Serializable
, Cloneable
, Comparable<Calendar>
public class GregorianCalendar extends Calendar
GregorianCalendar
is a concrete subclass of
Calendar
and provides the standard calendar system used by most of the world.
GregorianCalendar
is a hybrid calendar that supports both the Julian and Gregorian calendar systems with the support of a single discontinuity, which corresponds by default to the Gregorian date when the Gregorian calendar was instituted (October 15, 1582 in some countries, later in others). The cutover date may be changed by the caller by calling setGregorianChange()
.
Historically, in those countries which adopted the Gregorian calendar first, October 4, 1582 (Julian) was thus followed by October 15, 1582 (Gregorian). This calendar models this correctly. Before the Gregorian cutover, GregorianCalendar
implements the Julian calendar. The only difference between the Gregorian and the Julian calendar is the leap year rule. The Julian calendar specifies leap years every four years, whereas the Gregorian calendar omits century years which are not divisible by 400.
GregorianCalendar
implements proleptic Gregorian and Julian calendars. That is, dates are computed by extrapolating the current rules indefinitely far backward and forward in time. As a result, GregorianCalendar
may be used for all years to generate meaningful and consistent results. However, dates obtained using GregorianCalendar
are historically accurate only from March 1, 4 AD onward, when modern Julian calendar rules were adopted. Before this date, leap year rules were applied irregularly, and before 45 BC the Julian calendar did not even exist.
Prior to the institution of the Gregorian calendar, New Year's Day was March 25. To avoid confusion, this calendar always uses January 1. A manual adjustment may be made if desired for dates that are prior to the Gregorian changeover and which fall between January 1 and March 24.
Week Of Year and Week YearValues calculated for the WEEK_OF_YEAR
field range from 1 to 53. The first week of a calendar year is the earliest seven day period starting on getFirstDayOfWeek()
that contains at least getMinimalDaysInFirstWeek()
days from that year. It thus depends on the values of getMinimalDaysInFirstWeek()
, getFirstDayOfWeek()
, and the day of the week of January 1. Weeks between week 1 of one year and week 1 of the following year (exclusive) are numbered sequentially from 2 to 52 or 53 (except for year(s) involved in the Julian-Gregorian transition).
The getFirstDayOfWeek()
and getMinimalDaysInFirstWeek()
values are initialized using locale-dependent resources when constructing a GregorianCalendar
. The week determination is compatible with the ISO 8601 standard when getFirstDayOfWeek()
is MONDAY
and getMinimalDaysInFirstWeek()
is 4, which values are used in locales where the standard is preferred. These values can explicitly be set by calling setFirstDayOfWeek()
and setMinimalDaysInFirstWeek()
.
A week year is in sync with a WEEK_OF_YEAR
cycle. All weeks between the first and last weeks (inclusive) have the same week year value. Therefore, the first and last days of a week year may have different calendar year values.
For example, January 1, 1998 is a Thursday. If getFirstDayOfWeek()
is MONDAY
and getMinimalDaysInFirstWeek()
is 4 (ISO 8601 standard compatible setting), then week 1 of 1998 starts on December 29, 1997, and ends on January 4, 1998. The week year is 1998 for the last three days of calendar year 1997. If, however, getFirstDayOfWeek()
is SUNDAY
, then week 1 of 1998 starts on January 4, 1998, and ends on January 10, 1998; the first three days of 1998 then are part of week 53 of 1997 and their week year is 1997.
Values calculated for the WEEK_OF_MONTH
field range from 0 to 6. Week 1 of a month (the days with WEEK_OF_MONTH = 1
) is the earliest set of at least getMinimalDaysInFirstWeek()
contiguous days in that month, ending on the day before getFirstDayOfWeek()
. Unlike week 1 of a year, week 1 of a month may be shorter than 7 days, need not start on getFirstDayOfWeek()
, and will not include days of the previous month. Days of a month before week 1 have a WEEK_OF_MONTH
of 0.
For example, if getFirstDayOfWeek()
is SUNDAY
and getMinimalDaysInFirstWeek()
is 4, then the first week of January 1998 is Sunday, January 4 through Saturday, January 10. These days have a WEEK_OF_MONTH
of 1. Thursday, January 1 through Saturday, January 3 have a WEEK_OF_MONTH
of 0. If getMinimalDaysInFirstWeek()
is changed to 3, then January 1 through January 3 have a WEEK_OF_MONTH
of 1.
The clear
method sets calendar field(s) undefined. GregorianCalendar
uses the following default value for each calendar field if its value is undefined.
ERA
AD
YEAR
1970
MONTH
JANUARY
DAY_OF_MONTH
1
DAY_OF_WEEK
the first day of week
WEEK_OF_MONTH
0
DAY_OF_WEEK_IN_MONTH
1
AM_PM
AM
HOUR, HOUR_OF_DAY, MINUTE, SECOND, MILLISECOND
0
Default values are not applicable for the fields not listed above.
Example:
// get the supported ids for GMT-08:00 (Pacific Standard Time) String[] ids = TimeZone.getAvailableIDs(-8 * 60 * 60 * 1000); // if no ids were returned, something is wrong. get out. if (ids.length == 0) System.exit(0); // begin output System.out.println("Current Time"); // create a Pacific Standard Time time zone SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]); // set up rules for Daylight Saving Time pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000); pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000); // create a GregorianCalendar with the Pacific Daylight time zone // and the current date and time Calendar calendar = new GregorianCalendar(pdt); Date trialTime = new Date(); calendar.setTime(trialTime); // print out a bunch of interesting things System.out.println("ERA: " + calendar.get(Calendar.ERA)); System.out.println("YEAR: " + calendar.get(Calendar.YEAR)); System.out.println("MONTH: " + calendar.get(Calendar.MONTH)); System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR)); System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH)); System.out.println("DATE: " + calendar.get(Calendar.DATE)); System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH)); System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR)); System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK)); System.out.println("DAY_OF_WEEK_IN_MONTH: " + calendar.get(Calendar.DAY_OF_WEEK_IN_MONTH)); System.out.println("AM_PM: " + calendar.get(Calendar.AM_PM)); System.out.println("HOUR: " + calendar.get(Calendar.HOUR)); System.out.println("HOUR_OF_DAY: " + calendar.get(Calendar.HOUR_OF_DAY)); System.out.println("MINUTE: " + calendar.get(Calendar.MINUTE)); System.out.println("SECOND: " + calendar.get(Calendar.SECOND)); System.out.println("MILLISECOND: " + calendar.get(Calendar.MILLISECOND)); System.out.println("ZONE_OFFSET: " + (calendar.get(Calendar.ZONE_OFFSET)/(60*60*1000))); System.out.println("DST_OFFSET: " + (calendar.get(Calendar.DST_OFFSET)/(60*60*1000))); System.out.println("Current Time, with hour reset to 3"); calendar.clear(Calendar.HOUR_OF_DAY); // so doesn't override calendar.set(Calendar.HOUR, 3); System.out.println("ERA: " + calendar.get(Calendar.ERA)); System.out.println("YEAR: " + calendar.get(Calendar.YEAR)); System.out.println("MONTH: " + calendar.get(Calendar.MONTH)); System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR)); System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH)); System.out.println("DATE: " + calendar.get(Calendar.DATE)); System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH)); System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR)); System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK)); System.out.println("DAY_OF_WEEK_IN_MONTH: " + calendar.get(Calendar.DAY_OF_WEEK_IN_MONTH)); System.out.println("AM_PM: " + calendar.get(Calendar.AM_PM)); System.out.println("HOUR: " + calendar.get(Calendar.HOUR)); System.out.println("HOUR_OF_DAY: " + calendar.get(Calendar.HOUR_OF_DAY)); System.out.println("MINUTE: " + calendar.get(Calendar.MINUTE)); System.out.println("SECOND: " + calendar.get(Calendar.SECOND)); System.out.println("MILLISECOND: " + calendar.get(Calendar.MILLISECOND)); System.out.println("ZONE_OFFSET: " + (calendar.get(Calendar.ZONE_OFFSET)/(60*60*1000))); // in hours System.out.println("DST_OFFSET: " + (calendar.get(Calendar.DST_OFFSET)/(60*60*1000))); // in hours
TimeZone
, Serialized Form
static int
AD
Value of the ERA
field indicating the common era (Anno Domini), also known as CE.
static int
BC
Value of the ERA
field indicating the period before the common era (before Christ), also known as BCE.
ALL_STYLES, AM, AM_PM, APRIL, areFieldsSet, AUGUST, DATE, DAY_OF_MONTH, DAY_OF_WEEK, DAY_OF_WEEK_IN_MONTH, DAY_OF_YEAR, DECEMBER, DST_OFFSET, ERA, FEBRUARY, FIELD_COUNT, fields, FRIDAY, HOUR, HOUR_OF_DAY, isSet, isTimeSet, JANUARY, JULY, JUNE, LONG, LONG_FORMAT, LONG_STANDALONE, MARCH, MAY, MILLISECOND, MINUTE, MONDAY, MONTH, NARROW_FORMAT, NARROW_STANDALONE, NOVEMBER, OCTOBER, PM, SATURDAY, SECOND, SEPTEMBER, SHORT, SHORT_FORMAT, SHORT_STANDALONE, SUNDAY, THURSDAY, time, TUESDAY, UNDECIMBER, WEDNESDAY, WEEK_OF_MONTH, WEEK_OF_YEAR, YEAR, ZONE_OFFSET
GregorianCalendar()
Constructs a default
GregorianCalendar
using the current time in the default time zone with the default
FORMAT
locale.
GregorianCalendar(int year, int month, int dayOfMonth)
Constructs a GregorianCalendar
with the given date set in the default time zone with the default locale.
GregorianCalendar(int year, int month, int dayOfMonth, int hourOfDay, int minute)
Constructs a GregorianCalendar
with the given date and time set for the default time zone with the default locale.
GregorianCalendar(int year, int month, int dayOfMonth, int hourOfDay, int minute, int second)
Constructs a GregorianCalendar with the given date and time set for the default time zone with the default locale.
GregorianCalendar(Locale aLocale)
Constructs a GregorianCalendar
based on the current time in the default time zone with the given locale.
GregorianCalendar(TimeZone zone)
Constructs a
GregorianCalendar
based on the current time in the given time zone with the default
FORMAT
locale.
GregorianCalendar(TimeZone zone, Locale aLocale)
Constructs a GregorianCalendar
based on the current time in the given time zone with the given locale.
void
add(int field, int amount)
Adds the specified (signed) amount of time to the given calendar field, based on the calendar's rules.
protected void
computeFields()
Converts the time value (millisecond offset from the
Epoch) to calendar field values.
protected void
computeTime()
Converts calendar field values to the time value (millisecond offset from the
Epoch).
boolean
equals(Object obj)
Compares this GregorianCalendar
to the specified Object
.
static GregorianCalendar
from(ZonedDateTime zdt)
Obtains an instance of GregorianCalendar
with the default locale from a ZonedDateTime
object.
int
getActualMaximum(int field)
Returns the maximum value that this calendar field could have, taking into consideration the given time value and the current values of the
getFirstDayOfWeek
,
getMinimalDaysInFirstWeek
,
getGregorianChange
and
getTimeZone
methods.
int
getActualMinimum(int field)
Returns the minimum value that this calendar field could have, taking into consideration the given time value and the current values of the
getFirstDayOfWeek
,
getMinimalDaysInFirstWeek
,
getGregorianChange
and
getTimeZone
methods.
String
getCalendarType()
Returns "gregory"
as the calendar type.
int
getGreatestMinimum(int field)
Returns the highest minimum value for the given calendar field of this GregorianCalendar
instance.
Date
getGregorianChange()
Gets the Gregorian Calendar change date.
int
getLeastMaximum(int field)
Returns the lowest maximum value for the given calendar field of this GregorianCalendar
instance.
int
getMaximum(int field)
Returns the maximum value for the given calendar field of this GregorianCalendar
instance.
int
getMinimum(int field)
Returns the minimum value for the given calendar field of this GregorianCalendar
instance.
int
getWeeksInWeekYear()
Returns the number of weeks in the
week yearrepresented by this
GregorianCalendar
.
int
getWeekYear()
Returns the
week yearrepresented by this
GregorianCalendar
.
int
hashCode()
Generates the hash code for this GregorianCalendar
object.
boolean
isLeapYear(int year)
Determines if the given year is a leap year.
boolean
isWeekDateSupported()
Returns true
indicating this GregorianCalendar
supports week dates.
void
roll(int field, boolean up)
Adds or subtracts (up/down) a single unit of time on the given time field without changing larger fields.
void
roll(int field, int amount)
Adds a signed amount to the specified calendar field without changing larger fields.
void
setGregorianChange(Date date)
Sets the GregorianCalendar
change date.
void
setWeekDate(int weekYear, int weekOfYear, int dayOfWeek)
Sets this
GregorianCalendar
to the date given by the date specifiers -
weekYear
,
weekOfYear
, and
dayOfWeek
.
ZonedDateTime
toZonedDateTime()
Converts this object to a ZonedDateTime
that represents the same point on the time-line as this GregorianCalendar
.
after, before, clear, clear, clone, compareTo, complete, get, getAvailableCalendarTypes, getAvailableLocales, getDisplayName, getDisplayNames, getFirstDayOfWeek, getInstance, getInstance, getInstance, getInstance, getMinimalDaysInFirstWeek, getTime, getTimeInMillis, getTimeZone, internalGet, isLenient, isSet, set, set, set, set, setFirstDayOfWeek, setLenient, setMinimalDaysInFirstWeek, setTime, setTimeInMillis, setTimeZone, toInstant, toString
public static final int BC
Value of the ERA
field indicating the period before the common era (before Christ), also known as BCE. The sequence of years at the transition from BC
to AD
is ..., 2 BC, 1 BC, 1 AD, 2 AD,...
Calendar.ERA
, Constant Field Values
public static final int AD
Value of the ERA
field indicating the common era (Anno Domini), also known as CE. The sequence of years at the transition from BC
to AD
is ..., 2 BC, 1 BC, 1 AD, 2 AD,...
Calendar.ERA
, Constant Field Values
public GregorianCalendar()
Constructs a default
GregorianCalendar
using the current time in the default time zone with the default
FORMAT
locale.
(
TimeZone zone)Constructs a
GregorianCalendar
based on the current time in the given time zone with the default
FORMAT
locale.
zone
- the given time zone.
(
Locale aLocale)Constructs a GregorianCalendar
based on the current time in the default time zone with the given locale.
aLocale
- the given locale.
Constructs a GregorianCalendar
based on the current time in the given time zone with the given locale.
zone
- the given time zone.
aLocale
- the given locale.
public GregorianCalendar(int year, int month, int dayOfMonth)
Constructs a GregorianCalendar
with the given date set in the default time zone with the default locale.
year
- the value used to set the YEAR
calendar field in the calendar.
month
- the value used to set the MONTH
calendar field in the calendar. Month value is 0-based. e.g., 0 for January.
dayOfMonth
- the value used to set the DAY_OF_MONTH
calendar field in the calendar.
public GregorianCalendar(int year, int month, int dayOfMonth, int hourOfDay, int minute)
Constructs a GregorianCalendar
with the given date and time set for the default time zone with the default locale.
year
- the value used to set the YEAR
calendar field in the calendar.
month
- the value used to set the MONTH
calendar field in the calendar. Month value is 0-based. e.g., 0 for January.
dayOfMonth
- the value used to set the DAY_OF_MONTH
calendar field in the calendar.
hourOfDay
- the value used to set the HOUR_OF_DAY
calendar field in the calendar.
minute
- the value used to set the MINUTE
calendar field in the calendar.
public GregorianCalendar(int year, int month, int dayOfMonth, int hourOfDay, int minute, int second)
Constructs a GregorianCalendar with the given date and time set for the default time zone with the default locale.
year
- the value used to set the YEAR
calendar field in the calendar.
month
- the value used to set the MONTH
calendar field in the calendar. Month value is 0-based. e.g., 0 for January.
dayOfMonth
- the value used to set the DAY_OF_MONTH
calendar field in the calendar.
hourOfDay
- the value used to set the HOUR_OF_DAY
calendar field in the calendar.
minute
- the value used to set the MINUTE
calendar field in the calendar.
second
- the value used to set the SECOND
calendar field in the calendar.
(
Date date)Sets the
GregorianCalendar
change date. This is the point when the switch from Julian dates to Gregorian dates occurred. Default is October 15, 1582 (Gregorian). Previous to this, dates will be in the Julian calendar.
To obtain a pure Julian calendar, set the change date to Date(Long.MAX_VALUE)
. To obtain a pure Gregorian calendar, set the change date to Date(Long.MIN_VALUE)
.
date
- the given Gregorian cutover date.
()
Gets the Gregorian Calendar change date. This is the point when the switch from Julian dates to Gregorian dates occurred. Default is October 15, 1582 (Gregorian). Previous to this, dates will be in the Julian calendar.
GregorianCalendar
object.
public boolean isLeapYear(int year)
Determines if the given year is a leap year. Returns true
if the given year is a leap year. To specify BC year numbers, 1 - year number
must be given. For example, year BC 4 is specified as -3.
year
- the given year.
true
if the given year is a leap year; false
otherwise.
()
Returns "gregory"
as the calendar type.
getCalendarType
in class Calendar
"gregory"
Locale.Builder.setLocale(Locale)
, Locale.Builder.setUnicodeLocaleKeyword(String, String)
(
Object obj)Compares this
GregorianCalendar
to the specified
Object
. The result is
true
if and only if the argument is a
GregorianCalendar
object that represents the same time value (millisecond offset from the
Epoch) under the same
Calendar
parameters and Gregorian change date as this object.
equals
in class Calendar
obj
- the object to compare with.
true
if this object is equal to obj
; false
otherwise.
Calendar.compareTo(Calendar)
public int hashCode()
Generates the hash code for this GregorianCalendar
object.
hashCode
in class Calendar
Object.equals(java.lang.Object)
, System.identityHashCode(java.lang.Object)
public void add(int field, int amount)
Adds the specified (signed) amount of time to the given calendar field, based on the calendar's rules.
Add rule 1. The value of field
after the call minus the value of field
before the call is amount
, modulo any overflow that has occurred in field
. Overflow occurs when a field value exceeds its range and, as a result, the next larger field is incremented or decremented and the field value is adjusted back into its range.
Add rule 2. If a smaller field is expected to be invariant, but it is impossible for it to be equal to its prior value because of changes in its minimum or maximum after field
is changed, then its value is adjusted to be as close as possible to its expected value. A smaller field represents a smaller unit of time. HOUR
is a smaller field than DAY_OF_MONTH
. No adjustment is made to smaller fields that are not expected to be invariant. The calendar system determines what fields are expected to be invariant.
add
in class Calendar
field
- the calendar field.
amount
- the amount of date or time to be added to the field.
IllegalArgumentException
- if field
is ZONE_OFFSET
, DST_OFFSET
, or unknown, or if any calendar fields have out-of-range values in non-lenient mode.
Calendar.roll(int,int)
, Calendar.set(int,int)
public void roll(int field, boolean up)
Example: Consider a GregorianCalendar
originally set to December 31, 1999. Calling roll(Calendar.MONTH, true)
sets the calendar to January 31, 1999. The YEAR
field is unchanged because it is a larger field than MONTH
.
roll
in class Calendar
up
- indicates if the value of the specified calendar field is to be rolled up or rolled down. Use true
if rolling up, false
otherwise.
field
- the time field.
IllegalArgumentException
- if field
is ZONE_OFFSET
, DST_OFFSET
, or unknown, or if any calendar fields have out-of-range values in non-lenient mode.
add(int,int)
, Calendar.set(int,int)
public void roll(int field, int amount)
Adds a signed amount to the specified calendar field without changing larger fields. A negative roll amount means to subtract from field without changing larger fields. If the specified amount is 0, this method performs nothing.
This method calls Calendar.complete()
before adding the amount so that all the calendar fields are normalized. If there is any calendar field having an out-of-range value in non-lenient mode, then an IllegalArgumentException
is thrown.
Example: Consider a GregorianCalendar
originally set to August 31, 1999. Calling roll(Calendar.MONTH, 8)
sets the calendar to April 30, 1999. Using a GregorianCalendar
, the DAY_OF_MONTH
field cannot be 31 in the month April. DAY_OF_MONTH
is set to the closest possible value, 30. The YEAR
field maintains the value of 1999 because it is a larger field than MONTH
.
Example: Consider a GregorianCalendar
originally set to Sunday June 6, 1999. Calling roll(Calendar.WEEK_OF_MONTH, -1)
sets the calendar to Tuesday June 1, 1999, whereas calling add(Calendar.WEEK_OF_MONTH, -1)
sets the calendar to Sunday May 30, 1999. This is because the roll rule imposes an additional constraint: The MONTH
must not change when the WEEK_OF_MONTH
is rolled. Taken together with add rule 1, the resultant date must be between Tuesday June 1 and Saturday June 5. According to add rule 2, the DAY_OF_WEEK
, an invariant when changing the WEEK_OF_MONTH
, is set to Tuesday, the closest possible value to Sunday (where Sunday is the first day of the week).
roll
in class Calendar
field
- the calendar field.
amount
- the signed amount to add to field
.
IllegalArgumentException
- if field
is ZONE_OFFSET
, DST_OFFSET
, or unknown, or if any calendar fields have out-of-range values in non-lenient mode.
roll(int,boolean)
, add(int,int)
, Calendar.set(int,int)
public int getMinimum(int field)
getMinimum
in class Calendar
field
- the calendar field.
getMaximum(int)
, getGreatestMinimum(int)
, getLeastMaximum(int)
, getActualMinimum(int)
, getActualMaximum(int)
public int getMaximum(int field)
getMaximum
in class Calendar
field
- the calendar field.
getMinimum(int)
, getGreatestMinimum(int)
, getLeastMaximum(int)
, getActualMinimum(int)
, getActualMaximum(int)
public int getGreatestMinimum(int field)
getGreatestMinimum
in class Calendar
field
- the calendar field.
getMinimum(int)
, getMaximum(int)
, getLeastMaximum(int)
, getActualMinimum(int)
, getActualMaximum(int)
public int getLeastMaximum(int field)
getLeastMaximum
in class Calendar
field
- the calendar field
getMinimum(int)
, getMaximum(int)
, getGreatestMinimum(int)
, getActualMinimum(int)
, getActualMaximum(int)
public int getActualMinimum(int field)
Returns the minimum value that this calendar field could have, taking into consideration the given time value and the current values of the
getFirstDayOfWeek
,
getMinimalDaysInFirstWeek
,
getGregorianChange
and
getTimeZone
methods.
For example, if the Gregorian change date is January 10, 1970 and the date of this GregorianCalendar
is January 20, 1970, the actual minimum value of the DAY_OF_MONTH
field is 10 because the previous date of January 10, 1970 is December 27, 1996 (in the Julian calendar). Therefore, December 28, 1969 to January 9, 1970 don't exist.
getActualMinimum
in class Calendar
field
- the calendar field
GregorianCalendar
getMinimum(int)
, getMaximum(int)
, getGreatestMinimum(int)
, getLeastMaximum(int)
, getActualMaximum(int)
public int getActualMaximum(int field)
Returns the maximum value that this calendar field could have, taking into consideration the given time value and the current values of the
getFirstDayOfWeek
,
getMinimalDaysInFirstWeek
,
getGregorianChange
and
getTimeZone
methods. For example, if the date of this instance is February 1, 2004, the actual maximum value of the
DAY_OF_MONTH
field is 29 because 2004 is a leap year, and if the date of this instance is February 1, 2005, it's 28.
This method calculates the maximum value of WEEK_OF_YEAR
based on the YEAR
(calendar year) value, not the week year. Call getWeeksInWeekYear()
to get the maximum value of WEEK_OF_YEAR
in the week year of this GregorianCalendar
.
getActualMaximum
in class Calendar
field
- the calendar field
GregorianCalendar
getMinimum(int)
, getMaximum(int)
, getGreatestMinimum(int)
, getLeastMaximum(int)
, getActualMinimum(int)
public final boolean isWeekDateSupported()
Returns true
indicating this GregorianCalendar
supports week dates.
isWeekDateSupported
in class Calendar
true
(always)
getWeekYear()
, setWeekDate(int,int,int)
, getWeeksInWeekYear()
public int getWeekYear()
Returns the
week yearrepresented by this
GregorianCalendar
. The dates in the weeks between 1 and the maximum week number of the week year have the same week year value that may be one year before or after the
YEAR
(calendar year) value.
This method calls Calendar.complete()
before calculating the week year.
getWeekYear
in class Calendar
GregorianCalendar
. If the ERA
value is BC
, the year is represented by 0 or a negative number: BC 1 is 0, BC 2 is -1, BC 3 is -2, and so on.
IllegalArgumentException
- if any of the calendar fields is invalid in non-lenient mode.
isWeekDateSupported()
, getWeeksInWeekYear()
, Calendar.getFirstDayOfWeek()
, Calendar.getMinimalDaysInFirstWeek()
public void setWeekDate(int weekYear, int weekOfYear, int dayOfWeek)
Sets this
GregorianCalendar
to the date given by the date specifiers -
weekYear
,
weekOfYear
, and
dayOfWeek
.
weekOfYear
follows the
WEEK_OF_YEAR
numbering
. The
dayOfWeek
value must be one of the
DAY_OF_WEEK
values:
SUNDAY
to
SATURDAY
.
Note that the numeric day-of-week representation differs from the ISO 8601 standard, and that the weekOfYear
numbering is compatible with the standard when getFirstDayOfWeek()
is MONDAY
and getMinimalDaysInFirstWeek()
is 4.
Unlike the set
method, all of the calendar fields and the instant of time value are calculated upon return.
If weekOfYear
is out of the valid week-of-year range in weekYear
, the weekYear
and weekOfYear
values are adjusted in lenient mode, or an IllegalArgumentException
is thrown in non-lenient mode.
setWeekDate
in class Calendar
weekYear
- the week year
weekOfYear
- the week number based on weekYear
dayOfWeek
- the day of week value: one of the constants for the DAY_OF_WEEK
field: SUNDAY
, ..., SATURDAY
.
IllegalArgumentException
- if any of the given date specifiers is invalid, or if any of the calendar fields are inconsistent with the given date specifiers in non-lenient mode
isWeekDateSupported()
, Calendar.getFirstDayOfWeek()
, Calendar.getMinimalDaysInFirstWeek()
public int getWeeksInWeekYear()
Returns the number of weeks in the
week yearrepresented by this
GregorianCalendar
.
For example, if this GregorianCalendar
's date is December 31, 2008 with the ISO 8601 compatible setting, this method will return 53 for the period: December 29, 2008 to January 3, 2010 while getActualMaximum(WEEK_OF_YEAR)
will return 52 for the period: December 31, 2007 to December 28, 2008.
getWeeksInWeekYear
in class Calendar
Calendar.WEEK_OF_YEAR
, getWeekYear()
, getActualMaximum(int)
protected void computeFields()
Converts the time value (millisecond offset from the
Epoch) to calendar field values. The time is
notrecomputed first; to recompute the time, then the fields, call the
complete
method.
computeFields
in class Calendar
Calendar.complete()
protected void computeTime()
Converts calendar field values to the time value (millisecond offset from the
Epoch).
computeTime
in class Calendar
IllegalArgumentException
- if any calendar fields are invalid.
Calendar.complete()
, Calendar.computeFields()
Converts this object to a
ZonedDateTime
that represents the same point on the time-line as this
GregorianCalendar
.
Since this object supports a Julian-Gregorian cutover date and ZonedDateTime
does not, it is possible that the resulting year, month and day will have different values. The result will represent the correct date in the ISO calendar system, which will also be the same value for Modified Julian Days.
Obtains an instance of
GregorianCalendar
with the default locale from a
ZonedDateTime
object.
Since ZonedDateTime
does not support a Julian-Gregorian cutover date and uses ISO calendar system, the return GregorianCalendar is a pure Gregorian calendar and uses ISO 8601 standard for week definitions, which has MONDAY
as the FirstDayOfWeek
and 4
as the value of the MinimalDaysInFirstWeek
.
ZoneDateTime
can store points on the time-line further in the future and further in the past than GregorianCalendar
. In this scenario, this method will throw an IllegalArgumentException
exception.
zdt
- the zoned date-time object to convert
NullPointerException
- if zdt
is null
IllegalArgumentException
- if the zoned date-time is too large to represent as a GregorianCalendar
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4