Showing content from https://crankyoldgit.github.io/IRremoteESP8266/doxygen/html/classIRBosch144AC.html below:
IRremoteESP8266: IRBosch144AC Class Reference
Class for handling detailed Bosch144 A/C messages. More...
#include <ir_Bosch.h>
Class for handling detailed Bosch144 A/C messages.
◆ IRBosch144AC() IRBosch144AC::IRBosch144AC ( const uint16_t pin, const bool inverted = false, const bool use_modulation = true ) explicit
Class constructor.
-
Parameters
-
[in] pin GPIO to be used when sending. [in] inverted Is the output signal to be inverted? [in] use_modulation Is frequency modulation to be used?
◆ begin() void IRBosch144AC::begin ( )
Set up hardware to be able to send a message.
◆ calibrate() int8_t IRBosch144AC::calibrate ( void ) inline
Run the calibration to calculate uSec timing offsets for this platform.
-
Returns
-
The uSec timing offset needed per modulation of the IR Led.
-
Note
-
This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.
◆ convertFan()
Convert a stdAc::fanspeed_t enum into it's native speed.
-
Parameters
-
[in] speed The enum to be converted.
-
Returns
-
The native equivalent of the enum.
◆ convertMode()
Convert a stdAc::opmode_t enum into its native mode.
-
Parameters
-
[in] mode The enum to be converted.
-
Returns
-
The native equivalent of the enum.
◆ getFan() uint16_t IRBosch144AC::getFan ( void ) const ◆ getMode() uint8_t IRBosch144AC::getMode ( void ) const ◆ getPower() bool IRBosch144AC::getPower ( void ) const ◆ getQuiet() bool IRBosch144AC::getQuiet ( void ) const
Get the Quiet mode of the A/C.
-
Returns
-
true, the setting is on. false, the setting is off.
◆ getRaw() unsigned char * IRBosch144AC::getRaw ( void )
Get a copy of the internal state as a valid code for this protocol.
-
Returns
-
A valid code for this protocol based on the current internal state.
◆ getTemp() uint8_t IRBosch144AC::getTemp ( void ) const ◆ getTempRaw() uint8_t IRBosch144AC::getTempRaw ( void ) const private ◆ send() void IRBosch144AC::send ( const uint16_t repeat = 0 )
Send the current internal state as an IR message.
-
Parameters
-
[in] repeat Nr. of times the message will be repeated.
◆ setCheckSumS3() void IRBosch144AC::setCheckSumS3 ( ) private ◆ setFan() void IRBosch144AC::setFan ( const uint16_t speed )
Set the speed of the fan.
-
Parameters
-
[in] speed The desired setting.
◆ setInvertBytes() void IRBosch144AC::setInvertBytes ( ) private ◆ setMode() void IRBosch144AC::setMode ( const uint8_t mode )
Set the desired operation mode.
-
Parameters
-
[in] mode The desired operation mode.
◆ setPower() void IRBosch144AC::setPower ( const bool state ) ◆ setQuiet() void IRBosch144AC::setQuiet ( const bool on )
Set the Quiet mode of the A/C.
-
Parameters
-
[in] on true, the setting is on. false, the setting is off.
◆ setRaw() void IRBosch144AC::setRaw ( const uint8_t new_code[], const uint16_t length = kBosch144StateLength )
Set the internal state from a valid code for this protocol.
-
Parameters
-
[in] new_code A valid code for this protocol. [in] length Size of the array being passed in in bytes.
◆ setTemp() void IRBosch144AC::setTemp ( const uint8_t degrees )
Set the temperature.
-
Parameters
-
[in] degrees The temperature in degrees celsius.
◆ setTempRaw() void IRBosch144AC::setTempRaw ( const uint8_t code ) private ◆ stateReset() void IRBosch144AC::stateReset ( void )
Reset the internal state to a fixed known good state.
◆ toCommon()
Convert the current internal state into its stdAc::state_t equivalent.
-
Returns
-
The stdAc equivalent of the native settings.
◆ toCommonFanSpeed()
Convert a native fan speed into its stdAc equivalent.
-
Parameters
-
[in] speed The native setting to be converted.
-
Returns
-
The stdAc equivalent of the native setting.
◆ toCommonMode()
Convert a native mode into its stdAc equivalent.
-
Parameters
-
[in] mode The native setting to be converted.
-
Returns
-
The stdAc equivalent of the native setting.
◆ toString() String IRBosch144AC::toString ( void ) const
Convert the current internal state into a human readable string.
-
Returns
-
A human readable string.
◆ _
The state of the IR remote in IR code form.
◆ _irsend
Instance of the IR send class.
◆ powerFlag bool IRBosch144AC::powerFlag private
The documentation for this class was generated from the following files:
RetroSearch is an open source project built by @garambo
| Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4