Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://docs.espressif.com/projects/esp-at/en/latest/esp32c2/AT_Command_Set/BLE_AT_Commands.html below:

Website Navigation

• ESP-AT User Guide

Bluetooth® Low Energy AT Commands - ESP32-C2

[中文]

• Introduction

• AT+BLEINIT: Bluetooth LE initialization.

• AT+BLEADDR: Query/Set Bluetooth LE device address.

• AT+BLENAME: Query/Set Bluetooth LE device name.

• AT+BLESCANPARAM: Query/Set parameters of Bluetooth LE scanning.

• AT+BLESCAN: Enable Bluetooth LE scanning.

• AT+BLESCANRSPDATA: Set Bluetooth LE scan response.

• AT+BLEADVPARAM: Query/Set parameters of Bluetooth LE advertising.

• AT+BLEADVDATA: Set Bluetooth LE advertising data.

• AT+BLEADVDATAEX: Automatically set Bluetooth LE advertising data.

• AT+BLEADVSTART: Start Bluetooth LE advertising.

• AT+BLEADVSTOP: Stop Bluetooth LE advertising.

• AT+BLECONN: Establish Bluetooth LE connection.

• AT+BLECONNPARAM: Query/Update parameters of Bluetooth LE connection.

• AT+BLEDISCONN: End Bluetooth LE connection.

• AT+BLECFGMTU: Set Bluetooth LE MTU length.

• AT+BLEGATTSSRV: GATTS discovers services.

• AT+BLEGATTSCHAR: GATTS discovers characteristics.

• AT+BLEGATTSNTFY: Notify a client of the value of a characteristic value from the server.

• AT+BLEGATTSIND: Indicate the characteristic value from the server to a client.

• AT+BLEGATTSSETATTR: GATTS sets characteristics.

• AT+BLEGATTCPRIMSRV: Generic Attributes Client (GATTC) discovers primary services.

• AT+BLEGATTCINCLSRV: GATTC discovers included services.

• AT+BLEGATTCCHAR: GATTC discovers characteristics.

• AT+BLEGATTCRD: GATTC reads characteristics.

• AT+BLEGATTCWR: GATTC writes characteristics.

• AT+BLESPPCFG: Query/Set Bluetooth LE SPP parameters.

• AT+BLESPP: Enter Bluetooth LE SPP mode.

• AT+BLESECPARAM: Query/Set Bluetooth LE encryption parameters.

• AT+BLEENC: Initiate Bluetooth LE encryption request.

• AT+BLEKEYREPLY: Reply the key value to the peer device.

• AT+BLECONFREPLY: Reply the confirm value to the peer device in the legacy connection stage.

• AT+BLEENCDEV: Query bonded Bluetooth LE encryption device list.

• AT+BLEENCCLEAR: Clear Bluetooth LE encryption device list.

• AT+BLESETKEY: Set Bluetooth LE static pair key.

• AT+BLUFI: Start or Stop BluFi.

• AT+BLUFINAME: Query/Set BluFi device name.

• AT+BLUFISEND: Send user-customized data over BluFi.

• AT+BLEPERIODICDATA: Set Bluetooth LE periodic advertising data.

• AT+BLEPERIODICSTART: Start Bluetooth LE periodic advertising.

• AT+BLEPERIODICSTOP: Stop Bluetooth LE periodic advertising.

• AT+BLESYNCSTART: Start to synchronize with periodic advertising.

• AT+BLESYNCSTOP: Stop synchronizing with periodic advertising.

• AT+BLEREADPHY: Query the current transmitter PHY.

• AT+BLESETPHY: Set the current transmitter PHY.

Currently, AT firmware for ESP32-C2 supports Bluetooth® Core Specification Version 5.0.

Important

The default ESP32C2-4MB AT firmware supports BluFi functionality, while the ESP32C2-2MB AT firmware does not. The lack of BluFi support in the ESP32C2-2MB AT firmware is due to the insufficient 2 MB flash size to support Wi-Fi, BluFi, and OTA functionality simultaneously.

Important

The default ESP32C2-4MB AT firmware and ESP32C2-2MB AT firmware do not support Bluetooth LE functionality. If you need to support Bluetooth LE functionality, please refer to the Compile ESP-AT Project Locally documentation and choose ESP32C2-2MB-BLE during the environment installation in step 3.

Due to the limited memory of ESP32-C2, Wi-Fi and Bluetooth LE functionalities cannot be supported simultaneously in a single firmware.

Function:

Check the initialization status of Bluetooth LE.

Command:

Response:

If Bluetooth LE is initialized, AT will return:

If Bluetooth LE is not initialized, AT will return:

Function:

Initialize the role of Bluetooth LE.

Command:

Response:

• <init>:

• 0: deinit Bluetooth LE

• 1: client role

• 2: server role

• To achieve better performance, it is recommended to disable SoftAP by sending the AT+CWMODE=0/1 command before using Bluetooth LE function. For more details, please refer to the RF Coexistence documentation.

• Before using other Bluetooth LE AT commands, you should run this command first to trigger the initialization process.

• After the initialization, the Bluetooth LE role cannot be changed unless you run AT+RST to restart the system first and then re-initialize the Bluetooth LE role.

• Before you deinitialize the Bluetooth stack, it is recommended to stop broadcasting, stop scanning, and disconnect all existing connections.

• If Bluetooth LE is initialized, AT+CIPMODE cannot be set to 1.

Function:

Query the Bluetooth LE Random Address.

Command:

Response:

+BLEADDR:<BLE_random_addr>
OK

Function:

Set the Bluetooth LE address type.

Command:

Response:

• <addr_type>:

• 0: Public Address

• 1: Random Address

• A Static Address should meet the following requirements:

• The two most significant bits of the address should be equal to 1.

• At least one bit of the random part of the address should be 0.

• At least one bit of the random part of the address should be 1.

• The configuration changes will be saved in the NVS partition.

AT+BLEADDR=1                        // Set Random Device Address, Private Address

Function:

Query the Bluetooth LE device name.

Command:

Response:

+BLENAME:<device_name>
OK

Function:

Set the Bluetooth LE device name.

Command:

Response:

• <device_name>: the Bluetooth LE device name. The maximum length is 32. Default: “ESP-AT”.

• The configuration changes will be saved in the NVS partition if AT+SYSSTORE=1.

• After setting the device name with this command, it is recommended that you execute the AT+BLEADVDATA command to add the device name into the advertising data.

Function:

Query the parameters of Bluetooth LE scanning.

Command:

Response:

+BLESCANPARAM:<scan_type>,<own_addr_type>,<filter_policy>,<scan_interval>,<scan_window>
OK

Function:

Set the parameters of Bluetooth LE scanning.

Command:

AT+BLESCANPARAM=<scan_type>,<own_addr_type>,<filter_policy>,<scan_interval>,<scan_window>

Response:

• <scan_type>:

• 0: passive scan

• 1: active scan

• <own_addr_type>:

• 0: Public Address

• 1: Random Address

• 2: RPA Public Address

• 3: RPA Random Address

• <filter_policy>:

• 0: BLE_SCAN_FILTER_ALLOW_ALL

• 1: BLE_SCAN_FILTER_ALLOW_ONLY_WLST

• 2: BLE_SCAN_FILTER_ALLOW_UND_RPA_DIR

• 3: BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR

• <scan_interval>: scan interval. It should be more than or equal to the value of <scan_window>. The range of this parameter is [0x0004,0x4000]. The scan interval equals this parameter multiplied by 0.625 ms, so the range for the actual scan interval is [2.5,10240] ms.

• <scan_window>: scan window. It should be less than or equal to the value of <scan_interval>. The range of this parameter is [0x0004,0x4000]. The scan window equals this parameter multiplied by 0.625 ms, so the range for the actual scan window is [2.5,10240] ms.

AT+BLEINIT=1   // Role: client
AT+BLESCANPARAM=0,0,0,100,50

Function:

Enable/disable scanning.

Command:

AT+BLESCAN=<enable>[,<duration>][,<filter_type>,<filter_param>]

Response:

+BLESCAN:<addr>,<rssi>,<adv_data>,<scan_rsp_data>,<addr_type>
OK
+BLESCANDONE

• <enable>:

• 1: enable continuous scanning.

• 0: disable continuous scanning.

• [<duration>]: optional parameter. Unit: second.

• If you want to disable the scanning, this parameter should be omitted.

• If you want to enable the scanning, set a value for this parameter:

  • When you set it to 0, it means that scanning is continuous.

  • When set it to a value other than 0, for example, AT+BLESCAN=1,3, it means that scanning will last for 3 seconds and then stop automatically. The scanning results will be returned.

• [<filter_type>]: filtering option.

• 1: “MAC”.

• 2: “NAME”.

• <filter_param>: filtering parameter showing the remote device MAC address or remote device name.

• <addr>: Bluetooth LE address.

• <rssi>: signal strength.

• <adv_data>: advertising data.

• <scan_rsp_data>: scan response data.

• <addr_type>: the address type of broadcasters.

• The response OK does not necessarily come before the response +BLESCAN:<addr>,<rssi>,<adv_data>,<scan_rsp_data>,<addr_type>. It may be output before +BLESCAN:<addr>,<rssi>,<adv_data>,<scan_rsp_data>,<addr_type> or after it.

• To obtain the scan response data, use the AT+BLESCANPARAM command to set the scan type to active scan (AT+BLESCANPARAM=1,0,0,100,50), and the peer device needs to set the scan_rsp_data.

AT+BLEINIT=1    // Role: client
AT+BLESCAN=1    // start scanning
AT+BLESCAN=0    // stop scanning
AT+BLESCAN=1,3,1,"24:0A:C4:96:E6:88"  // start scanning, filter type is MAC address
AT+BLESCAN=1,3,2,"ESP-AT"  // start scanning, filter type is device name

Function:

Set scan response.

Command:

AT+BLESCANRSPDATA=<scan_rsp_data>

Response:

• <scan_rsp_data>: scan response data is a HEX string. For example, if you want to set the response data to “0x11 0x22 0x33 0x44 0x55”, the command should be AT+BLESCANRSPDATA="1122334455".

AT+BLEINIT=2   // Role: server
AT+BLESCANRSPDATA="1122334455"

Function:

Query the parameters of advertising.

Command:

Response:

+BLEADVPARAM:<adv_int_min>,<adv_int_max>,<adv_type>,<own_addr_type>,<channel_map>,<adv_filter_policy>,<peer_addr_type>,<"peer_addr">,<primary_phy>,<secondary_phy>
OK

Function:

Set the parameters of advertising.

Command:

AT+BLEADVPARAM=<adv_int_min>,<adv_int_max>,<adv_type>,<own_addr_type>,<channel_map>[,<adv_filter_policy>][,<peer_addr_type>,<"peer_addr">][,<primary_phy>,<secondary_phy>]

Response:

• <adv_int_min>: minimum advertising interval. The range of this parameter is [0x0020,0x4000]. The actual advertising interval equals this parameter multiplied by 0.625 ms, so the range for the actual minimum interval is [20, 10240] ms. It should be less than or equal to the value of <adv_int_max>.

• <adv_int_max>: maximum advertising interval. The range of this parameter is [0x0020,0x4000]. The actual advertising interval equals this parameter multiplied by 0.625 ms, so the range for the actual maximum interval is [20, 10240] ms. It should be more than or equal to the value of <adv_int_min>.

• <adv_type>:

• 0: ADV_TYPE_IND

• 1: ADV_TYPE_DIRECT_IND_HIGH

• 2: ADV_TYPE_SCAN_IND

• 3: ADV_TYPE_NONCONN_IND

• 4: ADV_TYPE_DIRECT_IND_LOW

• 5: ADV_TYPE_EXT_NOSCANNABLE_IND

• 6: ADV_TYPE_EXT_CONNECTABLE_IND

• 7: ADV_TYPE_EXT_SCANNABLE_IND

  • When <adv_type> is set to 0-4, the maximum allowed size for advertising data using the AT+BLEADVDATA command is 31 bytes. If the advertising data exceeds the maximum limit of this command, use command AT+BLESCANRSPDATA.

  • When <adv_type> is set to 5-7, the maximum allowed size for advertising data using the AT+BLEADVDATA command is 119 bytes.

• <own_addr_type>: own Bluetooth LE address type.

• 0: BLE_ADDR_TYPE_PUBLIC

• 1: BLE_ADDR_TYPE_RANDOM

• <channel_map>: channel of advertising.

• 1: ADV_CHNL_37

• 2: ADV_CHNL_38

• 4: ADV_CHNL_39

• 7: ADV_CHNL_ALL

• [<adv_filter_policy>]: filter policy of advertising.

• 0: ADV_FILTER_ALLOW_SCAN_ANY_CON_ANY

• 1: ADV_FILTER_ALLOW_SCAN_WLST_CON_ANY

• 2: ADV_FILTER_ALLOW_SCAN_ANY_CON_WLST

• 3: ADV_FILTER_ALLOW_SCAN_WLST_CON_WLST

• [<peer_addr_type>]: remote Bluetooth LE address type.

• 0: PUBLIC

• 1: RANDOM

• [<”peer_addr”>]: remote Bluetooth LE address.

• [<primary_phy>]: advertising primary PHY. Default: 1M PHY.

• [<secondary_phy>]: advertising secondary PHY. Default: 1M PHY.

  • 1: 1M PHY

  • 2: 2M PHY

  • 3: Coded PHY

• If peer_addr is not set, the query result will be all zero.

• The primary_phy and secondary_phy must be set together, otherwise, the default 1M PHY is used for unconfigured parameter.

AT+BLEINIT=2   // Role: server
AT+BLEADVPARAM=50,50,0,0,4,0,1,"12:34:45:78:66:88"
AT+BLEADVPARAM=32,32,6,0,7,0,0,"62:34:45:78:66:88",1,3

Function:

Set advertising data.

Command:

Response:

• <adv_data>: advertising data in HEX string. For example, to set the advertising data to “0x11 0x22 0x33 0x44 0x55”, the command should be AT+BLEADVDATA="1122334455". The maximum length is 119 bytes.

• If advertising data is preset by command AT+BLEADVDATAEX=<dev_name>,<uuid>,<manufacturer_data>,<include_power>, it will be overwritten by this command.

• If you run this command to modify the device name, it is recommended to also execute the AT+BLENAME command to set the same device name afterwards.

• Please set the Bluetooth LE advertising parameters by the AT+BLEADVPARAM command before you use the AT+BLEADVDATA command.

• When the <adv_type> is set to 0-4 by the AT+BLEADVPARAM command, the maximum allowed size for advertising data using the AT+BLEADVDATA command is 31 bytes. If the advertising data exceeds the maximum limit of this command, use command AT+BLESCANRSPDATA.

• When the <adv_type> is set to 5-7 by the AT+BLEADVPARAM command, the maximum allowed size for advertising data using the AT+BLEADVDATA command is 119 bytes.

AT+BLEINIT=2   // Role: server
AT+BLEADVDATA="1122334455"

Function:

Query the parameters of advertising data.

Command:

Response:

+BLEADVDATAEX:<dev_name>,<uuid>,<manufacturer_data>,<include_power>

OK

Function:

Set the advertising data and start advertising.

Command:

AT+BLEADVDATAEX=<dev_name>,<uuid>,<manufacturer_data>,<include_power>

Response:

• <dev_name>: string parameter showing a device name. For example, if you want to set the device name to “just-test”, the command should be AT+BLEADVSTARTEX="just-test",<uuid>,<manufacturer_data>,<include_power>.

• <uuid>: string parameter. For example, if you want to set the UUID to “0xA002”, the command should be AT+BLEADVSTARTEX=<dev_name>,"A002",<manufacturer_data>,<include_power>.

• <manufacturer_data>: manufacturer data in HEX string. For example, if you set the manufacturer data to “0x11 0x22 0x33 0x44 0x55”, the command should be AT+BLEADVSTARTEX=<dev_name>,<uuid>,"1122334455",<include_power>.

• <include_power>: If you need to include the TX power in the advertising data, you should set the parameter to 1. Otherwise, set it to 0.

• If advertising data is preset by command AT+BLEADVDATA=<adv_data>, it will be overwritten by this command.

• This command automatically changes the adv type previously set using AT+BLEADVPARAM to 0.

AT+BLEINIT=2   // Role: server
AT+BLEADVDATAEX="ESP-AT","A002","0102030405",1

Function:

Start advertising.

Command:

Response:

• You must set the advertisement parameters using the AT+BLEADVPARAM=<adv_parameter> command before advertisement is started.

• If advertising data is NOT set by command AT+BLEADVDATA=<adv_data>, the advertising playload will be empty.

• If advertising data is preset by command AT+BLEADVDATA=<adv_data>, it will be overwritten by AT+BLEADVDATAEX=<dev_name>,<uuid>,<manufacturer_data>,<include_power> and vice versa.

• After the start of Bluetooth LE advertisement, if no connection is established, the advertisement will keep going on; if a connection is established, the advertisement will automatically end.

AT+BLEINIT=2   // Role: server
AT+BLEADVPARAM=50,50,0,0,7,0,,
AT+BLEADVSTART

Function:

Stop advertising.

Command:

Response:

• After the start of advertising, if the Bluetooth LE connection is established successfully, it will stop advertising automatically. In such a case, this command does NOT need to be called.

AT+BLEINIT=2   // Role: server
AT+BLEADVPARAM=50,50,0,0,7,0,,
AT+BLEADVSTART
AT+BLEADVSTOP

Function:

Query the Bluetooth LE connection.

Command:

Response:

+BLECONN:<conn_index>,<remote_address>
OK

If the connection has not been established, there will be no <conn_index> and <remote_address> in the response.

Function:

Establish the Bluetooth LE connection.

Command:

AT+BLECONN=<conn_index>,<remote_address>[,<addr_type>,<timeout>]

Response:

If the connection is established successfully, it will prompt:

+BLECONN:<conn_index>,<remote_address>

OK

If the connection fails, it will prompt:

+BLECONN:<conn_index>,-1

ERROR

If the connection fails due to parameters error or other reasons, it will prompt:

• <conn_index>: index of Bluetooth LE connection. Range: [0,1].

• <remote_address>: remote Bluetooth LE address.

• [<addr_type>]: the address type of broadcasters:

  • 0: Public Address

  • 1: Random Address

• [<timeout>]: the timeout for the connection command. Unit: second. Range: [3,30].

• It is recommended to scan devices by running AT+BLESCAN before initiating a new connection to ensure that the target device is in the broadcast state.

• The maximum timeout for connection is 30 seconds.

• If the Bluetooth LE server is initialized and the connection is established successfully, you can use this command to discover the services in the peer device (GATTC). The following GATTC commands can also be used:

• AT+BLEGATTCPRIMSRV

• AT+BLEGATTCINCLSRV

• AT+BLEGATTCCHAR

• AT+BLEGATTCRD

• AT+BLEGATTCWR

• AT+BLEGATTSIND

• If the AT+BLECONN? is executed when the Bluetooth LE is not initialized (AT+BLEINIT=0), the system will not output +BLECONN:<conn_index>,<remote_address> .

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:0a:c4:09:34:23",0,10

Function:

Query the parameters of Bluetooth LE connection.

Command:

Response:

+BLECONNPARAM:<conn_index>,<min_interval>,<max_interval>,<cur_interval>,<latency>,<timeout>
OK

Function:

Update the parameters of Bluetooth LE connection.

Command:

AT+BLECONNPARAM=<conn_index>,<min_interval>,<max_interval>,<latency>,<timeout>

Response:

If the setting fails, it will prompt the message below:

+BLECONNPARAM: <conn_index>,-1

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <min_interval>: minimum connecting interval. It should be less than or equal to the value of <max_interval>. The range of this parameter is [0x0006,0x0C80]. The actual connecting interval equals this parameter multiplied by 1.25 ms, so the range for the actual minimum interval is [7.5,4000] ms.

• <max_interval>: maximum connecting interval. It should be more than or equal to the value of <min_interval>. The range of this parameter is [0x0006,0x0C80]. The actual connecting interval equals this parameter multiplied by 1.25 ms, so the range for the actual maximum interval is [7.5,4000] ms.

• <cur_interval>: current connecting interval.

• <latency>: latency. Range: [0x0000,0x01F3].

• <timeout>: timeout. The range of this parameter is [0x000A,0x0C80]. The actual timeout equals this parameter multiplied by 10 ms, so the range for the actual timeout is [100,32000] ms.

• This command supports client or server roles when updating its connection parameters. Of course, the connection has to be established first.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:0a:c4:09:34:23"
AT+BLECONNPARAM=0,12,14,1,500

Function:

End the Bluetooth LE connection.

Command:

AT+BLEDISCONN=<conn_index>

Response:

OK  // The AT+BLEDISCONN command is received.
+BLEDISCONN:<conn_index>,<remote_address>  // The command is successful.

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <remote_address>: remote Bluetooth LE address.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:0a:c4:09:34:23"
AT+BLEDISCONN=0

Function:

Query the length of the maximum transmission unit (MTU).

Command:

Response:

+BLECFGMTU:<conn_index>,<mtu_size>
OK

Function:

Set the length of the maximum transmission unit (MTU).

Command:

AT+BLECFGMTU=<conn_index>

Response:

OK  // The command is received.

-  **<conn_index>**: index of Bluetooth LE connection. Range: [0,1].

-  Bluetooth LE connection has to be established first.
-  Only the client can call this command to set the length of MTU.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:0a:c4:09:34:23"
AT+BLECFGMTU=0

Function:

GATTS discovers services.

Command:

Response:

+BLEGATTSSRV:<srv_index>,<start>,<srv_uuid>,<srv_type>
OK

• <srv_index>: service’s index starting from 1.

• <start>:

• 0: the service has not started.

• 1: the service has already started.

• <srv_uuid>: service’s UUID.

• <srv_type>: service’s type.

• 0: not primary service.

• 1: primary service.

AT+BLEINIT=2   // Role: server
AT+BLEGATTSSRV?

Function:

GATTS discovers characteristics.

Command:

Response:

The response for a characteristic:

+BLEGATTSCHAR:"char",<srv_index>,<char_index>,<char_uuid>,<char_prop>

The response for a descriptor:

+BLEGATTSCHAR:"desc",<srv_index>,<char_index>,<desc_index>
OK

• <srv_index>: service’s index starting from 1.

• <char_index>: characteristic’s index starting from 1.

• <char_uuid>: characteristic’s UUID.

• <char_prop>: characteristic’s properties.

• <desc_index>: descriptor’s index.

• <desc_uuid>: descriptor’s UUID.

AT+BLEINIT=2   // Role: server
AT+BLEGATTSCHAR?

Function:

Notify a client of the value of a characteristic value from the server.

Command:

AT+BLEGATTSNTFY=<conn_index>,<srv_index>,<char_index>,<length>

Response:

The symbol > indicates that AT is ready for receiving serial data, and you can enter data now. When the requirement of data length determined by the parameter <length> is met, the notification starts.

If the data transmission is successful, AT returns:

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTSCHAR?.

• <char_index>: characteristic’s index. It can be queried with command AT+BLEGATTSCHAR?.

• <length>: data length. The maximum length is ( :ref:`MTU <cmd-BMTU>` - 3).

AT+BLEINIT=2      // Role: server.
AT+BLEADVPARAM=50,50,0,0,7,0,,
AT+BLEADVSTART    // Start advertising. After the client is connected, it must be configured to receive notifications.
AT+BLEGATTSCHAR?  // Query the characteristics which the client will be notified of.
// For example, to notify of 4-byte data using the 6th characteristic in the 3rd service, use the following command:
AT+BLEGATTSNTFY=0,3,6,4
// After the symbol ">" shows, enter the 4-byte data, such as "1234". Then the data will be transmitted automatically.

Function:

Indicate the characteristic value from the server to a client.

Command:

AT+BLEGATTSIND=<conn_index>,<srv_index>,<char_index>,<length>

Response:

The symbol > indicates that AT is ready for receiving serial data and you can enter data now. When the requirement of data length determined by the parameter <length> is met, the indication starts.

If the data transmission is successful, AT returns:

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTSCHAR?.

• <char_index>: characteristic’s index; it can be fetched with command AT+BLEGATTSCHAR?.

• <length>: data length. The maximum length is (MTU - 3).

AT+BLEINIT=2      // Role: server
AT+BLEADVPARAM=50,50,0,0,7,0,,
AT+BLEADVSTART    // Start advertising. After the client is connected, it must be configured to receive indications.
AT+BLEGATTSCHAR?  // Query the characteristics which the client can receive indications.
// For example, to indicate 4 bytes of data using the 7th characteristic in the 3rd service, use the following command:
AT+BLEGATTSIND=0,3,7,4
// After the symbol ">" shows, input 4 bytes of data, such as "1234". Then the data will be transmitted automatically.

Function:

GATTS sets its characteristic (descriptor).

Command:

AT+BLEGATTSSETATTR=<srv_index>,<char_index>,<length>

Response:

The symbol > indicates that AT is ready for receiving serial data and you can enter data now. When the requirement of data length determined by the parameter <length> is met, the setting starts.

If the setting is successful, AT returns:

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTSCHAR?.

• <char_index>: characteristic’s index; it can be fetched with command AT+BLEGATTSCHAR?.

• [<desc_index>]: descriptor’s index.

• If it is set, this command is used to set the value of the descriptor.

• Otherwise, this command is used to set the value of the characteristic.

• <length>: data length.

• If the value of <length> is larger than the maximum length allowed, the setting will fail. The service table is defined in gatts_data.csv .

• The characteristic descriptor value cannot be set.

AT+BLEINIT=2   // Role: server.
AT+BLEGATTSCHAR?
// For example, to set 1 byte of data of the 1st characteristic in the 1st service, use the following command:
AT+BLEGATTSSETATTR=1,1,1
// After the symbol ">" shows, input 1 byte of data, such as "8". Then the setting starts.

Function:

Generic Attributes Client (GATTC) discovers primary services.

Command:

AT+BLEGATTCPRIMSRV=<conn_index>

Response:

+BLEGATTCPRIMSRV:<conn_index>,<srv_index>,<srv_uuid>,<srv_type>
OK

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index starting from 1.

• <srv_uuid>: service’s UUID.

• <srv_type>: service’s type.

• 0: not primary service.

• 1: primary service.

• The Bluetooth LE connection has to be established first.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:12:5f:9d:91:98"
AT+BLEGATTCPRIMSRV=0

Function:

GATTC discovers included services.

Command:

AT+BLEGATTCINCLSRV=<conn_index>,<srv_index>

Response:

+BLEGATTCINCLSRV:<conn_index>,<srv_index>,<srv_uuid>,<srv_type>,<included_srv_uuid>,<included_srv_type>
OK

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTCPRIMSRV=<conn_index>.

• <srv_uuid>: service’s UUID.

• <srv_type>: service’s type.

• 0: not primary service.

• 1: primary service.

• <included_srv_uuid>: included service’s UUID.

• <included_srv_type>: included service’s type.

• 0: not primary service.

• 1: primary service.

• The Bluetooth LE connection has to be established first.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:12:5f:9d:91:98"
AT+BLEGATTCPRIMSRV=0
AT+BLEGATTCINCLSRV=0,1  // set a specific index according to the result of the previous command

Function:

GATTC discovers characteristics.

Command:

AT+BLEGATTCCHAR=<conn_index>,<srv_index>

Response:

The response for a characteristic:

+BLEGATTCCHAR:"char",<conn_index>,<srv_index>,<char_index>,<char_uuid>,<char_prop>

The response for a descriptor:

+BLEGATTCCHAR:"desc",<conn_index>,<srv_index>,<char_index>,<desc_index>,<desc_uuid>
OK

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTCPRIMSRV=<conn_index>.

• <char_index>: characteristic’s index starting from 1.

• <char_uuid>: characteristic’s UUID.

• <char_prop>: characteristic’s properties.

• <desc_index>: descriptor’s index.

• <desc_uuid>: descriptor’s UUID.

• The Bluetooth LE connection has to be established first.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:12:5f:9d:91:98"
AT+BLEGATTCPRIMSRV=0
AT+BLEGATTCCHAR=0,1 // set a specific index according to the result of the previous command

Function:

GATTC reads a characteristic or descriptor.

Command:

AT+BLEGATTCRD=<conn_index>,<srv_index>,<char_index>[,<desc_index>]

Response:

+BLEGATTCRD:<conn_index>,<len>,<value>
OK

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTCPRIMSRV=<conn_index>.

• <char_index>: characteristic’s index; it can be fetched with command AT+BLEGATTCCHAR=<conn_index>,<srv_index>.

• [<desc_index>]: descriptor’s index.

• If it is set, the value of the target descriptor will be read.

• if it is not set, the value of the target characteristic will be read.

• <len>: data length.

• <value>: <char_value> or <desc_value>.

• <char_value>: characteristic’s value. String format is read by command AT+BLEGATTCRD=<conn_index>,<srv_index>,<char_index>. For example, if the response is +BLEGATTCRD:0,1,0, it means that the value length is 1, and the content is “0”.

• <desc_value>: descriptor’s value. String format is read by command AT+BLEGATTCRD=<conn_index>,<srv_index>,<char_index>,<desc_index>. For example, if the response is +BLEGATTCRD:0,4,0123, it means that the value length is 4, and the content is “0123”.

• The Bluetooth LE connection has to be established first.

• If the target characteristic cannot be read, it will return “ERROR”.

AT+BLEINIT=1   // Role: client.
AT+BLECONN=0,"24:12:5f:9d:91:98"
AT+BLEGATTCPRIMSRV=0
AT+BLEGATTCCHAR=0,3 // Set a specific index according to the result of the previous command.
// For example, to read 1st descriptor of the 2nd characteristic in the 3rd service, use the following command:
AT+BLEGATTCRD=0,3,2,1

Function:

GATTC writes characteristics or descriptors.

Command:

AT+BLEGATTCWR=<conn_index>,<srv_index>,<char_index>[,<desc_index>],<length>

Response:

The symbol > indicates that AT is ready for receiving serial data and you can enter data now. When the requirement of data length determined by the parameter <length> is met, the writing starts.

If the setting is successful, AT returns:

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <srv_index>: service’s index. It can be queried with command AT+BLEGATTCPRIMSRV=<conn_index>.

• <char_index>: characteristic’s index; it can be fetched with command AT+BLEGATTCCHAR=<conn_index>,<srv_index>.

• [<desc_index>]: descriptor’s index.

• If it is set, the value of the target descriptor will be written.

• If it is not set, the value of the target characteristic will be written.

• <length>: data length. The value range of this parameter is subject to gatts_data.csv in val_max_len parameter.

• The Bluetooth LE connection has to be established first.

• If the target characteristic cannot be written, it will return “ERROR”.

AT+BLEINIT=1   // Role: client.
AT+BLECONN=0,"24:12:5f:9d:91:98"
AT+BLEGATTCPRIMSRV=0
AT+BLEGATTCCHAR=0,3 // Set a specific index according to the result of the previous command.
// For example, to write 6 bytes of data to the 4th characteristic in the 3rd service, use the following command:
AT+BLEGATTCWR=0,3,4,,6
// After the symbol ">" shows, input 6 bytes of data, such as "123456". Then the writing starts.

Function:

Query the parameters of Bluetooth LE Serial Port Profile (SPP).

Command:

Response:

+BLESPPCFG:<tx_service_index>,<tx_char_index>,<rx_service_index>,<rx_char_index>,<auto_conn>
OK

Function:

Set or reset the parameters of Bluetooth LE SPP.

Command:

AT+BLESPPCFG=<cfg_enable>[,<tx_service_index>,<tx_char_index>,<rx_service_index>,<rx_char_index>][,<auto_conn>]

Response:

• <cfg_enable>:

• 0: all the SPP parameters will be reset, and the following parameters do not need input.

• 1: you should input the following parameters.

• <tx_service_index>: tx service’s index. It can be queried with command AT+BLEGATTCPRIMSRV=<conn_index> and AT+BLEGATTSSRV?.

• <tx_char_index>: tx characteristic’s index. It can be queried with command AT+BLEGATTCCHAR=<conn_index>,<srv_index> and AT+BLEGATTSCHAR?.

• <rx_service_index>: rx service’s index. It can be queried with command AT+BLEGATTCPRIMSRV=<conn_index> and AT+BLEGATTSSRV?.

• <rx_char_index>: rx characteristic’s index. It can be queried with command AT+BLEGATTCCHAR=<conn_index>,<srv_index> and AT+BLEGATTSCHAR?.

• <auto_conn>: Bluetooth LE SPP auto-reconnection flag. By default, automatic reconnection is enabled.

• 0: disable Bluetooth LE SPP automatic reconnection.

• 1: enable Bluetooth LE SPP automatic reconnection

• In Bluetooth LE client, the property of tx characteristic must be write with response or write without response, and the property of rx characteristic must be indicate or notify.

• In Bluetooth LE server, the property of tx characteristic must be indicate or notify, and the property of rx characteristic must be write with response or write without response.

• If the automatic reconnection function is disabled, when the connection is disconnected, a disconnection message is displayed (depending on AT+SYSMSG), you need to send the connection command again; If this function is enabled, the connection will be automatically reconnected after disconnection, and the MCU side will not be aware of the disconnection. If the MAC of the peer end changes, the connection will fail.

AT+BLESPPCFG=0          // reset Bluetooth LE SPP parameters
AT+BLESPPCFG=1,3,5,3,7  // set Bluetooth LE SPP parameters
AT+BLESPPCFG?           // query Bluetooth LE SPP parameters

Function:

Enter Bluetooth LE SPP mode.

Command:

Response:

This response indicates that AT has entered Bluetooth LE SPP mode and can send and receive data.

If the Bluetooth LE SPP status is wrong ( Notifications are not enabled at the opposite end after the Bluetooth LE connection is established ), the system returns:

• During the SPP transmission, AT will not prompt any exit the Bluetooth LE SPP passthrough mode information unless Bit0 of AT+SYSMSG is 1.

• During the SPP transmission, AT will not prompt any connection status changes unless Bit2 of AT+SYSMSG is 1.

• When the packet which only contains +++ is received, the device returns to normal command mode. Please wait for at least one second before sending the next AT command.

AT+BLESPP   // enter Bluetooth LE SPP mode

Function:

Query the parameters of Bluetooth LE SMP.

Command:

Response:

+BLESECPARAM:<auth_req>,<iocap>,<enc_key_size>,<init_key>,<rsp_key>,<auth_option>
OK

Function:

Set the parameters of Bluetooth LE SMP.

Command:

AT+BLESECPARAM=<auth_req>,<iocap>,<enc_key_size>,<init_key>,<rsp_key>[,<auth_option>]

Response:

• <auth_req>: authentication request.

• 0: NO_BOND

• 1: BOND

• 4: MITM

• 8: SC_ONLY

• 9: SC_BOND

• 12: SC_MITM

• 13: SC_MITM_BOND

• <iocap>: input and output capability.

• 0: DisplayOnly

• 1: DisplayYesNo

• 2: KeyboardOnly

• 3: NoInputNoOutput

• 4: Keyboard display

• <enc_key_size>: encryption key size. Range: [7,16]. Unit: byte.

• <init_key>: initial key represented in bit combinations.

• <rsp_key>: response key represented in bit combinations.

• <auth_option>: authentication option of security.

• 0: Select the security level automatically.

• 1: If it cannot follow the preset security level, the connection will disconnect.

• The bit pattern for parameters <init_key> and <rsp_key> is:

• Bit0: Used to exchange the encryption key in the init key & response key.

• Bit1: Used to exchange the IRK key in the init key & response key.

• Bit2: Used to exchange the CSRK key in the init key & response key.

• Bit3: Used to exchange the link key (only used in the Bluetooth LE & BR/EDR coexist mode) in the init key & response key.

AT+BLESECPARAM=1,4,16,3,3,0

Function:

Start a pairing request

Command:

AT+BLEENC=<conn_index>,<sec_act>

Response:

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <sec_act>:

• 0: SEC_NONE

• 1: SEC_ENCRYPT

• 2: SEC_ENCRYPT_NO_MITM

• 3: SEC_ENCRYPT_MITM

• Before running this command, please set the security parameters and connection with remote devices.

AT+RESTORE
AT+BLEINIT=2
AT+BLEADDR?
AT+BLESECPARAM=1,0,16,3,3
AT+BLESETKEY=123456
AT+BLEADVPARAM=50,50,0,0,7,0,,
AT+BLEADVSTART
// Use your Bluetooth LE debugging app as a client to establish a Bluetooth LE connection with the ESP32-C2
AT+BLEENC=0,3

Function:

Reply a pairing key.

Command:

AT+BLEKEYREPLY=<conn_index>,<key>

Response:

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <key>: pairing key.

Function:

Reply a pairing result.

Command:

AT+BLECONFREPLY=<conn_index>,<confirm>

Response:

• <conn_index>: index of Bluetooth LE connection. Range: [0,2].

• <confirm>:

• 0: No

• 1: Yes

Function:

Query bonded Bluetooth LE encryption device list.

Command:

Response:

+BLEENCDEV:<enc_dev_index>,<mac_address>
OK

• <enc_dev_index>: index of the bonded devices. This parameter is not necessarily equal to the conn_index parameter in the Bluetooth LE connection list queried by the command AT+BLECONN. Range: [0,14].

• <mac_address>: MAC address.

• ESP-AT allows a maximum of 15 devices to be bonded. If the number of bonded devices exceeds 15, the newly bonded device information will sequentially (from 0 to 14) overwrite the previous device information according to the binding order.

Function:

Remove a device from the security database list with a specific index.

Command:

AT+BLEENCCLEAR=<enc_dev_index>

Response:

Function:

Remove all devices from the security database.

Command:

Response:

• <enc_dev_index>: index of the bonded devices.

Function:

Query the Bluetooth LE static pair key.

Command:

Response:

+BLESETKEY:<static_key>
OK

Function:

Set a Bluetooth LE static pair key for all Bluetooth LE connections.

Command:

AT+BLESETKEY=<static_key>

Response:

• <static_key>: static Bluetooth LE pair key.

Function:

Query the status of BluFi.

Command:

Response:

If BluFi is not started, it will return:

If BluFi is started, it will return:

Function:

Start or stop BluFi.

Command:

AT+BLUFI=<option>[,<auth floor>]

Response:

• <option>:

  • 0: stop BluFi

  • 1: start BluFi

• <auth floor>: Wi-Fi authentication mode floor. ESP-AT will not connect to the AP whose authmode is lower than this floor.

  • 0: OPEN (Default)

  • 1: WEP

  • 2: WPA_PSK

  • 3: WPA2_PSK

  • 4: WPA_WPA2_PSK

  • 5: WPA2_ENTERPRISE

  • 6: WPA3_PSK

  • 7: WPA2_WPA3_PSK

  • 8: WAPI_PSK

  • 9: OWE

  • 10: WPA3_ENT_192

  • 11: WPA3_EXT_PSK

  • 12: WPA3_EXT_PSK_MIXED_MODE

  • 13: DPP

  • 14: WPA3_ENTERPRISE

  • 15: WPA2_WPA3_ENTERPRISE

• You can only start or stop BluFi when Bluetooth LE is not initialized (AT+BLEINIT=0).

• To achieve better performance, it is recommended to disable SoftAP by sending the AT+CWMODE=0/1 command before using BluFi function. For more details, please refer to the RF Coexistence documentation.

• After BluFi network configuration is completed, please send the AT+BLUFI=0 command to disable BluFi and release resources.

Function:

Query the BluFi name.

Command:

Response:

+BLUFINAME:<device_name>
OK

Function:

Set the BluFi device name.

Command:

AT+BLUFINAME=<device_name>

Response:

• <device_name>: the name of BluFi device.

• If you need to set BluFi name, please set it before command AT+BLUFI=1. Otherwise, it will use the default name BLUFI_DEVICE.

• The maximum length of BluFi name is 26 bytes.

• The Blufi APP can be downloaded from the app store.

AT+BLUFINAME="BLUFI_DEV"
AT+BLUFINAME?

Function:

Send user-customized data from the ESP side to a phone over BluFi.

Command:

Response:

The symbol > indicates that AT is ready for receiving serial data and you can enter data now. When the requirement of data length determined by the parameter <length> is met, the transmission starts.

If the data transmission is successful, AT returns:

• <length>: customized data length. Unit: byte.

• The length of customized data cannot exceed 600 bytes.

• If your ESP chip receives customized data from the phone, the data will be printed in the form of +BLUFIDATA:<len>,<data>.

AT+BLUFISEND=4
// After the symbol ">" shows, input 4 bytes of data, such as "1234". Then the data will be transmitted automatically.

Function:

Set periodic advertising data.

Command:

AT+BLEPERIODICDATA=<periodic_data>

Response:

• <periodic_data>: Periodic advertising data in HEX string. For example, to set the periodic advertising data to “0x11 0x22 0x33 0x44 0x55”, the command should be AT+BLEPERIODICDATA="1122334455".

AT+BLEINIT=2   // Role: server
AT+BLEPERIODICDATA="1122334455"

Function:

Start periodic advertising.

Command:

Response:

• The extended advertising should be started before the start of periodic advertising, and the adv type should be ADV_TYPE_EXT_NOSCANNABLE_IND.

AT+BLEINIT=2   // Role: server
AT+BLEPERIODICDATA="1122334455" // Set periodic adv data
AT+BLEADVPARAM=32,32,5,0,7,0   // Set extended advertising parameters
AT+BLEADVSTART  // Start Extend advertising
AT+BLEPERIODICSTART  // Start periodic advertising

Function:

Stop periodic advertising.

Command:

Response:

AT+BLEPERIODICSTOP   // Stop periodic advertising

Function:

Synchroize with the target device and get the periodic advertising data.

Command:

AT+BLESYNCSTART=<target_address>

Response:

+BLESYNC:<addr>,<rssi>,<periodic_adv_data>
OK

• <addr>: Bluetooth LE address.

• <rssi>: signal strength.

• <periodic_adv_data>: periodic advertising data.

• Before you start to synchronize with the remote device, the blescan must be start.

AT+BLEINIT=1   // Role: client
AT+BLESCAN=1   // start Bluetooth LE scan
AT+BLESYNCSTART="24:0a:c4:09:34:23"  // try to Synchroize with the remote device

Function:

Stop synchronizing with the target device.

Command:

Response:

• If you stop blescan with AT+BLESCAN=0 command, the synchronization will be stopped automatically.

AT+BLEINIT=1   // Role: client
AT+BLESCAN=1   // start Bluetooth LE scan
AT+BLESYNCSTART="24:0a:c4:09:34:23"  // try to synchronize with the remote device
AT+BLESYNCSTOP  // Stop Synchroize with the remote device

Function:

Query the current transmitter PHY.

Command:

AT+BLEREADPHY=<conn_index>

Response:

If the query succeeds, it will return:

+BLEREADPHY:<device_addr>,<tx_PHY>,<rx_PHY>
OK

If the query fails, it will return:

• <device_addr>: remote device address.

• <tx_PHY>:

• 1: 1M PHY.

• 2: 2M PHY.

• 3: Coded PHY.

• <rx_PHY>:

• 1: 1M PHY.

• 2: 2M PHY.

• 3: Coded PHY.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:0a:c4:09:34:23"
AT+BLEREADPHY=0 // query current transmitter PHY

Function:

Set the current transmitter PHY.

Command:

AT+BLESETPHY=<conn_index>,<tx_rx_phy>

Response:

If the query succeeds, it will return:

+BLESETPHY:<device_addr>,<tx_PHY>,<rx_PHY>
OK

If the query fails, it will return:

• <device_addr>: remote device address.

• <tx_rx_phy>:

• 1: 1M PHY.

• 2: 2M PHY.

• 3: Coded PHY.

AT+BLEINIT=1   // Role: client
AT+BLECONN=0,"24:0a:c4:09:34:23"
AT+BLESETPHY=0,1

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4