You can use the AWS Command Line Interface (AWS CLI) to launch, list, and delete Amazon Elastic Compute Cloud (Amazon EC2) instances. If you launch an instance that isn't within the AWS Free Tier, you are billed after you launch the instance and charged for the time that the instance is running, even if it remains idle.
PrerequisitesTo run the ec2 commands in this topic, you need to:
To launch an Amazon EC2 instance using the AMI you selected, use the aws ec2 run-instances command. You can launch the instance into a virtual private cloud (VPC).
Initially, your instance appears in the pending state, but changes to the running state after a few minutes.
The following example shows how to launch a t2.micro instance in the specified subnet of a VPC. Replace the italicized parameter values with your own.
$ aws ec2 run-instances --image-id ami-xxxxxxxx --count 1 --instance-type t2.micro --key-name MyKeyPair --security-group-ids sg-903004f8 --subnet-id subnet-6e7f829e
{
"OwnerId": "123456789012",
"ReservationId": "r-5875ca20",
"Groups": [
{
"GroupName": "my-sg",
"GroupId": "sg-903004f8"
}
],
"Instances": [
{
"Monitoring": {
"State": "disabled"
},
"PublicDnsName": null,
"Platform": "windows",
"State": {
"Code": 0,
"Name": "pending"
},
"EbsOptimized": false,
"LaunchTime": "2013-07-19T02:42:39.000Z",
"PrivateIpAddress": "10.0.1.114",
"ProductCodes": [],
"VpcId": "vpc-1a2b3c4d",
"InstanceId": "i-5203422c",
"ImageId": "ami-173d747e",
"PrivateDnsName": "ip-10-0-1-114.ec2.internal",
"KeyName": "MyKeyPair",
"SecurityGroups": [
{
"GroupName": "my-sg",
"GroupId": "sg-903004f8"
}
],
"ClientToken": null,
"SubnetId": "subnet-6e7f829e",
"InstanceType": "t2.micro",
"NetworkInterfaces": [
{
"Status": "in-use",
"SourceDestCheck": true,
"VpcId": "vpc-1a2b3c4d",
"Description": "Primary network interface",
"NetworkInterfaceId": "eni-a7edb1c9",
"PrivateIpAddresses": [
{
"PrivateDnsName": "ip-10-0-1-114.ec2.internal",
"Primary": true,
"PrivateIpAddress": "10.0.1.114"
}
],
"PrivateDnsName": "ip-10-0-1-114.ec2.internal",
"Attachment": {
"Status": "attached",
"DeviceIndex": 0,
"DeleteOnTermination": true,
"AttachmentId": "eni-attach-52193138",
"AttachTime": "2013-07-19T02:42:39.000Z"
},
"Groups": [
{
"GroupName": "my-sg",
"GroupId": "sg-903004f8"
}
],
"SubnetId": "subnet-6e7f829e",
"OwnerId": "123456789012",
"PrivateIpAddress": "10.0.1.114"
}
],
"SourceDestCheck": true,
"Placement": {
"Tenancy": "default",
"GroupName": null,
"AvailabilityZone": "us-west-2b"
},
"Hypervisor": "xen",
"BlockDeviceMappings": [
{
"DeviceName": "/dev/sda1",
"Ebs": {
"Status": "attached",
"DeleteOnTermination": true,
"VolumeId": "vol-877166c8",
"AttachTime": "2013-07-19T02:42:39.000Z"
}
}
],
"Architecture": "x86_64",
"StateReason": {
"Message": "pending",
"Code": "pending"
},
"RootDeviceName": "/dev/sda1",
"VirtualizationType": "hvm",
"RootDeviceType": "ebs",
"Tags": [
{
"Value": "MyInstance",
"Key": "Name"
}
],
"AmiLaunchIndex": 0
}
]
}Each instance that you launch has an associated root device volume. You can use block device mapping to specify additional Amazon Elastic Block Store (Amazon EBS) volumes or instance store volumes to attach to an instance when it's launched.
To add a block device to your instance, specify the --block-device-mappings option when you use run-instances.
The following example parameter provisions a standard Amazon EBS volume that is 20 GB in size, and maps it to your instance using the identifier /dev/sdf.
--block-device-mappings "[{\"DeviceName\":\"/dev/sdf\",\"Ebs\":{\"VolumeSize\":20,\"DeleteOnTermination\":false}}]"The following example adds an Amazon EBS volume, mapped to /dev/sdf, based on an existing snapshot. A snapshot represents an image that is loaded onto the volume for you. When you specify a snapshot, you don't have to specify a volume size; it will be large enough to hold your image. However, if you do specify a size, it must be greater than or equal to the size of the snapshot.
--block-device-mappings "[{\"DeviceName\":\"/dev/sdf\",\"Ebs\":{\"SnapshotId\":\"snap-a1b2c3d4\"}}]"The following example adds two volumes to your instance. The number of volumes available to your instance depends on its instance type.
--block-device-mappings "[{\"DeviceName\":\"/dev/sdf\",\"VirtualName\":\"ephemeral0\"},{\"DeviceName\":\"/dev/sdg\",\"VirtualName\":\"ephemeral1\"}]"The following example creates the mapping (/dev/sdj), but doesn't provision a volume for the instance.
--block-device-mappings "[{\"DeviceName\":\"/dev/sdj\",\"NoDevice\":\"\"}]"For more information, see Block Device Mapping in the Amazon EC2 User Guide.
Add a tag to your instanceA tag is a label that you assign to an AWS resource. It enables you to add metadata to your resources that you can use for a variety of purposes. For more information, see Tagging Your Resources in the Amazon EC2 User Guide.
The following example shows how to add a tag with the key name "Name" and the value "MyInstance" to the specified instance, by using the aws ec2 create-tags command.
$ aws ec2 create-tags --resources i-5203422c --tags Key=Name,Value=MyInstanceWhen your instance is running, you can connect to it and use it just as you'd use a computer sitting in front of you. For more information, see Connect to Your Amazon EC2 Instance in the Amazon EC2 User Guide.
List your instancesYou can use the AWS CLI to list your instances and view information about them. You can list all your instances, or filter the results based on the instances that you're interested in.
The following examples show how to use the aws ec2 describe-instances command.
The following command lists all your instances.
$ aws ec2 describe-instancesThe following command filters the list to only your t2.micro instances and outputs only the InstanceId values for each match.
$ aws ec2 describe-instances --filters "Name=instance-type,Values=t2.micro" --query "Reservations[].Instances[].InstanceId"
[
"i-05e998023d9c69f9a"
]The following command lists any of your instances that have the tag Name=MyInstance.
$ aws ec2 describe-instances --filters "Name=tag:Name,Values=MyInstance"The following command lists your instances that were launched using any of the following AMIs: ami-x0123456, ami-y0123456, and ami-z0123456.
$ aws ec2 describe-instances --filters "Name=image-id,Values=ami-x0123456,ami-y0123456,ami-z0123456"Terminating an instance deletes it. You can't reconnect to an instance after you've terminated it.
As soon as the state of the instance changes to shutting-down or terminated, you stop incurring charges for that instance. If you want to reconnect to an instance later, use stop-instances instead of terminate-instances. For more information, see Terminate Your Instance in the Amazon EC2 User Guide.
To delete an instance, you use the command aws ec2 terminate-instances to delete it.
$ aws ec2 terminate-instances --instance-ids i-5203422c
{
"TerminatingInstances": [
{
"InstanceId": "i-5203422c",
"CurrentState": {
"Code": 32,
"Name": "shutting-down"
},
"PreviousState": {
"Code": 16,
"Name": "running"
}
}
]
}AWS CLI reference:
Other reference:
RetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4