Home Assistant provides a RESTful API on the same port as the web frontend (default port is port 8123).
If you are not using the frontend in your setup then you need to add the api integration to your configuration.yaml file.
http://IP_ADDRESS:8123/ is an interface to control Home Assistant.http://IP_ADDRESS:8123/api/ is a RESTful API.The API accepts and returns only JSON encoded objects.
All API calls have to be accompanied by the header Authorization: Bearer TOKEN, where TOKEN is replaced by your unique access token. You obtain a token ("Long-Lived Access Token") by logging into the frontend using a web browser, and going to your profile http://IP_ADDRESS:8123/profile. Be careful to copy the whole key.
There are multiple ways to consume the Home Assistant Rest API. One is with curl:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
http://IP_ADDRESS:8123/ENDPOINT
Another option is to use Python and the Requests module.
from requests import get
url = "http://localhost:8123/ENDPOINT"
headers = {
"Authorization": "Bearer TOKEN",
"content-type": "application/json",
}
response = get(url, headers=headers)
print(response.text)
Another option is to use the RESTful Command integration in a Home Assistant automation or script.
turn_light_on:
url: http://localhost:8123/api/states/light.study_light
method: POST
headers:
authorization: 'Bearer TOKEN'
content-type: 'application/json'
payload: '{"state":"on"}'
Successful calls will return status code 200 or 201. Other status codes that can return are:
The API supports the following actions:
Returns a message if the API is up and running.
{
"message": "API running."
}
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" http://localhost:8123/api/
Returns the current configuration as JSON.
{
"components":[
"sensor.cpuspeed",
"frontend",
"config.core",
"http",
"map",
"api",
"sun",
"config",
"discovery",
"conversation",
"recorder",
"group",
"sensor",
"websocket_api",
"automation",
"config.automation",
"config.customize"
],
"config_dir":"/home/ha/.homeassistant",
"elevation":510,
"latitude":45.8781529,
"location_name":"Home",
"longitude":8.458853651,
"time_zone":"Europe/Zurich",
"unit_system":{
"length":"km",
"mass":"g",
"temperature":"\u00b0C",
"volume":"L"
},
"version":"0.56.2",
"whitelist_external_dirs":[
"/home/ha/.homeassistant/www",
"/home/ha/.homeassistant/"
]
}
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" http://localhost:8123/api/config
Returns an array of event objects. Each event object contains event name and listener count.
[
{
"event": "state_changed",
"listener_count": 5
},
{
"event": "time_changed",
"listener_count": 2
}
]
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" http://localhost:8123/api/events
Returns an array of service objects. Each object contains the domain and which services it contains.
[
{
"domain": "browser",
"services": [
"browse_url"
]
},
{
"domain": "keyboard",
"services": [
"volume_up",
"volume_down"
]
}
]
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" http://localhost:8123/api/services
Returns an array of state changes in the past. Each object contains further details for the entities.
The <timestamp> (YYYY-MM-DDThh:mm:ssTZD) is optional and defaults to 1 day before the time of the request. It determines the beginning of the period.
The following parameters are required:
filter_entity_id=<entity_ids> to filter on one or more entities - comma separated.You can pass the following optional GET parameters:
end_time=<timestamp> to choose the end of the period in URL encoded format (defaults to 1 day).minimal_response to only return last_changed and state for states other than the first and last state (much faster).no_attributes to skip returning attributes from the database (much faster).significant_changes_only to only return significant state changes.Example without minimal_response
[
[
{
"attributes": {
"friendly_name": "Weather Temperature",
"unit_of_measurement": "\u00b0C"
},
"entity_id": "sensor.weather_temperature",
"last_changed": "2016-02-06T22:15:00+00:00",
"last_updated": "2016-02-06T22:15:00+00:00",
"state": "-3.9"
},
{
"attributes": {
"friendly_name": "Weather Temperature",
"unit_of_measurement": "\u00b0C"
},
"entity_id": "sensor.weather_temperature",
"last_changed": "2016-02-06T22:15:00+00:00",
"last_updated": "2016-02-06T22:15:00+00:00",
"state": "-1.9"
},
]
]
Example with minimal_response
[
[
{
"attributes": {
"friendly_name": "Weather Temperature",
"unit_of_measurement": "\u00b0C"
},
"entity_id": "sensor.weather_temperature",
"last_changed": "2016-02-06T22:15:00+00:00",
"last_updated": "2016-02-06T22:15:00+00:00",
"state": "-3.9"
},
{
"last_changed": "2016-02-06T22:20:00+00:00",
"state": "-2.9"
},
{
"last_changed": "2016-02-06T22:22:00+00:00",
"state": "-2.2"
},
{
"attributes": {
"friendly_name": "Weather Temperature",
"unit_of_measurement": "\u00b0C"
},
"entity_id": "sensor.weather_temperature",
"last_changed": "2016-02-06T22:25:00+00:00",
"last_updated": "2016-02-06T22:25:00+00:00",
"state": "-1.9"
},
]
]
Sample curl commands:
# History of the entity 'sensor.temperature' of the past day (default)
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
"http://localhost:8123/api/history/period?filter_entity_id=sensor.temperature"
# Minimal history of the entity 'sensor.temperature' and 'sensor.kitchen_temperature' of the past day where the beginning date is set manually to 2023-09-04
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
"http://localhost:8123/api/history/period/2023-09-04T00:00:00+02:00?filter_entity_id=sensor.temperature,sensor.kitchen_temperature&minimal_response"
# History of the entity 'sensor.temperature' during the period from 2021-09-04 to 2023-09-04
# Using URL encoded timestamps
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
"http://localhost:8123/api/history/period/2021-09-04T00%3A00%3A00%2B02%3A00?end_time=2023-09-04T00%3A00%3A00%2B02%3A00&filter_entity_id=sensor.temperature"
Returns an array of logbook entries.
The <timestamp> (YYYY-MM-DDThh:mm:ssTZD) is optional and defaults to 1 day before the time of the request. It determines the beginning of the period.
You can pass the following optional GET parameters:
entity=<entity_id> to filter on one entity.end_time=<timestamp> to choose the end of period starting from the <timestamp> in URL encoded format.Example
[
{
"context_user_id": null,
"domain": "alarm_control_panel",
"entity_id": "alarm_control_panel.area_001",
"message": "changed to disarmed",
"name": "Security",
"when": "2020-06-20T16:44:26.127295+00:00"
},
{
"context_user_id": null,
"domain": "homekit",
"entity_id": "alarm_control_panel.area_001",
"message": "send command alarm_arm_night for Security",
"name": "HomeKit",
"when": "2020-06-21T02:59:05.759645+00:00"
},
{
"context_user_id": null,
"domain": "alarm_control_panel",
"entity_id": "alarm_control_panel.area_001",
"message": "changed to armed_night",
"name": "Security",
"when": "2020-06-21T02:59:06.015463+00:00"
}
]
Sample curl commands:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
http://localhost:8123/api/logbook/2016-12-29T00:00:00+02:00
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
"http://localhost:8123/api/logbook/2016-12-29T00:00:00+02:00?end_time=2099-12-31T00%3A00%3A00%2B02%3A00&entity=sensor.temperature"
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
"http://localhost:8123/api/logbook/2016-12-29T00:00:00+02:00?end_time=2099-12-31T00%3A00%3A00%2B02%3A00"
Returns an array of state objects. Each state has the following attributes: entity_id, state, last_changed and attributes.
[
{
"attributes": {},
"entity_id": "sun.sun",
"last_changed": "2016-05-30T21:43:32.418320+00:00",
"state": "below_horizon"
},
{
"attributes": {},
"entity_id": "process.Dropbox",
"last_changed": "22016-05-30T21:43:32.418320+00:00",
"state": "on"
}
]
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" http://localhost:8123/api/states
Returns a state object for specified entity_id. Returns 404 if not found.
{
"attributes":{
"azimuth":336.34,
"elevation":-17.67,
"friendly_name":"Sun",
"next_rising":"2016-05-31T03:39:14+00:00",
"next_setting":"2016-05-31T19:16:42+00:00"
},
"entity_id":"sun.sun",
"last_changed":"2016-05-30T21:43:29.204838+00:00",
"last_updated":"2016-05-30T21:50:30.529465+00:00",
"state":"below_horizon"
}
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
http://localhost:8123/api/states/sensor.kitchen_temperature
Retrieve all errors logged during the current session of Home Assistant as a plaintext response.
15-12-20 11:02:50 homeassistant.components.recorder: Found unfinished sessions
15-12-20 11:03:03 netdisco.ssdp: Error fetching description at http://192.168.1.1:8200/rootDesc.xml
15-12-20 11:04:36 homeassistant.components.alexa: Received unknown intent HelpIntent
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
http://localhost:8123/api/error_log
Returns the data (image) from the specified camera entity_id.
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
-o image.jpg \
"http://localhost:8123/api/camera_proxy/camera.my_sample_camera?time=1462653861261"
Returns the list of calendar entities.
[
{
"entity_id": "calendar.holidays",
"name": "National Holidays",
},
{
"entity_id": "calendar.personal",
"name": "Personal Calendar",
}
]
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
http://localhost:8123/api/calendars
Returns the list of calendar events for the specified calendar entity_id between the start and end times (exclusive).
The events in the response have a start and end that contain either dateTime or date for an all day event.
[
{
"summary": "Cinco de Mayo",
"start": {
"date": "2022-05-05"
},
"end": {
"date": "2022-05-06"
},
},
{
"summary": "Birthday Party",
"start": {
"dateTime": "2022-05-06T20:00:00-07:00"
},
"end": {
"dateTime": "2022-05-06T23:00:00-07:00"
},
"description": "Don't forget to bring balloons",
"location": "Brian's House"
}
]
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
"http://localhost:8123/api/calendars/calendar.holidays?start=2022-05-01T07:00:00.000Z&end=2022-06-12T07:00:00.000Z"
Updates or creates a state. You can create any state that you want, it does not have to be backed by an entity in Home Assistant.
info
This endpoint sets the representation of a device within Home Assistant and will not communicate with the actual device. To communicate with the device, use the POST /api/services/<domain>/<service> endpoint.
Expects a JSON object that has at least a state attribute:
{
"state": "below_horizon",
"attributes": {
"next_rising":"2016-05-31T03:39:14+00:00",
"next_setting":"2016-05-31T19:16:42+00:00"
}
}
The return code is 200 if the entity existed, 201 if the state of a new entity was set. A location header will be returned with the URL of the new resource. The response body will contain a JSON encoded State object.
{
"attributes": {
"next_rising":"2016-05-31T03:39:14+00:00",
"next_setting":"2016-05-31T19:16:42+00:00"
},
"entity_id": "sun.sun",
"last_changed": "2016-05-30T21:43:29.204838+00:00",
"last_updated": "2016-05-30T21:47:30.533530+00:00",
"state": "below_horizon"
}
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
-d '{"state": "25", "attributes": {"unit_of_measurement": "°C"}}' \
http://localhost:8123/api/states/sensor.kitchen_temperature
Sample python command using the Requests module:
from requests import post
url = "http://localhost:8123/api/states/sensor.kitchen_temperature"
headers = {"Authorization": "Bearer TOKEN", "content-type": "application/json"}
data = {"state": "25", "attributes": {"unit_of_measurement": "°C"}}
response = post(url, headers=headers, json=data)
print(response.text)
Fires an event with event_type. Please be mindful of the data structure as documented on our Data Science portal.
You can pass an optional JSON object to be used as event_data.
{
"next_rising":"2016-05-31T03:39:14+00:00",
}
Returns a message if successful.
{
"message": "Event download_file fired."
}
Calls a service within a specific domain. Will return when the service has been executed.
You can pass an optional JSON object to be used as service_data.
{
"entity_id": "light.Ceiling"
}
Returns a list of states that have changed while the service was being executed, and optionally response data, if supported by the service.
[
{
"attributes": {},
"entity_id": "sun.sun",
"last_changed": "2016-05-30T21:43:32.418320+00:00",
"state": "below_horizon"
},
{
"attributes": {},
"entity_id": "process.Dropbox",
"last_changed": "22016-05-30T21:43:32.418320+00:00",
"state": "on"
}
]
tip
The result will include any states that changed while the service was being executed, even if their change was the result of something else happening in the system.
If the service you're calling supports returning response data, you can retrieve it by adding ?return_response to the URL. Your response will then contain both the list of changed entities and the service response data.
{
"changed_states": [
{
"attributes": {},
"entity_id": "sun.sun",
"last_changed": "2024-04-22T20:45:54.418320-04:00",
"state": "below_horizon"
},
{
"attributes": {},
"entity_id": "binary_sensor.dropbox",
"last_changed": "2024-04-22T20:45:54.418320-04:00",
"state": "on"
}
],
"service_response": {
"weather.new_york_forecast": {
"forecast": [
{
"condition": "clear-night",
"datetime": "2024-04-22T20:45:55.173725-04:00",
"precipitation_probability": 0,
"temperature": null,
"templow": 6.0
},
{
"condition": "rainy",
"datetime": "2024-04-23T20:45:55.173756-04:00",
"precipitation_probability": 60,
"temperature": 16.0,
"templow": 4.0
}
]
}
}
}
note
Some services return no data, others optionally return response data, and some always return response data.
If you don't use return_response when calling a service that must return data, the API will return a 400. Similarly, you will receive a 400 if you use return_response when calling a service that doesn't return any data.
Sample curl commands:
Turn the light on:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
-d '{"entity_id": "switch.christmas_lights"}' \
http://localhost:8123/api/services/switch/turn_on
Sample python command using the Requests module:
Turn the light on:
from requests import post
url = "http://localhost:8123/api/services/light/turn_on"
headers = {"Authorization": "Bearer TOKEN"}
data = {"entity_id": "light.study_light"}
response = post(url, headers=headers, json=data)
print(response.text)
Send an MQTT message:
curl \
-H "Content-Type: application/json" \
-H "Authorization: Bearer TOKEN" \
-d '{"payload": "OFF", "topic": "home/fridge", "retain": "True"}' \
http://localhost:8123/api/services/mqtt/publish
Retrieve daily weather forecast information:
curl \
-H "Content-Type: application/json" \
-H "Authorization: Bearer TOKEN" \
-d '{"entity_id": "weather.forecast_home", "type": "daily"}' \
http://localhost:8123/api/services/weather/get_forecasts?return_response
Render a Home Assistant template. See template docs for more information.
{
"template": "Paulus is at {{ states('device_tracker.paulus') }}!"
}
Returns the rendered template in plain text.
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
-d '{"template": "It is {{ now() }}!"}' http://localhost:8123/api/template
Trigger a check of configuration.yaml. No additional data needs to be passed in with this request. Needs config integration enabled.
If the check is successful, the following will be returned:
{
"errors": null,
"result": "valid"
}
If the check fails, the errors attribute in the object will list what caused the check to fail. For example:
{
"errors": "Integration not found: frontend:",
"result": "invalid"
}
Handle an intent.
You must add intent: to your configuration.yaml to enable this endpoint.
Sample curl command:
curl \
-H "Authorization: Bearer TOKEN" \
-H 'Content-Type: application/json' \
-d '{ "name": "SetTimer", "data": { "seconds": "30" } }' \
http://localhost:8123/api/intent/handle
Deletes an entity with the specified entity_id.
Sample curl command:
curl \
-X DELETE \
-H "Authorization: Bearer TOKEN" \
-H "Content-Type: application/json" \
http://localhost:8123/api/states/sensor.kitchen_temperature
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4