCSP validation

    #...
}

server {
    listen 443 ssl;

    ssl_certificate     /etc/ssl/foo.example.com.crt;
    ssl_certificate_key /etc/ssl/foo.example.com.key;

    ssl_verify_client       on;
    ssl_trusted_certificate /etc/ssl/cachain.pem;
    ssl_ocsp                on; # Enable OCSP validation

    #...
}

NGINX sends the OCSP request to the OCSP URI embedded in the client certificate unless a different URI is defined with the ssl_ocsp_responder directive. Only http:// OCSP responders are supported:

nginx

#...
ssl_ocsp_responder http://ocsp.example.com/;
#...

#...
ssl_ocsp_responder http://ocsp.example.com/;
#...

To cache OCSP responses in a single memory zone shared by all worker processes, specify the ssl_ocsp_cache directive to define the name and size of the zone. Responses are cached for 1 hour unless the nextUpdatevalue in the OCSP response specifies a different value:

nginx

#...
ssl_ocsp_cache shared:one:10m;
#...

#...
ssl_ocsp_cache shared:one:10m;
#...

The result of the client certificate validation is available in the $ssl_client_verify variable, including the reason for OCSP failure.

HTTPS Server Optimization

SSL operations consume extra CPU resources. The most CPU-intensive operation is the SSL handshake. There are two ways to minimize the number of these operations per client:

Enabling keepalive connections to send several requests via one connection
Reusing SSL session parameters to avoid SSL handshakes for parallel and subsequent connections

Sessions are stored in the SSL session cache shared between worker processes and configured by the ssl_session_cache directive. One megabyte of cache contains about 4000 sessions. The default cache timeout is 5 minutes. This timeout can be increased using the ssl_session_timeout directive. Below is a sample configuration optimized for a multi-core system with 10 megabyte shared session cache:

nginx

worker_processes auto;

http {
    ssl_session_cache   shared:SSL:10m;
    ssl_session_timeout 10m;

    server {
        listen              443 ssl;
        server_name         www.example.com;
        keepalive_timeout   70;

        ssl_certificate     www.example.com.crt;
        ssl_certificate_key www.example.com.key;
        ssl_protocols       TLSv1.2 TLSv1.3;
        ssl_ciphers         HIGH:!aNULL:!MD5;
        #...
    }
}

worker_processes auto;

http {
    ssl_session_cache   shared:SSL:10m;
    ssl_session_timeout 10m;

    server {
        listen              443 ssl;
        server_name         www.example.com;
        keepalive_timeout   70;

        ssl_certificate     www.example.com.crt;
        ssl_certificate_key www.example.com.key;
        ssl_protocols       TLSv1.2 TLSv1.3;
        ssl_ciphers         HIGH:!aNULL:!MD5;
        #...
    }
}

Some browsers may complain about a certificate signed by a well-known certificate authority, while other browsers may accept the certificate without issues. This occurs because the issuing authority has signed the server certificate using an intermediate certificate that is not present in the base of well-known trusted certificate authorities which is distributed in a particular browser. In this case the authority provides a bundle of chained certificates that should be concatenated to the signed server certificate. The server certificate must appear before the chained certificates in the combined file:

cat www.example.com.crt bundle.crt > www.example.com.chained.crt

cat www.example.com.crt bundle.crt > www.example.com.chained.crt

The resulting file should be used in the ssl_certificate directive:

nginx

server {
    listen              443 ssl;
    server_name         www.example.com;
    ssl_certificate     www.example.com.chained.crt;
    ssl_certificate_key www.example.com.key;
    #...
}

server {
    listen              443 ssl;
    server_name         www.example.com;
    ssl_certificate     www.example.com.chained.crt;
    ssl_certificate_key www.example.com.key;
    #...
}

If the server certificate and the bundle have been concatenated in the wrong order, NGINX fails to start and displays the following error message:

SSL_CTX_use_PrivateKey_file(" ... /www.example.com.key") failed
   (SSL: error:0B080074:x509 certificate routines:
    X509_check_private_key:key values mismatch)

SSL_CTX_use_PrivateKey_file(" ... /www.example.com.key") failed
   (SSL: error:0B080074:x509 certificate routines:
    X509_check_private_key:key values mismatch)

The error happens because NGINX has tried to use the private key with the bundleâs first certificate instead of the server certificate.

Browsers usually store intermediate certificates which they receive and are signed by trusted authorities. So actively used browsers may already have the required intermediate certificates and may not complain about a certificate sent without a chained bundle. To ensure the server sends the complete certificate chain the openssl command-line utility may be used:

shell

openssl s_client -connect www.godaddy.com:443
...
Certificate chain
 0 s:/C=US/ST=Arizona/L=Scottsdale/1.3.6.1.4.1.311.60.2.1.3=US
     /1.3.6.1.4.1.311.60.2.1.2=AZ/O=GoDaddy.com, Inc
     /OU=MIS Department/CN=www.GoDaddy.com
     /serialNumber=0796928-7/2.5.4.15=V1.0, Clause 5.(b)
   i:/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc.
     /OU=http://certificates.godaddy.com/repository
     /CN=Go Daddy Secure Certification Authority
     /serialNumber=07969287
 1 s:/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc.
     /OU=http://certificates.godaddy.com/repository
     /CN=Go Daddy Secure Certification Authority
     /serialNumber=07969287
   i:/C=US/O=The Go Daddy Group, Inc.
     /OU=Go Daddy Class 2 Certification Authority
 2 s:/C=US/O=The Go Daddy Group, Inc.
     /OU=Go Daddy Class 2 Certification Authority
   i:/L=ValiCert Validation Network/O=ValiCert, Inc.
     /OU=ValiCert Class 2 Policy Validation Authority
     /CN=http://www.valicert.com//emailAddress=info@valicert.com
...

openssl s_client -connect www.godaddy.com:443
...
Certificate chain
 0 s:/C=US/ST=Arizona/L=Scottsdale/1.3.6.1.4.1.311.60.2.1.3=US
     /1.3.6.1.4.1.311.60.2.1.2=AZ/O=GoDaddy.com, Inc
     /OU=MIS Department/CN=www.GoDaddy.com
     /serialNumber=0796928-7/2.5.4.15=V1.0, Clause 5.(b)
   i:/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc.
     /OU=http://certificates.godaddy.com/repository
     /CN=Go Daddy Secure Certification Authority
     /serialNumber=07969287
 1 s:/C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc.
     /OU=http://certificates.godaddy.com/repository
     /CN=Go Daddy Secure Certification Authority
     /serialNumber=07969287
   i:/C=US/O=The Go Daddy Group, Inc.
     /OU=Go Daddy Class 2 Certification Authority
 2 s:/C=US/O=The Go Daddy Group, Inc.
     /OU=Go Daddy Class 2 Certification Authority
   i:/L=ValiCert Validation Network/O=ValiCert, Inc.
     /OU=ValiCert Class 2 Policy Validation Authority
     /CN=http://www.valicert.com//emailAddress=info@valicert.com
...

In this example the subject (âsâ) of the www.GoDaddy.com server certificate #0 is signed by an issuer (âiâ) which itself is the subject of certificate #1. Certificate #1 is signed by an issuer which itself is the subject of certificate #2. This certificate, however, is signed by the wellâknown issuer ValiCert, Inc. whose certificate is stored in the browsers themselves.

If a certificate bundle has not been added, only the server certificate (#0) is shown.

A Single HTTP/HTTPS Server

It is possible to configure a single server that handles both HTTP and HTTPS requests by placing one listen directive with the ssl parameter and one without in the same virtual server:

nginx

server {
    listen              80;
    listen              443 ssl;
    server_name         www.example.com;
    ssl_certificate     www.example.com.crt;
    ssl_certificate_key www.example.com.key;
    #...
}

server {
    listen              80;
    listen              443 ssl;
    server_name         www.example.com;
    ssl_certificate     www.example.com.crt;
    ssl_certificate_key www.example.com.key;
    #...
}

In NGINX version 0.7.13 and earlier, SSL cannot be enabled selectively for individual listening sockets, as shown above. SSL can only be enabled for the entire server using the ssl directive, making it impossible to set up a single HTTP/HTTPS server. The ssl parameter to the listen directive was added to solve this issue. The ssl directive therefore is deprecated in version 0.7.14 and later.

A common issue arises when two or more HTTPS servers are configured to listen on a single IP address:

nginx

server {
    listen          443 ssl;
    server_name     www.example.com;
    ssl_certificate www.example.com.crt;
    #...
}

server {
    listen          443 ssl;
    server_name     www.example.org;
    ssl_certificate www.example.org.crt;
    #...
}

server {
    listen          443 ssl;
    server_name     www.example.com;
    ssl_certificate www.example.com.crt;
    #...
}

server {
    listen          443 ssl;
    server_name     www.example.org;
    ssl_certificate www.example.org.crt;
    #...
}

With this configuration, a browser receives the default serverâs certificate. In this case, it is www.example.com regardless of the requested server name. This is caused by the behavior of the SSL protocol itself. The SSL connection is established before the browser sends an HTTP request and NGINX does not know the name of the requested server. Therefore, it may only offer the default serverâs certificate.

The best way to solve this issue is to assign a separate IP address to every HTTPS server:

nginx

server {
    listen          192.168.1.1:443 ssl;
    server_name     www.example.com;
    ssl_certificate www.example.com.crt;
    #...
}

server {
    listen          192.168.1.2:443 ssl;
    server_name     www.example.org;
    ssl_certificate www.example.org.crt;
    #...
}

server {
    listen          192.168.1.1:443 ssl;
    server_name     www.example.com;
    ssl_certificate www.example.com.crt;
    #...
}

server {
    listen          192.168.1.2:443 ssl;
    server_name     www.example.org;
    ssl_certificate www.example.org.crt;
    #...
}

Note that there are also some specific proxy settings for HTTPS upstreams (proxy_ssl_ciphers, proxy_ssl_protocols, and proxy_ssl_session_reuse) which can be used for fineâtuning SSL between NGINX and upstream servers. You can read more about these in the HTTP proxy module documentation.

An SSL Certificate With Several Names

There are other ways to share a single IP address among several HTTPS servers. However, all of them have drawbacks. One way is to use a certificate with several names in the SubjectAltName certificate field, for example, www.example.com and www.example.org. However, the length of the SubjectAltName field is limited.

Another way is to use a certificate with a wildcard name, for example, *.example.org. A wildcard certificate secures all subdomains of the specified domain, but only on one level. This certificate matches www.example.org, but does not match example.org or www.sub.example.org. These two methods can also be combined. A certificate may contain exact and wildcard names in the SubjectAltName field. For example, example.org and *.example.org.

It is better to place a certificate file with several names and its private key file at the http level of your configuration so that they inherit the single memory copy across all servers:

nginx

ssl_certificate     common.crt;
ssl_certificate_key common.key;

server {
    listen          443 ssl;
    server_name     www.example.com;
    #...
}

server {
    listen          443 ssl;
    server_name     www.example.org;
    #...
}

ssl_certificate     common.crt;
ssl_certificate_key common.key;

server {
    listen          443 ssl;
    server_name     www.example.com;
    #...
}

server {
    listen          443 ssl;
    server_name     www.example.org;
    #...
}

A more generic solution for running several HTTPS servers on a single IP address is the TLS Server Name Indication (SNI) extension (RFC 6066), which allows a browser to pass a requested server name during the SSL handshake. With this solution, the server will know which certificate it should use for the connection. Although SNI is widely supported by modern browsers, some old browsers may still not include support for it. Major browsers support SNI starting with the following versions:

Chrome 105 (Windows version supports SNI on Vista or higher, too)
Firefox 2.0 and other browsers using Mozilla Platform rv:1.8.1
Microsoft Internet Explorer 7.0 (but only on Windows Vista or higher)
Opera 8.0
Safari 3.2.1 (Windows version supports SNI on Vista or higher)

Only domain names can be passed in SNI. However, some browsers will pass the IP address of the server as its name if a request includes a literal IP address. It is best not to rely on this.

In order to use SNI in NGINX, it must be supported in both the OpenSSL library with which the NGINX binary has been built, as well as the library with which it is being dynamically linked at runtime. OpenSSL supports SNI since the version 0.9.8f if it was built with configuration option --enable-tlsext. Since OpenSSL version 0.9.8j, this option is enabled by default. If NGINX was built with SNI support, NGINX shows the following when run with the -V switch:

shell

nginx -V
...
TLS SNI support enabled
...

nginx -V
...
TLS SNI support enabled
...

However, if the SNI-enabled NGINX is linked dynamically to an OpenSSL library without SNI support, NGINX displays the warning:

NGINX was built with SNI support, however, now it is linked
dynamically to an OpenSSL library which has no tlsext support,
therefore SNI is not available

NGINX was built with SNI support, however, now it is linked
dynamically to an OpenSSL library which has no tlsext support,
therefore SNI is not available

The SNI support status has been shown by the -V switch since versions 0.8.21 and 0.7.62.
The ssl parameter of the listen directive has been supported since version 0.7.14. Prior to version 0.8.21 it could only be specified along with the default parameter.
SNI has been supported since version 0.5.23.
The shared SSL session cache has been supported since version 0.5.6.

Version 1.27.3 and later: the default SSL protocols are TLSv1.2 and TLSv1.3 (if supported by the OpenSSL library). Otherwise, when OpenSSL 1.0.0 or older is used, the default SSL protocols are TLSv1 and TLSv1.1.
Version 1.23.4 and later: the default SSL protocols are TLSv1, TLSv1.1, TLSv1.2, and TLSv1.3 (if supported by the OpenSSL library).
Version 1.9.1 and later: the default SSL protocols are TLSv1, TLSv1.1, and TLSv1.2 (if supported by the OpenSSL library).
From versions 0.7.65 and 0.8.19 and later, the default SSL protocols are SSLv3, TLSv1, TLSv1.1, and TLSv1.2 (if supported by the OpenSSL library).
In versions 0.7.64 and 0.8.18 and earlier, the default SSL protocols are SSLv2, SSLv3, and TLSv1.

In version 1.0.5 and later, the default SSL ciphers are HIGH:!aNULL:!MD5.
In versions 0.7.65 and 0.8.20 and later, the default SSL ciphers are HIGH:!ADH:!MD5.
From version 0.8.19 the default SSL ciphers are ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM.
From version 0.7.64, 0.8.18 and earlier the default SSL ciphers are ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4