RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/techhtmldl-basic below:

Test: HTML basic description list test

All of the listed commands must pass for the expectation to pass.

AT Browser Has Support Output Dragon Naturally Speaking Chrome not applicable - JAWS Chrome yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "definition list of 3 items"
Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"
Result: (pass)
- Test Case: Use Up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"
Result: (pass)
- Test Case: Use Up arrow (Read previous item) to navigate backwards to the start of `dl`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Read previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "definition list of 3 items"

JAWS Edge yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "definition list of 3 items"
Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"
Result: (pass)
- Test Case: Use Up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"
Result: (pass)
- Test Case: Use Up arrow (Read previous item) to navigate backwards to the start of `dl`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Read previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "definition list of 3 items"

JAWS Firefox yes

Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "definition list of 3 items"
Result: (pass)
- Test Case: Use Down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"
Result: (pass)
- Test Case: Use Up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list end"
Result: (pass)
- Test Case: Use Up arrow (Read previous item) to navigate backwards to the start of `dl`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Read previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "definition list of 3 items"

Narrator Edge none

Result: (fail)
- Test Case: Use Down arrow (Jump to next item (scan mode)) while at the start of `dl`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: start of target
    - Keyboard focus is: start of target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "Green"
Result: (fail)
- Test Case: Use Narrator + 0 (Read item (advanced)) while at the start of `dl`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: start of target
    - Keyboard focus is: start of target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Narrator + 0 (Read item (advanced))
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "no advanced information available"
Result: (fail)
- Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forwards to the end of `dl`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "some other content"
Result: (fail)
- Test Case: Use Up arrow (Jump to previous item (scan mode)) to navigate backwards to the end of `dl`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Up arrow (Jump to previous item (scan mode))
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "And possibly white"
Result: (fail)
- Test Case: Use Narrator + 0 (Read item (advanced)) while at the end of `dl`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: end of target
    - Keyboard focus is: end of target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Narrator + 0 (Read item (advanced))
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "no advanced information available"

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. NVDA Chrome yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "list with 6 items, Green"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "out of list, some other content"
Result: (pass)
- Test Case: Use up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list with 6 items, and possibly white"
Result: (pass)
- Test Case: Use up arrow (Read previous item) to navigate backwards out of `dl`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: before target
  6. Record results for the relevant expectations
- Output: "out of list, these colors match well together"

NVDA Edge yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "list with 6 items, Green"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "out of list, some other content"
Result: (pass)
- Test Case: Use up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list with 6 items, and possibly white"
Result: (pass)
- Test Case: Use up arrow (Read previous item) to navigate backwards out of `dl`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: before target
  6. Record results for the relevant expectations
- Output: "out of list, these colors match well together"

NVDA Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "list with 6 items. Green"
Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "out of list, some other content"
Result: (pass)
- Test Case: Use up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "list with 6 items, and possibly white"
Result: (pass)
- Test Case: Use up arrow (Read previous item) to navigate backwards out of `dl`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: before target
  6. Record results for the relevant expectations
- Output: "out of list, these colors match well together"

Orca Firefox none

Result: (fail)
- Test Case: Use down arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "green"
Result: (fail)
- Test Case: Use down arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "some other content"
Result: (fail)
- Test Case: Use up arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "and possibly white"
Result: (fail)
- Test Case: Use up arrow (Read previous item) to navigate backwards to the start of `dl`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: up arrow (Read previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "These colors match well together"

Result: (fail)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to the start of `dl`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "Green"
Result: (fail)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forwards to the end of `dl`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "Some other content"
Result: (fail)
- Test Case: Use Swipe left (or alt+left arrow) (Read previous item) to navigate backwards to the end of `dl`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe left (or alt+left arrow) (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "And possibly white."
Result: (fail)
- Test Case: Use Swipe left (or alt+left arrow) (Read previous item) to navigate backwards to the start of `dl`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe left (or alt+left arrow) (Read previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "these colors match well together"

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. Voice Access (Android) Chrome not applicable - Voice Control (iOS) Safari not applicable - Voice Control (MacOS) Safari not applicable - VoiceOver (iOS) Safari yes

Result: (pass)
- Test Case: Use Swipe Right (Next item) to navigate forward to the start of `dl`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "Green, definition list start, term"
Result: (pass)
- Test Case: Use Swipe Right (Next item) to navigate forwards to the end of `dl`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "and possibly white, definition list end, definition"
Result: (pass)
- Test Case: Use Swipe Left (Previous item) to navigate backwards to the end of `dl`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Left (Previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "And possibly white, definition list end, definition"
Result: (pass)
- Test Case: Use Swipe Left (Previous item) to navigate backwards to the start of `dl`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Left (Previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "green, definition list start, term"

VoiceOver (macOS) Safari yes

Result: (pass)
- Test Case: Use VO + Right arrow (Read next item) to navigate forward to the start of `dl`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "description list, 3 items"
Result: (pass)
- Test Case: Use VO + Right arrow (Read next item) to navigate forwards to the end of `dl`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "end of description list"
Result: (pass)
- Test Case: Use VO + Left Arrow (Read previous item) to navigate backwards to the end of `dl`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: after target
    - Keyboard focus is: after target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Left Arrow (Read previous item)
    - After issuing the command, virtual focus should be: end of target
  6. Record results for the relevant expectations
- Output: "end of description list"
Result: (pass)
- Test Case: Use VO + Left Arrow (Read previous item) to navigate backwards to the start of `dl`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:dl
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: within target
    - Keyboard focus is: within target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Left Arrow (Read previous item)
    - After issuing the command, virtual focus should be: start of target
  6. Record results for the relevant expectations
- Output: "description list, 3 items"

Windows Speech Recognition Edge not applicable - Windows Speech Recognition Chrome not applicable - Windows Voice Access Edge not applicable - Windows Voice Access Chrome not applicable - Windows Keyboard Chrome not applicable - Windows Keyboard Firefox not applicable - Windows Keyboard Edge not applicable - Mac Keyboard Chrome not applicable - Mac Keyboard Safari not applicable - iOS Keyboard Safari not applicable - Android Keyboard Chrome not applicable -

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/tech__html__dl-basic below:

Test: HTML basic description list test

Showing content from https://a11ysupport.io/tests/techhtmldl-basic below: