Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/tech__aria__aria-colcount below:

Test: aria-colcount attribute | Accessibility Support

Screen readers should not attempt to calculate the column count when it is unknown

Just one of the listed commands must pass for the expectation to pass.

ARIA 1.1 spec: "If the total number of columns is unknown, authors MUST set the value of aria-colcount to -1 to indicate that the value should not be calculated by the user agent."

• Result: (fail)
  • Test Case: Use Down arrow (Read next item) to navigate forward to `#table2`
    1. Launch JAWS and Chrome.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: Down arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table with 4 of minus 1 columns and 6 of 6 rows"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use Down arrow (Read next item) to navigate forward to `#table2`
    1. Launch JAWS and Edge.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: Down arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table with 4 of minus 1 columns and 6 of 6 rows"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use Down arrow (Read next item) to navigate forward to `#table2`
    1. Launch JAWS and Firefox.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: Down arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table with 4 columns and 6 rows"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forward to `#table2`
    1. Launch Narrator and Edge.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: Down arrow (Jump to next item (scan mode))
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Enter table Table 2, 6 by zero, Date"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use down arrow (Read next item) to navigate forward to `#table2`
    1. Launch NVDA and Chrome.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: down arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table with 6 rows and minus 1 columns, Table 2"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use down arrow (Read next item) to navigate forward to `#table2`
    1. Launch NVDA and Edge.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: down arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table with 6 rows and minus 1 columns, Table 2"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use down arrow (Read next item) to navigate forward to `#table2`
    1. Launch NVDA and Firefox.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: down arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table with 6 rows and minus 1 columns, Table 2"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `#table2`
    1. Launch TalkBack and Chrome.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Date, column header, Row 1, In table Table 2, 6 rows 4 columns"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use Swipe Right (Next item) to navigate forward to `#table2`
    1. Launch VoiceOver (iOS) and Safari.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: Swipe Right (Next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table 2, Date, Row header, Column header, Row 1, Column 1, Table start, 6 rows 4 columns"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

• Result: (fail)
  • Test Case: Use VO + Right arrow (Read next item) to navigate forward to `#table2`
    1. Launch VoiceOver (macOS) and Safari.
    2. Navigate to the test page.
    3. Find the target element(s) that you will test against. Identify all elements that match this selector:#table2
       • If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
    4. Position and configure the screen reader so that the following conditions are met
       • Virtual focus is: before target
       • Keyboard focus is: before target
       • Mode is: auto (do not explicitly change the mode)
    5. Issue the command: VO + Right arrow (Read next item)
       • After issuing the command, virtual focus should be: target
    6. Record results for the relevant expectations
  • Output: "Table 2, table 4 columns, 6 rows"
  • Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4