RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/techhtmlinput__input-checkbox below:

Test: Basic html checkbox test

A screen reader user needs to know what to enter.

Just one of the listed commands must pass for the expectation to pass.

For form inputs - commands to read line by line (down and up arrows in most windows screen readers) will not always result in the name being explicitly conveyed when the virtual focus is moved to an input where the label is visually displayed and programmatically associated with the input. This is acceptable because the name is implied by the fact that it should be naturally found in the reading order. Some screen readers choose to not convey the name in these cases, likely in an effort to reduce verbosity.

AT Browser Has Support Output Dragon Naturally Speaking Chrome yes

Result: (pass)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Dragon Naturally Speaking and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: checkbox was checked
- Command Notes: said "click yes"

JAWS Chrome yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Do you approve? group, yes, checkbox, not checked."
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Insert + F3 (Open element list)
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Insert + F3 (Open element list)
    - After issuing the command, virtual focus should be: na
  6. Record results for the relevant expectations
- Output: "Do you approve, yes checkbox not checked"

JAWS Edge yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Do you approve? group, yes, checkbox, not checked."
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Insert + F3 (Open element list)
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Insert + F3 (Open element list)
    - After issuing the command, virtual focus should be: na
  6. Record results for the relevant expectations
- Output: "Do you approve, yes checkbox not checked"

JAWS Firefox yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "do you approve? yes, yes, checkbox, not checked"
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Insert + F3 (Open element list)
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Insert + F3 (Open element list)
    - After issuing the command, virtual focus should be: na
  6. Record results for the relevant expectations
- Output: "do you approve? yes check box not checked"

Narrator Edge yes

Result: (pass)
- Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forward to `input[type="checkbox"]`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, unchecked"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, unchecked"
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, unchecked"

NVDA Chrome yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "checkbox, not checked, yes, checkbox, not checked, no, checkbox, not checked, maybe"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "do you approve? grouping, yes, checkbox not checked"
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "do you approve, grouping, yes, checkbox, not checked"
Result: (pass)
- Test Case: Use NVDA + F7 (Open Elements List)
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: NVDA + F7 (Open Elements List)
    - After issuing the command, virtual focus should be: na
  6. Record results for the relevant expectations
- Output: "unlabeled; check box; not checked; Yes"

NVDA Edge yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "checkbox, not checked, yes, checkbox, not checked, no, checkbox, not checked, maybe"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "do you approve? grouping, yes, checkbox not checked"
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "do you approve, grouping, yes, checkbox, not checked"
Result: (pass)
- Test Case: Use NVDA + F7 (Open Elements List)
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: NVDA + F7 (Open Elements List)
    - After issuing the command, virtual focus should be: na
  6. Record results for the relevant expectations
- Output: "unlabeled; check box; not checked; Yes"

NVDA Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "clickable, yes, checkbox, not checked, clickable, no, checkbox, not checked, clickable, maybe, checkbox, not checked"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "clickable, yes, checkbox, not checked"
Result: (pass)
- Test Case: Use f (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: f (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "clickable, yes, checkbox, not checked"
Result: (pass)
- Test Case: Use NVDA + F7 (Open Elements List)
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: NVDA + F7 (Open Elements List)
    - After issuing the command, virtual focus should be: na
  6. Record results for the relevant expectations
- Output: "yes; check box; not checked"

Orca Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked, no, checkbox, not checked, maybe, checkbox, not checked."
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Do you approve? Panel, yes, checkbox, not checked"
Result: (pass)
- Test Case: Use Tab (Next form field) to navigate forward to `input[type="checkbox"]`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Next form field)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, not checked"

TalkBack Chrome yes

Result: (pass)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "not checked, yes, checkbox"
Result: (pass)
- Test Case: Use Swipe down (alt+c) (next control (correct reading control must be selected)) to navigate forward to `input[type="checkbox"]`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe down (alt+c) (next control (correct reading control must be selected))
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "not checked, yes, checkbox"

Voice Access (Android) Chrome yes

Result: (pass)
- Test Case: Use "Tap <text>" or just "<text>" (Activate item by name)
  1. Launch Voice Access (Android) and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Tap <text>" or just "<text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: checkbox was checked
- Command Notes: said "tap yes"

Voice Control (iOS) Safari yes

Result: (pass)
- Test Case: Use "Tap <text>" (Activate item by name)
  1. Launch Voice Control (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Tap <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: checkbox was activated
- Command Notes: said "tap yes"

Voice Control (MacOS) Safari none

Result: (fail)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Voice Control (MacOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: command was not recognized
- Command Notes: said "click yes"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. VoiceOver (iOS) Safari yes

Result: (pass)
- Test Case: Use Swipe Right (Next item) to navigate forward to `input[type="checkbox"]`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, checkbox, unchecked"
Result: (pass)
- Test Case: Use Swipe down (next form control (correct item type must be selected)) to navigate forward to `input[type="checkbox"]`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe down (next form control (correct item type must be selected))
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "do you approve? yes, checkbox, unchecked"

VoiceOver (macOS) Safari yes

Result: (pass)
- Test Case: Use VO + Right arrow (Read next item) to navigate forward to `input[type="checkbox"]`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "yes, unchecked, checkbox"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `input[type="checkbox"]`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Yes, unchecked, checkbox, do you approve?"

Windows Speech Recognition Edge unknown - Windows Speech Recognition Chrome yes

Result: (pass)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Windows Speech Recognition and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:input[type="checkbox"]
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: input was activated
- Command Notes: said "click yes"

Windows Voice Access Edge unknown - Windows Voice Access Chrome unknown - Windows Keyboard Chrome not applicable - Windows Keyboard Firefox not applicable - Windows Keyboard Edge not applicable - Mac Keyboard Chrome not applicable - Mac Keyboard Safari not applicable - iOS Keyboard Safari not applicable - Android Keyboard Chrome not applicable -

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/tech__html__input__input-checkbox below:

Test: Basic html checkbox test

Showing content from https://a11ysupport.io/tests/techhtmlinput__input-checkbox below: