Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
You can also return the item's attribute values in the same UpdateItem operation using the ReturnValues parameter.
{
"AttributeUpdates": {
"string" : {
"Action": "string",
"Value": {
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
}
},
"ConditionalOperator": "string",
"ConditionExpression": "string",
"Expected": {
"string" : {
"AttributeValueList": [
{
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
],
"ComparisonOperator": "string",
"Exists": boolean,
"Value": {
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
}
},
"ExpressionAttributeNames": {
"string" : "string"
},
"ExpressionAttributeValues": {
"string" : {
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
},
"Key": {
"string" : {
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
},
"ReturnConsumedCapacity": "string",
"ReturnItemCollectionMetrics": "string",
"ReturnValues": "string",
"ReturnValuesOnConditionCheckFailure": "string",
"TableName": "string",
"UpdateExpression": "string"
}The request accepts the following data in JSON format.
NoteIn the following list, the required parameters are described first.
The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.
Type: String to AttributeValue object map
Key Length Constraints: Maximum length of 65535.
Required: Yes
The name of the table containing the item to update. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 1024.
Required: Yes
This is a legacy parameter. Use UpdateExpression instead. For more information, see AttributeUpdates in the Amazon DynamoDB Developer Guide.
Type: String to AttributeValueUpdate object map
Key Length Constraints: Maximum length of 65535.
Required: No
This is a legacy parameter. Use ConditionExpression instead. For more information, see ConditionalOperator in the Amazon DynamoDB Developer Guide.
Type: String
Valid Values: AND | OR
Required: No
A condition that must be satisfied in order for a conditional update to succeed.
An expression can contain any of the following:
Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators: = | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information about condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
Type: String
Required: No
This is a legacy parameter. Use ConditionExpression instead. For more information, see Expected in the Amazon DynamoDB Developer Guide.
Type: String to ExpectedAttributeValue object map
Key Length Constraints: Maximum length of 65535.
Required: No
One or more substitution tokens for attribute names in an expression. The following are some use cases for using ExpressionAttributeNames:
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.) To work around this, you could specify the following for ExpressionAttributeNames:
You could then use this substitution in an expression, as in this example:
NoteTokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information about expression attribute names, see Specifying Item Attributes in the Amazon DynamoDB Developer Guide.
Type: String to string map
Value Length Constraints: Maximum length of 65535.
Required: No
One or more values that can be substituted in an expression.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Condition Expressions in the Amazon DynamoDB Developer Guide.
Type: String to AttributeValue object map
Required: No
Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:
INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.
Note that some operations, such as GetItem and BatchGetItem, do not access any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity information for table(s).
TOTAL - The response includes only the aggregate ConsumedCapacity for the operation.
NONE - No ConsumedCapacity details are included in the response.
Type: String
Valid Values: INDEXES | TOTAL | NONE
Required: No
Determines whether item collection metrics are returned. If set to SIZE, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to NONE (the default), no statistics are returned.
Type: String
Valid Values: SIZE | NONE
Required: No
Use ReturnValues if you want to get the item attributes as they appear before or after they are successfully updated. For UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if its value is NONE, then nothing is returned. (This setting is the default for ReturnValues.)
ALL_OLD - Returns all of the attributes of the item, as they appeared before the UpdateItem operation.
UPDATED_OLD - Returns only the updated attributes, as they appeared before the UpdateItem operation.
ALL_NEW - Returns all of the attributes of the item, as they appear after the UpdateItem operation.
UPDATED_NEW - Returns only the updated attributes, as they appear after the UpdateItem operation.
There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.
The values returned are strongly consistent.
Type: String
Valid Values: NONE | ALL_OLD | UPDATED_OLD | ALL_NEW | UPDATED_NEW
Required: No
An optional parameter that returns the item attributes for an UpdateItem operation that failed a condition check.
There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.
Type: String
Valid Values: ALL_OLD | NONE
Required: No
An expression that defines one or more attributes to be updated, the action to be performed on them, and new values for them.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an item. If any of these attributes already exist, they are replaced by the new values. You can also use SET to add or subtract from an attribute that is of type Number. For example: SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not contain an attribute at the specified path, then if_not_exists evaluates to operand; otherwise, it evaluates to path. You can use this function to avoid overwriting an attribute that may already be present in the item.
list_append (operand, operand) - evaluates to a list with a new element added to it. You can append the new element to the start or the end of the list by reversing the order of the operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an item.
ADD - Adds the specified value to the item, if the attribute does not already exist. If the attribute does exist, then the behavior of ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for an item that doesn't exist before the update, DynamoDB uses 0 as the initial value.
Similarly, if you use ADD for an existing item to increment or decrement an attribute value that doesn't exist before the update, DynamoDB uses 0 as the initial value. For example, suppose that the item you want to update doesn't have an attribute named itemcount, but you decide to ADD the number 3 to this attribute anyway. DynamoDB will create the itemcount attribute, set its initial value to 0, and finally add 3 to it. The result will be a new itemcount attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a set, then Value is added to the existing set. For example, if the attribute value is the set [1,2], and the ADD action specified [3], then the final attribute value is [1,2,3]. An error occurs if an ADD action is specified for a set attribute and the attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data types. In addition, ADD can only be used on top-level attributes, not nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted from the old set. For example, if the attribute value was the set [a,b,c] and the DELETE action specifies [a,c], then the final attribute value is [b]. Specifying an empty set is an error.
The DELETE action only supports set data types. In addition, DELETE can only be used on top-level attributes, not nested attributes.
You can have many actions in a single expression, such as the following: SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
Type: String
Required: No
{
"Attributes": {
"string" : {
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
},
"ConsumedCapacity": {
"CapacityUnits": number,
"GlobalSecondaryIndexes": {
"string" : {
"CapacityUnits": number,
"ReadCapacityUnits": number,
"WriteCapacityUnits": number
}
},
"LocalSecondaryIndexes": {
"string" : {
"CapacityUnits": number,
"ReadCapacityUnits": number,
"WriteCapacityUnits": number
}
},
"ReadCapacityUnits": number,
"Table": {
"CapacityUnits": number,
"ReadCapacityUnits": number,
"WriteCapacityUnits": number
},
"TableName": "string",
"WriteCapacityUnits": number
},
"ItemCollectionMetrics": {
"ItemCollectionKey": {
"string" : {
"B": blob,
"BOOL": boolean,
"BS": [ blob ],
"L": [
"AttributeValue"
],
"M": {
"string" : "AttributeValue"
},
"N": "string",
"NS": [ "string" ],
"NULL": boolean,
"S": "string",
"SS": [ "string" ]
}
},
"SizeEstimateRangeGB": [ number ]
}
}If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
A map of attribute values as they appear before or after the UpdateItem operation, as determined by the ReturnValues parameter.
The Attributes map is only present if the update was successful and ReturnValues was specified as something other than NONE in the request. Each element represents one attribute.
Type: String to AttributeValue object map
Key Length Constraints: Maximum length of 65535.
The capacity units consumed by the UpdateItem operation. The data returned includes the total provisioned throughput consumed, along with statistics for the table and any indexes involved in the operation. ConsumedCapacity is only returned if the ReturnConsumedCapacity parameter was specified. For more information, see Capacity unity consumption for write operations in the Amazon DynamoDB Developer Guide.
Type: ConsumedCapacity object
Information about item collections, if any, that were affected by the UpdateItem operation. ItemCollectionMetrics is only returned if the ReturnItemCollectionMetrics parameter was specified. If the table does not have any local secondary indexes, this information is not returned in the response.
Each ItemCollectionMetrics element consists of:
ItemCollectionKey - The partition key value of the item collection. This is the same as the partition key value of the item itself.
SizeEstimateRangeGB - An estimate of item collection size, in gigabytes. This value is a two-element array containing a lower bound and an upper bound for the estimate. The estimate includes the size of all the items in the table, plus the size of all attributes projected into all of the local secondary indexes on that table. Use this estimate to measure whether a local secondary index is approaching its size limit.
The estimate is subject to change over time; therefore, do not rely on the precision or accuracy of the estimate.
Type: ItemCollectionMetrics object
For information about the errors that are common to all actions, see Common Errors.
A condition specified in the operation failed to be evaluated.
HTTP Status Code: 400
An error occurred on the server side.
HTTP Status Code: 500
An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
HTTP Status Code: 400
The request was denied due to request throttling. For detailed information about why the request was throttled and the ARN of the impacted resource, find the ThrottlingReason field in the returned exception. The AWS SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
HTTP Status Code: 400
The request was rejected because one or more items in the request are being modified by a request in another Region.
HTTP Status Code: 400
Throughput exceeds the current throughput quota for your account. For detailed information about why the request was throttled and the ARN of the impacted resource, find the ThrottlingReason field in the returned exception. Contact Support to request a quota increase.
HTTP Status Code: 400
The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
HTTP Status Code: 400
The request was denied due to request throttling. For detailed information about why the request was throttled and the ARN of the impacted resource, find the ThrottlingReason field in the returned exception.
HTTP Status Code: 400
Operation was rejected because there is an ongoing transaction for the item.
HTTP Status Code: 400
This example updates the Thread table, changing the LastPostedBy attribute, but only if LastPostedBy is currently "fred@example.com". All of the item's attributes, as they appear after the update, are returned in the response.
POST / HTTP/1.1
Host: dynamodb.<region>.<domain>;
Accept-Encoding: identity
Content-Length: <PayloadSizeBytes>
User-Agent: <UserAgentString>
Content-Type: application/x-amz-json-1.0
Authorization: AWS4-HMAC-SHA256 Credential=<Credential>, SignedHeaders=<Headers>, Signature=<Signature>
X-Amz-Date: <Date>
X-Amz-Target: DynamoDB_20120810.UpdateItem
{
"TableName": "Thread",
"Key": {
"ForumName": {
"S": "Amazon DynamoDB"
},
"Subject": {
"S": "Maximum number of items?"
}
},
"UpdateExpression": "set LastPostedBy = :val1",
"ConditionExpression": "LastPostedBy = :val2",
"ExpressionAttributeValues": {
":val1": {"S": "alice@example.com"},
":val2": {"S": "fred@example.com"}
},
"ReturnValues": "ALL_NEW"
}HTTP/1.1 200 OK
x-amzn-RequestId: <RequestId>
x-amz-crc32: <Checksum>
Content-Type: application/x-amz-json-1.0
Content-Length: <PayloadSizeBytes>
Date: <Date>
{
"Attributes": {
"LastPostedBy": {
"S": "alice@example.com"
},
"ForumName": {
"S": "Amazon DynamoDB"
},
"LastPostDateTime": {
"S": "20130320010350"
},
"Tags": {
"SS": ["Update","Multiple Items","HelpMe"]
},
"Subject": {
"S": "Maximum number of items?"
},
"Views": {
"N": "5"
},
"Message": {
"S": "I want to put 10 million data items to an Amazon DynamoDB table. Is there an upper limit?"
}
}
}The following example increments the Replies attribute in the Thread table whenever someone posts a reply. Because ReturnValues is set to NONE, no output appears in the response payload.
POST / HTTP/1.1
Host: dynamodb.<region>.<domain>;
Accept-Encoding: identity
Content-Length: <PayloadSizeBytes>
User-Agent: <UserAgentString>
Content-Type: application/x-amz-json-1.0
Authorization: AWS4-HMAC-SHA256 Credential=<Credential>, SignedHeaders=<Headers>, Signature=<Signature>
X-Amz-Date: <Date>
X-Amz-Target: DynamoDB_20120810.UpdateItem
{
"TableName": "Thread",
"Key": {
"ForumName": {
"S": "Amazon DynamoDB"
},
"Subject": {
"S": "A question about updates"
}
},
"UpdateExpression": "set Replies = Replies + :num",
"ExpressionAttributeValues": {
":num": {"N": "1"}
},
"ReturnValues" : "NONE"
}HTTP/1.1 200 OK
x-amzn-RequestId: <RequestId>
x-amz-crc32: <Checksum>
Content-Type: application/x-amz-json-1.0
Content-Length: <PayloadSizeBytes>
Date: <Date>
{
}For more information about using this API in one of the language-specific AWS SDKs, see the following:
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4