Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://docs.databricks.com/aws/en/dev-tools/cli/install below:

Install or update the Databricks CLI

This article describes how to install or update the Databricks CLI. See What is the Databricks CLI?. To configure authentication for the Databricks CLI, see Authentication for the Databricks CLI.

To install Databricks CLI version 0.205 or above:

• Linux or macOS: Use Homebrew, curl, or source builds.
• Windows: Use WinGet, Chocolatey, Windows Subsystem for Linux (WSL), or source builds.

The Databricks CLI is also available from within the Databricks workspace user interface. See Run Databricks CLI commands.

To update an earlier installation of Databricks CLI version 0.205 or above:

• Linux or macOS: Use Homebrew, curl, or source builds.
• Windows: Use WinGet, Chocolatey, Windows Subsystem for Linux (WSL), or source builds.

For this installation option, you use Homebrew to automatically download and install the latest Databricks CLI executable release.

From your terminal, just run the following two Homebrew commands to install the CLI:

Bash

brew tap databricks/tap
brew install databricks

Then continue with Authentication for the Databricks CLI.

If you are not sure whether you have Homebrew installed, or if the preceding Homebrew commands fail, follow these longer instructions:

1. Check whether Homebrew is already installed by running the following command from a Linux shell prompt or macOS Terminal. If Homebrew is installed, the Homebrew version number is displayed:

2. If Homebrew is not already installed, install it by running the following command:

   Bash

   /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
   

   Then run the following command to verify the Homebrew installation, which displays the Homebrew version number:

3. Use Homebrew to add the databricks/homebrew-tap repository in GitHub to your list of available Homebrew Tap repositories, by running the following command:

4. Use Homebrew to instruct the databricks/homebrew-tap repository to download and install the Databricks CLI executable, by running the following command:

5. Confirm whether the Databricks CLI is installed correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If a version number of 0.205.0 or above is listed, it means that the Databricks CLI is installed correctly.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

6. Continue with Authentication for the Databricks CLI.

For this installation option, you use winget to automatically download and install the latest Databricks CLI executable release.

1. From your Command Prompt, run the following two winget commands to install the CLI, and then restart your Command Prompt:

   Bash

   winget search databricks
   winget install Databricks.DatabricksCLI
   

2. Confirm whether the Databricks CLI is installed correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If a version number of 0.205.0 or above is listed, it means that the Databricks CLI is installed correctly.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

3. Continue with Authentication for the Databricks CLI.

note

Installing the Databricks CLI with Chocolatey is Experimental.

For this installation option, you use Chocolatey to automatically download and install the latest Databricks CLI executable release.

1. From your Command Prompt, run the following choco command to install the CLI:

   Bash

   choco install databricks-cli
   

2. Confirm whether the Databricks CLI is installed correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If a version number of 0.205.0 or above is listed, it means that the Databricks CLI is installed correctly.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

3. Continue with Authentication for the Databricks CLI.

For this installation option, you use curl to download and install the latest Databricks CLI executable release.

For Windows, Databricks recommends that you use Windows Subsystem for Linux (WSL). You must also have unzip installed. For installation instructions, see your operating system's documentation. If you cannot use WSL, skip this procedure and use the Command Prompt or PowerShell to install the Databricks CLI from source instead.

1. curl must be installed. You can check whether curl is already installed by running the following command from a Linux shell prompt, macOS Terminal, or Bash on WSL. If curl is installed, the curl version number is displayed:

2. If curl is not already installed, install it by following the instructions on the curl Releases and Downloads page for your operating system and architecture. To get your machine's architecture, see your operating system's documentation.

   Then run the following command to verify the curl installation, which displays the curl version number:

3. Use curl to download and install the Databricks CLI executable by running the following command (note that you must specify the correct uppercase and lowercase characters for -fsSL on all operating systems):

   Bash

   curl -fsSL https://raw.githubusercontent.com/databricks/setup-cli/main/install.sh | sh
   

   note

   To view the script's contents before you run it, see the install.sh file in the Databricks CLI Setup repository in GitHub.

   For Windows, you should run this command as an administrator.

   For Linux and macOS, if an error message states that /usr/local/bin is not writable, then run the command again with sudo.

   This command downloads and installs the Databricks CLI executable in the path /usr/local/bin/databricks on macOS and Linux, and C:\Windows\databricks.exe on Windows.

   If for some reason the Databricks CLI is already installed, the following error appears: “Target path <path> already exists.” To fix this, you must manually delete the Databricks CLI executable from the preceding path, and then run the curl command again.

4. Confirm whether the Databricks CLI is installed correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If a version number of 0.205.0 or above is listed, it means that the Databricks CLI is installed correctly.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

5. Continue with Authentication for the Databricks CLI.

For this installation option, you manually download a .zip file and then manually extract the Databricks CLI executable from the downloaded .zip file.

1. Download onto your local development machine the latest Databricks CLI .zip file, as listed in the Releases section of the Databricks CLI repository in GitHub. The latest release has a Latest label next to it in the list of releases. The latest pre-release has a Pre-release label and is more suitable for experimentation and early adopters. The .zip file that you download from the Assets section for the release must match your development machine's operating system and architecture:

   To get your machine's architecture, see your operating system's documentation. For example:

   • Linux: The terminal commands uname -m, lscpu, or sudo lshw -c cpu.
   • macOS: Apple icon menu > About This Mac, or the Terminal command uname -m.
   • Windows: The Command Prompt or PowerShell command echo %PROCESSOR_ARCHITECTURE%.

   If you need to verify the integrity of one of these .zip files, Databricks provides a checksum file named databricks_cli_X.Y.Z_SHA256SUMS in the same list as the .zip files. To run a checksum verification, see your operating system's documentation.

2. Extract the contents of the downloaded .zip file. To extract the .zip file, see your operating system's documentation.

3. In the extracted content, a folder appears with the same name as the .zip file. Inside of this folder is the Databricks CLI executable. You can leave the Databricks CLI executable there, or you can copy or move it to another location.

4. Confirm whether the Databricks CLI is installed correctly. To do this, from a Linux shell prompt, macOS Terminal, or Windows Command Prompt, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If a version number of 0.205.0 or above is listed, it means that the Databricks CLI is installed correctly.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

   For macOS, you might need to authorize your system to be able to run the Databricks CLI first. See Open a Mac app from an unidentified developer.

5. Continue with Authentication for the Databricks CLI.

For this update option, you use Homebrew to automatically update a previous installation of Databricks CLI version 0.205 or above to the latest version.

1. From a Linux shell prompt or macOS Terminal, use Homebrew to download and update to the latest version of the Databricks CLI executable by running the following command:

2. Confirm whether the Databricks CLI is updated correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If the expected updated version number displays, then the Databricks CLI is installed correctly.

   For a list of Databricks CLI versions, see the Releases section of the Databricks CLI repository in GitHub. The latest release has a Latest label next to it in the list of releases.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

tip

To downgrade the version of the Databricks CLI, see the instructions in the databricks/homebrew-tap repository in GitHub.

For this update option, you use winget to automatically download and update a previous version of Databricks CLI version 0.205 or above to the latest version.

1. From your Command Prompt, use winget to download and update to the latest version of the Databricks CLI executable by running the following command:

   Bash

   winget upgrade Databricks.DatabricksCLI
   

2. Confirm whether the Databricks CLI is installed correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If the expected updated version number displays, then the Databricks CLI is installed correctly.

   For a list of Databricks CLI versions, see the Releases section of the Databricks CLI repository in GitHub. The latest release has a Latest label next to it in the list of releases.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

note

Updating the Databricks CLI with Chocolatey is Experimental.

For this update option, you use Chocolatey to automatically download and update a previous version of Databricks CLI version 0.205 or above to the latest version.

1. From your Command Prompt, use choco to download and update to the latest version of the Databricks CLI executable by running the following command:

   Bash

   choco upgrade databricks-cli
   

2. Confirm whether the Databricks CLI is installed correctly. To do this, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If the expected updated version number displays, then the Databricks CLI is installed correctly.

   For a list of Databricks CLI versions, see the Releases section of the Databricks CLI repository in GitHub. The latest release has a Latest label next to it in the list of releases.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

For this update option, you use curl to automatically download and update a previous installation of Databricks CLI version 0.205 or above to the latest version.

For Windows, Databricks recommends that you use Windows Subsystem for Linux (WSL). You must have unzip installed. For installation instructions, see your operating system's documentation. If you cannot use WSL, you should skip this procedure and use the Command Prompt or PowerShell to update the Databricks CLI from source instead.

1. Delete the existing installation of the Databricks CLI executable from the path /usr/local/bin/databricks on macOS and Linux, or C:\Windows\databricks.exe on Windows.

2. From a Linux shell prompt, macOS Terminal, or Windows Command Prompt, use curl to download and install the latest version of the Databricks CLI executable by running the following command (note that you must specify the correct uppercase and lowercase characters for -fsSL):

   Bash

   curl -fsSL https://raw.githubusercontent.com/databricks/setup-cli/main/install.sh | sh
   

   note

   To view the script's contents before you run it, see the install.sh file in the Databricks CLI Setup repository in GitHub.

   For Windows, you should run this command as an administrator.

   For Linux and macOS, if an error message states that /usr/local/bin is not writable, then run the command again with sudo.

   This command downloads and installs the Databricks CLI executable in the path /usr/local/bin/databricks on macOS and Linux, and C:\Windows\databricks.exe on Windows.

   If the following error appears, you must manually delete the Databricks CLI executable from the preceding path, and then run the curl command again: “Target path <path> already exists.”

3. Confirm whether the Databricks CLI is updated correctly. To do this, from your terminal, view the Databricks CLI executable's version by using the -v option or by running the version command:

   Bash

   databricks -v
   
   
   databricks version
   

   If the expected updated version number displays, then the Databricks CLI is installed correctly.

   For a list of Databricks CLI versions, see the Releases section of the Databricks CLI repository in GitHub. The latest release has a Latest label next to it in the list of releases.

   note

   If you run databricks but get an error such as command not found: databricks, or if you run databricks -v and a version number of 0.18 or below is listed, this means that your machine cannot find the correct version of the Databricks CLI executable. To fix this, see Verify your CLI installation.

For this update option, you manually download a .zip file and then manually extract the Databricks CLI executable from the downloaded .zip file.

1. Optionally, delete the Databricks CLI executable, the .zip file, and the .zip file's extracted folder, from any previous manual source install procedure.
2. Continue by following the instructions in Source installation for Linux, macOS, and Windows.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4