RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/techhtmlul below:

Test: HTML Unordered list test

A screen reader user needs to know when they enter and exit a list.

All of the listed commands must pass for the expectation to pass.

AT Browser Has Support Output Dragon Naturally Speaking Chrome not applicable - JAWS Chrome yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to `ol`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list of 3 items"
Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"

JAWS Edge yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to `ol`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list of 3 items"
Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"

JAWS Firefox yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to `ol`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list of 3 items"
Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"

Narrator Edge yes

Result: (pass)
- Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forward to `ol`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "enter list, 1 of 3, level 1, bullet, cats"
Result: (pass)
- Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forwards to the end of `ol`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "exit list"

NVDA Chrome yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `ol`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list with 3 items, bullet, cats"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "out of list"

NVDA Edge yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `ol`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list with 3 items, bullet, cats"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "out of list"

NVDA Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `ol`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list with 3 items, bullet, cats"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "out of list"

Orca Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `ol`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list with 3 items, bullet, cats"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "leaving list"

TalkBack Chrome none

Result: (fail)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `ol`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "bullet" (swipe right) "cats"
Result: (fail)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forwards to the end of `ol`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "end example"

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. Voice Access (Android) Chrome not applicable - Voice Control (iOS) Safari not applicable - Voice Control (MacOS) Safari not applicable - VoiceOver (iOS) Safari yes

Result: (pass)
- Test Case: Use Swipe Right (Next item) to navigate forward to `ol`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Cats, list start"
Result: (pass)
- Test Case: Use Swipe Right (Next item) to navigate forwards to the end of `ol`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "Birds, list end"

VoiceOver (macOS) Safari yes

Result: (pass)
- Test Case: Use VO + Right arrow (Read next item) to navigate forward to `ol`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "list 3 items"
Result: (pass)
- Test Case: Use VO + Right arrow (Read next item) to navigate forwards to the end of `ol`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:ol
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "end of list"

Windows Speech Recognition Edge not applicable - Windows Speech Recognition Chrome not applicable - Windows Voice Access Edge not applicable - Windows Voice Access Chrome not applicable - Windows Keyboard Chrome not applicable - Windows Keyboard Firefox not applicable - Windows Keyboard Edge not applicable - Mac Keyboard Chrome not applicable - Mac Keyboard Safari not applicable - iOS Keyboard Safari not applicable - Android Keyboard Chrome not applicable -

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/tech__html__ul below:

Test: HTML Unordered list test

Showing content from https://a11ysupport.io/tests/techhtmlul below: