Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://crankyoldgit.github.io/IRremoteESP8266/doxygen/html/ir__Argo_8h_source.html below:

IRremoteESP8266: src/ir_Argo.h Source File

<

ARGO_PROTOCOL_T>

(

uint16_t pin,

inverted =

,

use_modulation =

);

(

uint8_t degrees);

uint8_t

(

)

;

(

)

;

uint16_t length);

(

uint8_t state[],

uint16_t length);

(

uint8_t state[],

uint16_t length);

uint8_t

(

uint8_t state[],

uint16_t length);

uint8_t

(

uint8_t state[],

uint16_t length);

(

uint16_t pin,

inverted =

,

use_modulation =

);

(

uint8_t mode);

uint8_t

(

)

;

(

uint8_t fan);

uint8_t

(

)

;

(

uint8_t flap);

uint8_t

(

)

;

(

uint16_t pin,

inverted =

,

use_modulation =

);

(

)

;

(

uint8_t paramId,

uint8_t value);

(

uint8_t state[],

uint16_t length);

verifyChecksum =

);

uint8_t RoomTemp

argoIrMessageType_t

Definition: ir_Argo.h:98

uint32_t Sum

Definition: ir_Argo.h:66

static uint8_t getChecksum(const uint8_t state[], const uint16_t length)

Retrieve the checksum value from transmitted state.

Definition: ir_Argo.cpp:436

void setFan(const uint8_t fan)

Set the speed of the fan.

Definition: ir_Argo.cpp:751

uint8_t Fan

Definition: ir_Argo.h:102

struct ArgoProtocolWREM3::Config config

ARGO_PROTOCOL_T _

The raw protocol data.

Definition: ir_Argo.h:404

argoFan_t getFanEx(void) const

-Ex for backw. compat w/ IRArgoAC

Definition: ir_Argo.cpp:659

const uint8_t kArgoHeatBlink

Definition: ir_Argo.h:209

uint8_t CurrentWeekdayHi

Definition: ir_Argo.h:135

uint8_t TimerType

Definition: ir_Argo.h:129

argo_ac_remote_model_t getModel(void) const

Get device model.

Definition: ir_Argo.cpp:1545

static stdAc::ac_command_t toCommonCommand(const argoIrMessageType_t command)

Convert a native message type into its stdAc equivalent.

Definition: ir_Argo.cpp:1189

void sendSensorTemp(const uint8_t degrees, const uint16_t repeat=kArgoDefaultRepeat)

Send current room temperature for the iFeel feature as a silent IR message (no acknowledgement from t...

Definition: ir_Argo.cpp:527

void setDelayTimerMinutes(const uint16_t delayMinutes)

Set delay timer delay in minutes (10-minute increments only) Max is 1190 (19h50m)

Definition: ir_Argo.cpp:1444

swingv_t

Common A/C settings for Vertical Swing.

Definition: IRsend.h:74

uint8_t getFan(void) const

Get the current fan speed setting.

Definition: ir_Argo.cpp:758

uint8_t getTemp(void) const

Get the current temperature setting.

Definition: ir_Argo.cpp:647

void setFanEx(const argoFan_t fan)

Definition: ir_Argo.h:349

uint64_t Pre1

Definition: ir_Argo.h:33

uint8_t CurrentTimeHi

Definition: ir_Argo.h:132

const uint8_t kArgoMaxTemp

Definition: ir_Argo.h:172

const uint16_t kArgoDefaultRepeat

Definition: IRremoteESP8266.h:1166

void setFlap(const uint8_t flap)

Set the flap position. i.e. Swing. (WREM2)

Definition: ir_Argo.cpp:789

void setCurrentTimeMinutes(uint16_t currentTimeMinutes)

Set current clock (as minutes, counted from 0:00) E.g. 13:38 becomes 818 (13*60+38)

Definition: ir_Argo.cpp:1387

static stdAc::opmode_t toCommonMode(const argoMode_t mode)

Convert a native mode into its stdAc equivalent.

Definition: ir_Argo.cpp:1209

String toString(void) const

Convert the current internal state into a human readable string (WREM2).

Definition: ir_Argo.cpp:1317

void setChannel(const uint8_t channel)

Set the IR channel on which to communicate.

Definition: ir_Argo.cpp:966

fanspeed_t

Common A/C settings for Fan Speeds.

Definition: IRsend.h:61

uint8_t iFeel

Definition: ir_Argo.h:106

bool getEco(void) const

Get the status of Economy function.

Definition: ir_Argo.cpp:946

void stateReset(argoIrMessageType_t messageType=argoIrMessageType_t::AC_CONTROL)

Reset the internals of the object to a known good state.

Definition: ir_Argo.cpp:413

uint16_t getRawByteLength() const

Get actual raw state byte length for the current state.

Definition: ir_Argo.cpp:258

const uint8_t kArgoFlap2

Definition: ir_Argo.h:249

argoFlap_t getFlap(void) const

Definition: ir_Argo.cpp:927

uint8_t TimerEndHi

Definition: ir_Argo.h:145

uint8_t getFlap(void) const

Get the flap position. i.e. Swing. (WREM2)

Definition: ir_Argo.cpp:798

uint32_t Night

Definition: ir_Argo.h:58

uint16_t _length

Definition: ir_Argo.h:405

void setLight(const bool on)

Turn on/off the device Lights (LED)

Definition: ir_Argo.cpp:958

int8_t calibrate(void)

Run the calibration to calculate uSec timing offsets for this platform.

Definition: ir_Argo.h:332

std::set< argoWeekday > getScheduleTimerActiveDays(void) const

Get the days when shedule timer shall be active (as set)

Definition: ir_Argo.cpp:1530

const uint8_t kArgoFlap4

Definition: ir_Argo.h:251

bool getMax(void) const

Is the Max (i.e. Turbo) setting on?

Definition: ir_Argo.cpp:630

std::pair< uint8_t, uint8_t > getConfigEntry(void) const

Get the config entry previously set.

Definition: ir_Argo.cpp:986

void setFan(const argoFan_t fan)

Set the desired fan mode (WREM3).

Definition: ir_Argo.cpp:731

argoMode_t

A/C operation mode.

Definition: ir_Argo.h:192

const uint8_t kArgoHeatBit

Definition: ir_Argo.h:161

static argoMode_t convertMode(const stdAc::opmode_t mode)

Convert a stdAc::opmode_t enum into its native mode.

Definition: ir_Argo.cpp:1062

uint8_t CheckLo

Definition: ir_Argo.h:77

static bool validChecksum(const uint8_t state[], const uint16_t length)

Verify the checksum is valid for a given state.

Definition: ir_Argo.cpp:474

uint8_t Mode

Definition: ir_Argo.h:99

void setEco(const bool on)

Turn on/off the Economy mode (lowered power mode)

Definition: ir_Argo.cpp:942

uint8_t IrCommandType

0..3 range

Definition: ir_Argo.h:96

const uint8_t kArgoPreamble2

Definition: ir_Argo.h:163

const uint8_t kArgoFlap3

Definition: ir_Argo.h:250

argoFan_t getFan(void) const

Definition: ir_Argo.cpp:926

uint8_t Temp

argoMode_t

Definition: ir_Argo.h:101

void setScheduleTimerActiveDays(const std::set< argoWeekday > &days)

Set the days when the schedule timer shall be active.

Definition: ir_Argo.cpp:1518

const uint8_t kArgoPost

Definition: ir_Argo.h:164

Class for sending all basic IR protocols.

Definition: IRsend.h:237

void setTimerType(const argoTimerType_t timerType)

Set timer type.

Definition: ir_Argo.cpp:1426

argoMode_t getModeEx(void) const

-Ex for backw. compat w/ IRArgoAC

Definition: ir_Argo.cpp:811

const uint8_t kArgoMaxChannel

Definition: ir_Argo.h:173

int8_t calibrate(uint16_t hz=38000U)

Calculate & set any offsets to account for execution times during sending.

Definition: IRsend.cpp:207

ac_command_t

Tyoe of A/C command (if the remote uses different codes for each)

Definition: IRsend.h:90

uint8_t TimerStartHi

Definition: ir_Argo.h:141

const uint16_t kArgoStateLength

Definition: IRremoteESP8266.h:1158

std::string String

Definition: IRremoteESP8266.h:1521

Definition: ir_Argo.h:124

const uint8_t kArgoFan1

Definition: ir_Argo.h:227

void setScheduleTimerStopMinutes(const uint16_t stopTimeMinutes)

Set schedule timer off time (time when the device should turn off) (10-minute increments only)

Definition: ir_Argo.cpp:1491

static stdAc::fanspeed_t toCommonFanSpeed(const argoFan_t speed)

Convert a native fan speed into its stdAc equivalent.

Definition: ir_Argo.cpp:1224

void setMessageType(const argoIrMessageType_t msgType)

Set the message type of the next command (setting this resets state)

Definition: ir_Argo.cpp:1003

const uint8_t kArgoOff

Definition: ir_Argo.h:205

uint64_t Flap

Definition: ir_Argo.h:42

bool getNight(void) const

Get the status of Night mode. i.e. Sleep.

Definition: ir_Argo.cpp:938

uint8_t Max

a.k.a. Turbo

Definition: ir_Argo.h:109

uint8_t Sum

Unknown, always 0b110000 (TempScale?)

Definition: ir_Argo.h:115

const uint8_t kArgoFlapFull

Definition: ir_Argo.h:254

uint8_t CurrentTimeLo

Definition: ir_Argo.h:130

uint64_t Mode

Definition: ir_Argo.h:38

uint8_t TimerStartLo

Definition: ir_Argo.h:139

static bool hasValidPreamble(const uint8_t state[], const uint16_t length)

Check if raw ARGO state starts with valid WREM3 preamble.

Definition: ir_Argo.cpp:1662

bool getiFeel(void) const

Get the status of iFeel mode.

Definition: ir_Argo.cpp:998

uint8_t getSensorTemp(void) const

Get the currently stored value for the room temperature setting.

Definition: ir_Argo.cpp:1032

Base class for handling common support for Argo remote protocols (functionality is shared across WREM...

Definition: ir_Argo.h:314

uint8_t Filter

Definition: ir_Argo.h:111

const uint16_t kArgoFrequency

Definition: ir_Argo.h:167

const uint8_t kArgoDry

Definition: ir_Argo.h:203

stdAc::state_t toCommon(void) const

Convert the current internal state into its stdAc::state_t equivalent.

Definition: ir_Argo.cpp:1239

static argoFan_t convertFan(const stdAc::fanspeed_t speed)

Convert a stdAc::fanspeed_t enum into it's native speed.

Definition: ir_Argo.cpp:1082

Supports Argo A/C SAC-WREM3 IR remote protocol.

Definition: ir_Argo.h:449

uint8_t Checksum

Definition: ir_Argo.h:150

bool getPower(void) const

Get the power setting from the internal state.

Definition: ir_Argo.cpp:604

const uint8_t kArgoAuto

Definition: ir_Argo.h:204

String toString(void) const

Convert the current internal state into a human readable string (WREM3).

Definition: ir_Argo.cpp:1564

uint8_t Key

Definition: ir_Argo.h:154

argoTimerType_t getTimerType(void) const

Get currently set timer type.

Definition: ir_Argo.cpp:1436

uint8_t Post1

Definition: ir_Argo.h:149

uint64_t Temp

Definition: ir_Argo.h:39

uint32_t Power

Definition: ir_Argo.h:61

uint8_t Light

Definition: ir_Argo.h:112

void _stateReset(ARGO_PROTOCOL_T *state, argoIrMessageType_t messageType=argoIrMessageType_t::AC_CONTROL)

void setMode(const argoMode_t mode)

Set the desired operation mode.

Definition: ir_Argo.cpp:887

uint8_t Value

Definition: ir_Argo.h:155

argoIrMessageType_t _messageType

Definition: ir_Argo.h:406

void setFilter(const bool on)

Turn on/off the Filter mode (not supported by Argo Ulisse)

Definition: ir_Argo.cpp:950

const uint8_t kArgoFlap1

Definition: ir_Argo.h:248

uint8_t raw[kArgoStateLength]

The state in native IR code form.

Definition: ir_Argo.h:30

uint64_t Pre2

Definition: ir_Argo.h:35

void setPower(const bool on)

Set the internal state to have the desired power.

Definition: ir_Argo.cpp:589

void setNight(const bool on)

Turn on/off the Night mode. i.e. Sleep.

Definition: ir_Argo.cpp:933

uint8_t Flap

argoFan_t

Definition: ir_Argo.h:104

uint8_t SensorT

Definition: ir_Argo.h:121

stdAc::state_t toCommon(void) const

Convert the current internal state into its stdAc::state_t equivalent.

Definition: ir_Argo.cpp:1268

argoWeekday

Day type to set (for argoIrMessageType_t::TIMER_COMMAND)

Definition: ir_Argo.h:292

uint8_t IsOn

Definition: ir_Argo.h:128

uint8_t Checksum

Definition: ir_Argo.h:156

uint8_t DelayTimeLo

Definition: ir_Argo.h:136

argoMode_t getMode(void) const

Definition: ir_Argo.cpp:928

void setMax(const bool on)

Control the current Max setting. (i.e. Turbo)

Definition: ir_Argo.cpp:623

uint64_t Fan

Definition: ir_Argo.h:40

uint8_t IrChannel

Preamble: 0b1011 kArgoWrem3Preamble.

Definition: ir_Argo.h:95

uint8_t SensorT

Definition: ir_Argo.h:75

void setTemp(const uint8_t degrees)

Set the temperature.

Definition: ir_Argo.cpp:636

void begin(void)

Set up hardware to be able to send a message.

Definition: ir_Argo.cpp:125

uint8_t CurrentWeekdayLo

Definition: ir_Argo.h:133

uint8_t CheckHi

Definition: ir_Argo.h:74

uint32_t Post

Definition: ir_Argo.h:65

void setRaw(const uint8_t state[], const uint16_t length)

Set the raw state of the object.

Definition: ir_Argo.cpp:556

uint32_t Max

Definition: ir_Argo.h:59

uint64_t RoomTemp

Definition: ir_Argo.h:41

uint8_t Power

SwingV argoFlap_t.

Definition: ir_Argo.h:105

uint8_t raw[kArgoStateLength]

The state in native IR code form.

Definition: ir_Argo.h:91

void off(void)

Set the internal state to have the power off.

Definition: ir_Argo.cpp:568

uint8_t TimerEndLo

Definition: ir_Argo.h:143

uint8_t * getRaw(void)

Get the raw state of the object, suitable to be sent with the appropriate IRsend object method.

Definition: ir_Argo.cpp:546

argoIrMessageType_t

IR message type (determines the payload part of IR command)

Definition: ir_Argo.h:182

const uint8_t kArgoMinTemp

Definition: ir_Argo.h:171

void setSensorTemp(const uint8_t degrees)

Set the value for the current room temperature.

Definition: ir_Argo.cpp:1018

uint8_t getChannel(void) const

Get the currently set transmission channel.

Definition: ir_Argo.cpp:972

uint8_t Pre1

Definition: ir_Argo.h:94

uint8_t Fixed

Definition: ir_Argo.h:76

IRsend _irsend

instance of the IR send class

Definition: ir_Argo.h:411

void setCurrentDayOfWeek(argoWeekday dayOfWeek)

Set current day of week.

Definition: ir_Argo.cpp:1401

uint8_t getTimerActiveDaysBitmap(void) const

Get the days when shedule timer shall be active (as bitmap)

Definition: ir_Argo.cpp:1512

Definition: ir_Argo.h:152

uint16_t getCurrentTimeMinutes(void) const

Retrieve current time.

Definition: ir_Argo.cpp:1395

static argoFlap_t convertSwingV(const stdAc::swingv_t position)

Convert a stdAc::swingv_t enum into it's native setting.

Definition: ir_Argo.cpp:1105

void setiFeel(const bool on)

Turn on/off the iFeel mode.

Definition: ir_Argo.cpp:993

argoFlap_t

Flap position (swing-V)

Definition: ir_Argo.h:234

static uint16_t getStateLengthForIrMsgType(argoIrMessageType_t type)

Get byte length of raw WREM-3 message based on IR cmd type.

Definition: ir_Argo.cpp:160

Native representation of A/C IR message for WREM-3 remote.

Definition: ir_Argo.h:90

const uint8_t kArgoFan2

Definition: ir_Argo.h:228

const uint8_t kArgoCool

Definition: ir_Argo.h:202

void checksum(void)

Update the checksum for the internal state.

Definition: ir_Argo.cpp:365

uint8_t Post1

Definition: ir_Argo.h:113

const uint8_t kArgoHeatAuto

Definition: ir_Argo.h:207

Native representation of a Argo A/C message for WREM-2 remote.

Definition: ir_Argo.h:29

void setScheduleTimerStartMinutes(const uint16_t startTimeMinutes)

Set schedule timer on time (time when the device should turn on) (10-minute increments only)

Definition: ir_Argo.cpp:1467

static uint8_t calcChecksum(const uint8_t state[], const uint16_t length)

Calculate the checksum for a given state (WREM-3).

Definition: ir_Argo.cpp:291

uint8_t CheckHi

Definition: ir_Argo.h:122

static bool isValidWrem3Message(const uint8_t state[], const uint16_t nbits, bool verifyChecksum=true)

Detects if an ARGO protocol message is a WREM-3 sub-type (model)

Definition: ir_Argo.cpp:1768

uint8_t Eco

Definition: ir_Argo.h:108

const uint8_t kArgoHeat

Definition: ir_Argo.h:206

struct ArgoProtocolWREM3::Timer timer

argoWeekday getCurrentDayOfWeek(void) const

Get current day of week.

Definition: ir_Argo.cpp:1410

uint8_t Night

Definition: ir_Argo.h:107

bool getLight(void) const

Get status of device lights.

Definition: ir_Argo.cpp:962

uint8_t getMode(void) const

Get the current operation mode.

Definition: ir_Argo.cpp:924

static argoIrMessageType_t convertCommand(const stdAc::ac_command_t command)

Convert a stdAc::ac_command_t enum into its native message type.

Definition: ir_Argo.cpp:1043

const uint8_t kArgoFlap5

Definition: ir_Argo.h:252

IRArgoAC(const uint16_t pin, const bool inverted=false, const bool use_modulation=true)

Class constructor.

Definition: ir_Argo.cpp:110

const uint8_t kArgoTempDelta

Definition: ir_Argo.h:169

void setModeEx(const argoMode_t mode)

Definition: ir_Argo.h:357

argoFlap_t getFlapEx(void) const

-Ex for backw. compat w/ IRArgoAC

Definition: ir_Argo.cpp:767

const uint8_t kArgoFlap6

Definition: ir_Argo.h:253

void setFlap(const argoFlap_t flap)

Set the desired flap mode.

Definition: ir_Argo.cpp:774

uint16_t getScheduleTimerStopMinutes(void) const

Get schedule timer OFF time.

Definition: ir_Argo.cpp:1505

uint8_t DelayTimeHi

Definition: ir_Argo.h:138

uint16_t getDelayTimerMinutes(void) const

Get current delay timer value.

Definition: ir_Argo.cpp:1457

void setConfigEntry(const uint8_t paramId, const uint8_t value)

Set the config data to send Valid only for argoIrMessageType_t::CONFIG_PARAM_SET message.

Definition: ir_Argo.cpp:978

argoTimerType_t

Timer type to set (for argoIrMessageType_t::TIMER_COMMAND)

Definition: ir_Argo.h:282

uint16_t getScheduleTimerStartMinutes(void) const

Get schedule timer ON time.

Definition: ir_Argo.cpp:1481

void _checksum(ARGO_PROTOCOL_T *state)

argoIrMessageType_t getMessageType(void) const

Get the message type.

Definition: ir_Argo.cpp:1010

uint32_t iFeel

Definition: ir_Argo.h:63

void setFlapEx(const argoFlap_t flap)

Definition: ir_Argo.h:353

argoFan_t

Fan speed.

Definition: ir_Argo.h:214

void sendSensorTemp(const uint8_t degrees, const uint16_t repeat=kArgoDefaultRepeat)

Send current room temperature for the iFeel feature as a silent IR message (no acknowledgement from t...

Definition: ir_Argo.cpp:505

const uint8_t kArgoFlapAuto

Definition: ir_Argo.h:247

argo_ac_remote_model_t

Argo A/C model numbers.

Definition: IRsend.h:226

void send(const uint16_t repeat=kArgoDefaultRepeat)

Send the current internal state as an IR message.

Definition: ir_Argo.cpp:484

uint8_t TimerActiveDaysLo

Definition: ir_Argo.h:146

bool getFilter(void) const

Get status of the filter function.

Definition: ir_Argo.cpp:954

Structure to hold a common A/C state.

Definition: IRsend.h:114

const uint8_t kArgoFan3

Definition: ir_Argo.h:229

Supports Argo A/C SAC-WREM2 IR remote protocol.

Definition: ir_Argo.h:422

const uint8_t kArgoPreamble1

Definition: ir_Argo.h:162

static stdAc::swingv_t toCommonSwingV(const uint8_t position)

Convert a native flap mode into its stdAc equivalent (WREM3).

Definition: ir_Argo.cpp:1162

const uint8_t kArgoFanAuto

Definition: ir_Argo.h:226

uint8_t TimerActiveDaysHi

Definition: ir_Argo.h:148

void setMode(const uint8_t mode)

Set the desired operation mode.

Definition: ir_Argo.cpp:905

const uint8_t kArgoMaxRoomTemp

Definition: ir_Argo.h:170

IRArgoAC_WREM3(const uint16_t pin, const bool inverted=false, const bool use_modulation=true)

Class constructor.

Definition: ir_Argo.cpp:119

void on(void)

Set the internal state to have the power on.

Definition: ir_Argo.cpp:564

IRArgoACBase(const uint16_t pin, const bool inverted=false, const bool use_modulation=true)

Class constructor.

Definition: ir_Argo.cpp:101

opmode_t

Common A/C settings for A/C operating modes.

Definition: IRsend.h:49

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4