Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://doc.rust-lang.org/nightly/reference/procedural-macros.html below:

Procedural Macros - The Rust Reference

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Procedural macros allow creating syntax extensions as execution of a function. Procedural macros come in one of three flavors:

• Function-like macros - custom!(...)
• Derive macros - #[derive(CustomDerive)]
• Attribute macros - #[CustomAttribute]

Procedural macros allow you to run code at compile time that operates over Rust syntax, both consuming and producing Rust syntax. You can sort of think of procedural macros as functions from an AST to another AST.

Procedural macros must be defined in the root of a crate with the crate type of proc-macro. The macros may not be used from the crate where they are defined, and can only be used when imported in another crate.

Note

When using Cargo, Procedural macro crates are defined with the proc-macro key in your manifest:

[lib]
proc-macro = true

As functions, they must either return syntax, panic, or loop endlessly. Returned syntax either replaces or adds the syntax depending on the kind of procedural macro. Panics are caught by the compiler and are turned into a compiler error. Endless loops are not caught by the compiler which hangs the compiler.

Procedural macros run during compilation, and thus have the same resources that the compiler has. For example, standard input, error, and output are the same that the compiler has access to. Similarly, file access is the same. Because of this, procedural macros have the same security concerns that Cargo’s build scripts have.

Procedural macros have two ways of reporting errors. The first is to panic. The second is to emit a compile_error macro invocation.

Procedural macro crates almost always will link to the compiler-provided proc_macro crate. The proc_macro crate provides types required for writing procedural macros and facilities to make it easier.

This crate primarily contains a TokenStream type. Procedural macros operate over token streams instead of AST nodes, which is a far more stable interface over time for both the compiler and for procedural macros to target. A token stream is roughly equivalent to Vec<TokenTree> where a TokenTree can roughly be thought of as lexical token. For example foo is an Ident token, . is a Punct token, and 1.2 is a Literal token. The TokenStream type, unlike Vec<TokenTree>, is cheap to clone.

All tokens have an associated Span. A Span is an opaque value that cannot be modified but can be manufactured. Spans represent an extent of source code within a program and are primarily used for error reporting. While you cannot modify a Span itself, you can always change the Span associated with any token, such as through getting a Span from another token.

Procedural macros are unhygienic. This means they behave as if the output token stream was simply written inline to the code it’s next to. This means that it’s affected by external items and also affects external imports.

Macro authors need to be careful to ensure their macros work in as many contexts as possible given this limitation. This often includes using absolute paths to items in libraries (for example, ::std::option::Option instead of Option) or by ensuring that generated functions have names that are unlikely to clash with other functions (like __internal_foo instead of foo).

Function-like procedural macros are procedural macros that are invoked using the macro invocation operator (!).

These macros are defined by a public function with the proc_macro attribute and a signature of (TokenStream) -> TokenStream. The input TokenStream is what is inside the delimiters of the macro invocation and the output TokenStream replaces the entire macro invocation.

The proc_macro attribute defines the macro in the macro namespace in the root of the crate.

For example, the following macro definition ignores its input and outputs a function answer into its scope.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro]
pub fn make_answer(_item: TokenStream) -> TokenStream {
    "fn answer() -> u32 { 42 }".parse().unwrap()
}

And then we use it in a binary crate to print “42” to standard output.

extern crate proc_macro_examples;
use proc_macro_examples::make_answer;

make_answer!();

fn main() {
    println!("{}", answer());
}

Function-like procedural macros may be invoked in any macro invocation position, which includes statements, expressions, patterns, type expressions, item positions, including items in extern blocks, inherent and trait implementations, and trait definitions.

Applying the proc_macro_derive attribute to a function defines a derive macro that can be invoked by the derive attribute. These macros are given the token stream of a struct, enum, or union definition and can emit new items after it. They can also declare and use derive macro helper attributes.

Example

This derive macro ignores its input and appends tokens that define a function.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_derive(AnswerFn)]
pub fn derive_answer_fn(_item: TokenStream) -> TokenStream {
    "fn answer() -> u32 { 42 }".parse().unwrap()
}

To use it, we might write:

extern crate proc_macro_examples;
use proc_macro_examples::AnswerFn;

#[derive(AnswerFn)]
struct Struct;

fn main() {
    assert_eq!(42, answer());
}

The syntax for the proc_macro_derive attribute is:

The name of the derive macro is given by DeriveMacroName. The optional attributes argument is described in macro.proc.derive.attributes.

The proc_macro_derive attribute may only be applied to a pub function with the Rust ABI defined in the root of the crate with a type of fn(TokenStream) -> TokenStream where TokenStream comes from the proc_macro crate. The function may be const and may use extern to explicitly specify the Rust ABI, but it may not use any other qualifiers (e.g. it may not be async or unsafe).

The proc_macro_derive attribute may be specified only once on a function.

The proc_macro_derive attribute publicly defines the derive macro in the macro namespace in the root of the crate.

The input TokenStream is the token stream of the item to which the derive attribute is applied. The output TokenStream must be a (possibly empty) set of items. These items are appended following the input item within the same module or block.

Derive macros can declare derive macro helper attributes to be used within the scope of the item to which the derive macro is applied. These attributes are inert. While their purpose is to be used by the macro that declared them, they can be seen by any macro.

A helper attribute for a derive macro is declared by adding its identifier to the attributes list in the proc_macro_derive attribute.

Example

This declares a helper attribute and then ignores it.

#![crate_type="proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_derive(WithHelperAttr, attributes(helper))]
pub fn derive_with_helper_attr(_item: TokenStream) -> TokenStream {
    TokenStream::new()
}

To use it, we might write:

#[derive(WithHelperAttr)]
struct Struct {
    #[helper] field: (),
}

Attribute macros define new outer attributes which can be attached to items, including items in extern blocks, inherent and trait implementations, and trait definitions.

Attribute macros are defined by a public function with the proc_macro_attribute attribute that has a signature of (TokenStream, TokenStream) -> TokenStream. The first TokenStream is the delimited token tree following the attribute’s name, not including the outer delimiters. If the attribute is written as a bare attribute name, the attribute TokenStream is empty. The second TokenStream is the rest of the item including other attributes on the item. The returned TokenStream replaces the item with an arbitrary number of items.

The proc_macro_attribute attribute defines the attribute in the macro namespace in the root of the crate.

For example, this attribute macro takes the input stream and returns it as is, effectively being the no-op of attributes.

#![crate_type = "proc-macro"]
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_attribute]
pub fn return_as_is(_attr: TokenStream, item: TokenStream) -> TokenStream {
    item
}

This following example shows the stringified TokenStreams that the attribute macros see. The output will show in the output of the compiler. The output is shown in the comments after the function prefixed with “out:”.

// my-macro/src/lib.rs
extern crate proc_macro;
use proc_macro::TokenStream;

#[proc_macro_attribute]
pub fn show_streams(attr: TokenStream, item: TokenStream) -> TokenStream {
    println!("attr: \"{attr}\"");
    println!("item: \"{item}\"");
    item
}

// src/lib.rs
extern crate my_macro;

use my_macro::show_streams;

// Example: Basic function
#[show_streams]
fn invoke1() {}
// out: attr: ""
// out: item: "fn invoke1() {}"

// Example: Attribute with input
#[show_streams(bar)]
fn invoke2() {}
// out: attr: "bar"
// out: item: "fn invoke2() {}"

// Example: Multiple tokens in the input
#[show_streams(multiple => tokens)]
fn invoke3() {}
// out: attr: "multiple => tokens"
// out: item: "fn invoke3() {}"

// Example:
#[show_streams { delimiters }]
fn invoke4() {}
// out: attr: "delimiters"
// out: item: "fn invoke4() {}"

Declarative macro_rules macros and procedural macros use similar, but different definitions for tokens (or rather TokenTrees.)

Token trees in macro_rules (corresponding to tt matchers) are defined as

• Delimited groups ((...), {...}, etc)
• All operators supported by the language, both single-character and multi-character ones (+, +=).
  • Note that this set doesn’t include the single quote '.
• Literals ("string", 1, etc)
  • Note that negation (e.g. -1) is never a part of such literal tokens, but a separate operator token.
• Identifiers, including keywords (ident, r#ident, fn)
• Lifetimes ('ident)
• Metavariable substitutions in macro_rules (e.g. $my_expr in macro_rules! mac { ($my_expr: expr) => { $my_expr } } after the mac’s expansion, which will be considered a single token tree regardless of the passed expression)

Token trees in procedural macros are defined as

• Delimited groups ((...), {...}, etc)
• All punctuation characters used in operators supported by the language (+, but not +=), and also the single quote ' character (typically used in lifetimes, see below for lifetime splitting and joining behavior)
• Literals ("string", 1, etc)
  • Negation (e.g. -1) is supported as a part of integer and floating point literals.
• Identifiers, including keywords (ident, r#ident, fn)

Mismatches between these two definitions are accounted for when token streams are passed to and from procedural macros.
Note that the conversions below may happen lazily, so they might not happen if the tokens are not actually inspected.

When passed to a proc-macro

• All multi-character operators are broken into single characters.
• Lifetimes are broken into a ' character and an identifier.
• The keyword metavariable $crate is passed as a single identifier.
• All other metavariable substitutions are represented as their underlying token streams.
  • Such token streams may be wrapped into delimited groups (Group) with implicit delimiters (Delimiter::None) when it’s necessary for preserving parsing priorities.
  • tt and ident substitutions are never wrapped into such groups and always represented as their underlying token trees.

When emitted from a proc macro

• Punctuation characters are glued into multi-character operators when applicable.
• Single quotes ' joined with identifiers are glued into lifetimes.
• Negative literals are converted into two tokens (the - and the literal) possibly wrapped into a delimited group (Group) with implicit delimiters (Delimiter::None) when it’s necessary for preserving parsing priorities.

Note that neither declarative nor procedural macros support doc comment tokens (e.g. /// Doc), so they are always converted to token streams representing their equivalent #[doc = r"str"] attributes when passed to macros.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4