RetroSearch Browse

Home - News ( United States | United Kingdom | Italy | Germany ) - Football scores

Showing content from https://a11ysupport.io/tests/html_label_element_implicit below:

Test: Implicit label | Accessibility Support

Just one of the listed commands must pass for the expectation to pass.

AT Browser Has Support Output Dragon Naturally Speaking Chrome none

Result: (fail)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Dragon Naturally Speaking and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: (input was not focused)
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. JAWS Chrome yes

Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch JAWS and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit, type in text"

JAWS Edge yes

Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch JAWS and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit, type in text"

JAWS Firefox yes

Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch JAWS and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit, type in text"

Narrator Edge yes

Result: (pass)
- Test Case: Use Down arrow (Jump to next item (scan mode)) to navigate forward to `label`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Down arrow (Jump to next item (scan mode))
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch Narrator and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit"

NVDA Chrome yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `label`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch NVDA and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit, blank"

NVDA Edge yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `label`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch NVDA and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit, blank"

NVDA Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `label`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Clickable, Your name, edit, has auto complete"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch NVDA and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit, has auto complete, blank"

Orca Firefox yes

Result: (pass)
- Test Case: Use down arrow (Read next item) to navigate forward to `label`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: down arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "your name, entry"
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch Orca and Firefox.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "your name, entry, focus mode"

TalkBack Chrome yes

Result: (pass)
- Test Case: Use Swipe right (or alt+right arrow) (Read next item) to navigate forward to `label`
  1. Launch TalkBack and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe right (or alt+right arrow) (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, edit"

Voice Access (Android) Chrome yes

Result: (pass)
- Test Case: Use "Tap <text>" or just "<text>" (Activate item by name)
  1. Launch Voice Access (Android) and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Tap <text>" or just "<text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: The label and the input were both flagged with a number for selection. This is the same behavior as the explicit label.
- Command Notes: said "tap your name"

Voice Control (iOS) Safari yes

Result: (pass)
- Test Case: Use "Tap <text>" (Activate item by name)
  1. Launch Voice Control (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Tap <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: input was focused
- Command Notes: said "tap your name"

Voice Control (MacOS) Safari none

Result: (fail)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Voice Control (MacOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: input was not focused
- Command Notes: said "click your name". Also tried "show names"
- Grading note: This command may be expected to fail. This result simply indicates that it did not yield support.

Grading Note: There is no known/documented support. There may still be support for this expectation, but it is undocumented. If this is the case, please report this issue. VoiceOver (iOS) Safari yes

Result: (pass)
- Test Case: Use Swipe Right (Next item) to navigate forward to `label`
  1. Launch VoiceOver (iOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Swipe Right (Next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: "Your name, text field"

VoiceOver (macOS) Safari yes

Result: (pass)
- Test Case: Use VO + Right arrow (Read next item) to navigate forward to `label`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: VO + Right arrow (Read next item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: your name, edit text
Result: (pass)
- Test Case: Use Tab (Read next focusable item) to navigate forward to `label`
  1. Launch VoiceOver (macOS) and Safari.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Position and configure the screen reader so that the following conditions are met
    - Virtual focus is: before target
    - Keyboard focus is: before target
    - Mode is: auto (do not explicitly change the mode)
  5. Issue the command: Tab (Read next focusable item)
    - After issuing the command, virtual focus should be: target
  6. Record results for the relevant expectations
- Output: your name, edit text

Windows Speech Recognition Edge yes

Result: (pass)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Windows Speech Recognition and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: role was activated
- Command Notes: said "click your name"

Windows Speech Recognition Chrome yes

Result: (pass)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Windows Speech Recognition and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: role was activated
- Command Notes: said "click your name"

Windows Voice Access Edge yes

Result: (pass)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Windows Voice Access and Edge.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: role was activated
- Command Notes: said "click your name"

Windows Voice Access Chrome yes

Result: (pass)
- Test Case: Use "Click <text>" (Activate item by name)
  1. Launch Windows Voice Access and Chrome.
  2. Navigate to the test page.
  3. Find the target element(s) that you will test against. Identify all elements that match this selector:label
    - If multiple elements match the selector, repeat this test for all instances. However, choose a single instance to report against. If you feel that the selector should be more specific, please open a GitHub Issue.
  4. Issue the command: "Click <text>" (Activate item by name)
  5. Record results for the relevant expectations
- Output: role was activated
- Command Notes: said "click your name"

Windows Keyboard Chrome not applicable - Windows Keyboard Firefox not applicable - Windows Keyboard Edge not applicable - Mac Keyboard Chrome not applicable - Mac Keyboard Safari not applicable - iOS Keyboard Safari not applicable - Android Keyboard Chrome not applicable -

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4