RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/techhtmlmaxlength-attribute below:

Test: HTML maxlength attribute test

This expectation is applied to the input[type="text"] element. Expectations and results might differ when the the feature is applied to different roles.

The user may wish to know the maximum length when navigating to an input, and before they enter any data.

Just one of the listed commands must pass for the expectation to pass.

AT Browser Has Support Output Dragon Naturally Speaking Chrome not applicable - JAWS Chrome none

Result: (fail)
- Test Case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number (4 characters), edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number (4 characters), edit, type in text"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. JAWS Edge none

Result: (fail)
- Test Case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number (4 characters), edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number (4 characters), edit, type in text"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. JAWS Firefox none

Result: (fail)
- Test Case: Use Down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number (4 characters), edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number (4 characters), edit, type in text"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. Narrator Edge none

Result: (fail)
- Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forward to `*[maxlength]`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. NVDA Chrome none

Result: (fail)
- Test Case: Use down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit, blank"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. NVDA Edge none

Result: (fail)
- Test Case: Use down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit, blank"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. NVDA Firefox none

Result: (fail)
- Test Case: Use down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "clickable, pin number, 4 characters, edit, has auto complete"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit has auto complete, blank"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. Orca Firefox none

Result: (fail)
- Test Case: Use down arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, entry"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, entry"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Result: (fail)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `*[maxlength]`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "edit box, pin number, 4 characters"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. Voice Access (Android) Chrome not applicable - Voice Control (iOS) Safari not applicable - Voice Control (MacOS) Safari not applicable - VoiceOver (iOS) Safari none

Result: (fail)
- Test Case: Use Swipe Right (Next item) to navigate forward to `*[maxlength]`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, text field"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Result: (fail)
- Test Case: Use VO + Right arrow (Read next item) to navigate forward to `*[maxlength]`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit text"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.
Result: (fail)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `*[maxlength]`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:*[maxlength]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "pin number, 4 characters, edit text"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. Windows Speech Recognition Edge not applicable - Windows Speech Recognition Chrome not applicable - Windows Voice Access Edge not applicable - Windows Voice Access Chrome not applicable - Windows Keyboard Chrome not applicable - Windows Keyboard Firefox not applicable - Windows Keyboard Edge not applicable - Mac Keyboard Chrome not applicable - Mac Keyboard Safari not applicable - iOS Keyboard Safari not applicable - Android Keyboard Chrome not applicable -

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/tech__html__maxlength-attribute below:

Test: HTML maxlength attribute test

Showing content from https://a11ysupport.io/tests/techhtmlmaxlength-attribute below: