External libraries testing is a compilation test for listed libraries on arduino-esp32 master branch. The test was made for users, so they can check which libraries are compiling without errors on which SoC. External libraries test is running periodically (once a week) against master branch and can also run on PR by adding a label lib_test. The test is running on all supported ESP32 chips.
Note
As the test is just a compilation of example, that does not guarantee that the library/sketch will run without any problems after flashing it on your device.
How to Add Library to TestïTo add a library to the CI test you need to add your library to the lib.json. file located in ./github/workflows/.
Note
Please add the libraries to the lib.json in alphabetical order, thanks.
List of parameters:ïWhere the library will be installed from (use only 1 option):
name - Name of the Library in Arduino Library Manager.
source-url - URL to the library github repository (example: âhttps://github.com/Arduino-IRremote/Arduino-IRremote.gitâ). Use when your Library is not listed in Arduino Library Manager.
Required:
exclude_targets - List of targets to be excluded from testing. Use only when the SoC dont support used peripheral.
sketch_path - Path / paths to the sketch / sketches to be tested.
Optional:
version - Version of the library.
required-libs - Libraries that are necessary to be installed to compile the tested library.
destination-name - Folder name used for the installation of library (use only when needed).
{
"name": "ArduinoBLE",
"exclude_targets": [
"esp32s2"
],
"sketch_path": [
"~/Arduino/libraries/ArduinoBLE/examples/Central/Scan/Scan.ino"
]
}
Example of library addition from Github URL with required library:ï
{
"source-url": "https://github.com/me-no-dev/ESPAsyncWebServer.git",
"required-libs": [
{"source-url": "https://github.com/me-no-dev/AsyncTCP.git"}
],
"exclude_targets": [],
"sketch_path": [
"~/Arduino/libraries/ESPAsyncWebServer/examples/CaptivePortal/CaptivePortal.ino",
"~/Arduino/libraries/ESPAsyncWebServer/examples/ESP_AsyncFSBrowser/ESP_AsyncFSBrowser.ino",
"~/Arduino/libraries/ESPAsyncWebServer/examples/regex_patterns/regex_patterns.ino",
"~/Arduino/libraries/ESPAsyncWebServer/examples/simple_server/simple_server.ino"
]
},
Submit a PRï
Open a PR with the changes and someone from Espressif team will add a label lib_test to the PR and CI will run the test to check, if the addition is fine and the library/example is compiling.
After merging your PR, the next scheduled test will test your library and add the results to the LIBRARIES_TEST.md.
There is a number before each icon, which means the number of examples which were compiled with that result.
- Compilation was successful.
- Compilation was successful, but some warnings occurs.
- Compilation failed.
N/A - Not tested (target is in exclude_targets list).
If the test run on Pull Request, it will compile all libraries and sketches 2 times (before/after changes in PR) to see, if the PR is breaking/fixing libraries. In the table the results are in order BEFORE -> AFTER.
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4