nlmixr2est to not have issues with Mac m1 san checks.At the request of CRAN, be a bit more careful so that names are not duplicated. Now include the md5 hash, a global counter and random 4 digit and number combination. In addition add the name of the original function so it will be easier to debug in the future.
Fall back to data.frame rbind when rbind.rxSolve() fails
Add the ability to use rbind for solved rxode2 frames.
Fix LTO issue for _rxode2_calcDerived
Add more information errors about NAs during solving.
Fix rxDerived() for mixed vector and non-vector input.
Fix model variables for alag(cmt) when they are defined before d/dt() or linCmt()
Just in time use of state.ignore in the model variables, fixes negative length error observed in #857.
Fix steady state bug with time-varying covariates. Now the covariates are inferred at the time of the steady state (instead of searching through the subject based on the projected time).
Rework the linear solved systems to use the wnl solutions, and threaded linear systems solve (for non-gradient solutions). This new method closes a variety of linear compartment model bugs (#261, #272, #441, #504, #564, #717, #728, #827, and #855)
Added new types of bounds for event tables:
3 point bounds et(list(c(low, mid, high))) when specified this way, they will not change. Perfect for use with babelmixr2âs PopED (#862, #863, #854)
Intervals simulated by normal values instead of uniform. In this case the first seen interval will be 3 elements with NA at the end et(list(c(mean, sd, NA), c(mean, sd))), and the other elements can simply be 2 declaring the c(mean, sd)
Of course the uniform windows of et(list(c(low, high))) still work
Currently these different types of windows cannot be mixed.
Add ability to pipe a list or named numeric as an eta with %>% ini(~eta)
Added a fix for event tables where expanding IDs in non-sequential order. In particular if the first ID is not the minimum ID when expanding the first event table, the smallest ID was not in the output table. Now the smallest ID is in the event table. (Fixes #878, #869, #870)
Added ability to pipe ini() or lotri(), or any other expression that can be converted to an ini with as.ini(). Also allows ini() expressions to be converted to lotri with as.lotri(). Fixes #871
Added new type of variability expression for simulation and estimation with focei and likelihood related methods: +var(). This changes standard deviation parameters to variance parameters.
Added new type of endpoint expression for focei estimation +dv(). This only transforms the data and not the predictions. I can only see it being useful in model linearization.
Bug fix for parameters that are in both input ($params) and output ($lhs) that respects the order of the $lhs declaration (Fixes #876)
Add rxFixRes to literally fix the residual estimates in a model (#889)
Now modeled duration of 0 is treated as a bolus dose (#892)
Add stable hashes for rxUi objects (#838, #689)
Fix for iov simulation (#842)
Fix for rxnbinom() called directly from R (#847) and expand it to match more close with Râs rnbinom() including allowing named mu= calls. In rxode2 ui, these are also now allowed.
Add logit/expit named expressions, that is logit(x, high=20) becomes logit(x, 0, 20) in ui models.
Updated random ui models like rxnorm(sd=10) to accept complex numeric expressions like rxnorm(sd=10+1).
Updated random ui models to accept complex non-numeric expressions like rxnorm(sd=a+b)
Rework the tad() and related functions so they use the same interface as compartments (this way they do not depend on the order of compartments); See #815. For mu-referencing, Also allow dummy variables to ignore state requirements (ie podo(depot) in a single line will not error when parsing mu-referenced equations).
Add getRxNpars to api. This allows the development version of babelmixr2 to better check what model is loaded and unload/reload as necessary.
Add rxUdfUiControl() to rxode2 user function to get control information from something like nlmixr2
Bug fix for tracking time after dose when dosing to 2 compartments occur at the exact same time (#804, #819)
Change transit() model so that it uses tad0(), podo0() and related functions for a bit more stable simulation and estimation
Fix compile flags to work with BH 1.87 (#826)
Bug fix for api, the censoring function pointer has been updated (#801).
Query rxode2.verbose.pipe at run time instead of requiring it to be set before loading rxode2.
Have correct values at boundaries for logit, expit, probit, and probitInv (instead of NA). For most cases this does not break anything.
Add a new style of user function that modifies the ui while parsing or just before using the function (in the presence of data).
Used the new user function interface to allow all random functions in rxode2 ui functions to be named. For example, you can use rxnorm(sd=3) instead of having to use rxnorm(0, 3), although rxnorm() still works.
The model properties was moved from $params to $props so it does not conflict with the low level rxode2 model $params
Error when specifying wd without modName
With Linear and midpoint of a time between two points, how rxode2 handles missing values has changed. When the missing value is lower than the requested time, it will look backward until it finds the first non-missing value (or if all are missing start looking forward). When the missing value is higher than the requested time, the algorithm will look forward until it finds the first non-missing value (or if all are missing, start looking backward).
The order of ODEs is now only determined by the order of cmt() and d/dt(). Compartment properties, tad() and other compartment related variables no no longer affect compartment sorting. The option rxode2.syntax.require.ode.first no longer does anything.
The handling of zeros âsafelyâ has changed (see #775)
when safeZero=TRUE and the denominator of a division expression is zero, use the Machineâs small number/eps (you can see this value with .Machine$double.eps)
when saveLog=TRUE and the x in the log(x) is less than or equal to zero, change this to log(eps)
when safePow=TRUE and the expression x^y has a zero for x and a negative number for y replace x with eps.
Since the protection for divide by zero has changed, the results will also change. This is a more conservative protection mechanism than was applied previously.
Random numbers from rxode2 are different when using dop853, lsoda or indLin methods. These now seed the random numbers in the same way as liblsoda, so the random number provided will be the same with different solving methods.
The arguments saved in the rxSolve for items like thetaMat will be the reduced matrices used in solving, not the full matrices (this will likely not break very many items)
iCov is no longer merged to the event dataset. This makes solving with iCov slightly faster (#743)You can remove covariances for every omega by piping with %>% ini(diag()) you can be a bit more granular by removing all covariances that have either eta.ka or eta.cl by: %>% ini(diag(eta.ka, eta.cl)) or anything with correlations with eta.cl with %>% ini(diag(eta.cl))
You can also remove individual covariances by %>% ini(-cov(a, b)) or %>% ini(-cor(a,b)).
You can specify the type of interpolation applied for added dosing records (or other added records) for columns that are kept with the keep= option in rxSolve(). This new option is keepInterpolation and can be locf for last observation carried forward, nocb which is the next observation carried backward, as well as NA which puts a NA in all imputed data rows. See #756.
Note: when interpolation is linear/midpoint for factors/characters it changes to locf with a warning (#759)
Also note, that the default keep interpolation is na
Now you can specify the interpolation method per covariate in the model:
linear(var1, var2) says both var1 and var2 would use linear interpolation when they are a time-varying covariate. You could also use linear(var1)
locf() declares variables using last observation carried forward
nocb() declares variables using next observation carried backward
midpoint() declares variables using midpoint interpolation
linear(), locf(), locb(), midpoint(), params(), cmt() and dvid() declarations are now ignored when loading a rxode2 model with rxS()
Strings can be assigned to variables in rxode2.
Strings can now be enclosed with a single quote as well as a double quote. This limitation was only in the rxode2 using string since the R-parser changes single quotes to double quotes. (This has no impact with rxode2({}) and ui/function form).
More robust string encoding for symengine (adapted from utils::URLencode() and utils::URLdecode())
Empty arguments to rxRename() give a warning (#688)
Promoting from covariates to parameters with model piping (via ini()) now allows setting bounds (#692)
Added assertCompartmentName(), assertCompartmentExists(), assertCompartmentNew(), testCompartmentExists(), assertVariableExists() testVariableExists(), assertVariableNew(), assertVariableName(), and assertParameterValue() to verify that a value is a valid nlmixr2 compartment name, nlmixr2 compartment/variable exists in the model, variable name, or parameter value (#726; #733)
Added assertRxUnbounded(), testRxUnbounded(), warnRxBounded() to allow nlmixr2 warn about methods that ignore boundaries #760
Added functions tad0(), tafd0(), tlast0() and tfirst0() that will give 0 instead of NA when the dose has not been administered yet. This is useful for use in ODEs since NAs will break the solving (so can be used a bit more robustly with models like Weibull absorption).
rxode2 is has no more binary link to lotri, which means that changes in the lotri package will not require rxode2 to be recompiled (in most cases) and will not crash the system.
rxode2 also has no more binary linkage to PreciseSums
The binary linkage for dparser is reduced to C structures only, making changes in dparser less likely to cause segmentation faults in rxode2 if it wasnât recompiled.
A new model property has been added to $props$cmtProp and $statePropDf. Both are data-frames showing which compartment has properties (currently ini, f, alag, rate and dur) in the rxode2 ui model. This comes from the lower level model variable $stateProp which has this information encoded in integers for each state.
A new generic method rxUiDeparse can be used to deparse meta information into more readable expressions; This currently by default supports lower triangular matrices by lotri, but can be extended to support other types of objects like ânlmixr2âs foceiControl() for instance.
Fix ui$props$endpoint when the ui endpoint is defined in terms of the ode instead of lhs. See #754
Fix ui$props when the ui is a linear compartment model without ka defined.
Model extraction modelExtract() will now extract model properties. Note that the model property of alag(cmt) and lag(cmt) will give the same value. See #745
When assigning reserved variables, the parser will error. See #744
Linear interpolation will now adjust the times as well as the values when NA values are observed.
Fix when keeping data has NA values that it will not crash R; Also fixed some incorrect NA interpolations. See #756
When using cmt() sometimes the next statement would be corrupted in the normalized syntax (like for instance locf); This bug was fixed (#763)
keep will now error when trying to keep items that are in the rxode2 output data-frame and will be calculated (#764)
rxode2parse, rxode2random, and rxode2et into this package; The changes in each of the packages are now placed here:Make the stacking more flexible to help rxode2 have more types of plots
Add toTrialDuration by Omar Elashkar to convert event data to trial duration data
Fix Issue #23 and prefer variable values over NSE values
Fix dollar sign accessing of objects (like data frames), as pointed out by @frbrz (issue #16)
Use rxode2parse functions for internal event table creation (where they were moved to).
Dropped C++14 and let the system decide.
Split off et(), eventTable() and related functions.
Also split off rxStack() and rxCbindStudyIndividual() in this package.
Added a NEWS.md file to track changes to the package.
<random> to boost::random. Since this is not dependent on the compiler, it makes the random numbers generated from Mac, Windows and Linux the same for every distribution. Unfortunately with a new random number transformation, the simulation results will likely be different than they were before. The exception to this is the uniform number, which was always the same between platforms.m1mac)Added function dfWishart which gives (by simulation) an approximation of the degrees of freedom of a Wishart to match a rse value.
Added function swapMatListWithCube which swaps omegaList with omegaCube values
Ensure that the outputs are integers (instead of long integers) as requested by CRAN for some checking functions.
rxode2parse to allow etTrans to be moved thereInitial release of rxode2random, which separates the parallel safe, random number generation from ârxode2â into a separate package to reduce ârxode2â compilation time. This should make CRAN maintenance a bit easier.
Added a NEWS.md file to track changes to the package.
SET_TYPEOF which is no longer part of the C R API.Added a evid suffix of 60 for cases where evid=2 adds an on event (fixes tad() calculation in certain edge cases)
Initialize all variables to NA
Removed linear compartment solutions with gradients from rxode2parse (and rxode2) when compiled with intel c++ compiler (since it crashes while compiling).
Fixed m1mac string issues as requested by CRAN
Added ability to query R user functions in a rxode2 model (will force single threaded solve)
Moved core rxFunParse and rxRmFunParse here so that C and R user function clashes can be handled
Model variables now tracks which compartments have a lag-time defined
For compartment with steady state doses (NONMEM equivalent SS=1, SS=2), an additional tracking time-point is added at to track the time when the lagged dose is given. As an upshot, the lagged dose will start at the steady state concentration shifted by + ii - lag in rxode2 (currently for ode systems only)
This release calculates non bio-availability adjusted duration for all rates instead of trying to figure the rate duration during solving.
Make double assignment an error, ie a <- b <-
NA times are ignored (with warning)
Steady state bolus doses with addl are treated as non steady state events (like what is observed in NONMEM)
Timsort was upgraded; drop radix support in rxode2 structure
etTrans now supports keeping logical vectors (with the appropriate version of rxode2).
Security fixes were applied as requested by CRAN
data.table explicitly in the R code (before was imported only in C/C++ code)âlinCmt()â translations of âalphaâ, âbetaâ, âgammaâ, âk21â, âk31â, âvcâ now error instead of ignoring âgammaâ and âk31â to give 2 cmt solution
transit compartment internal code now changes dose to 0.0 when no dose has been administered to the depot compartment. This way dosing to the central compartment (without dosing to the transit compartment) will not give a NA for the depot compartment (and consequently for the central compartment)
Moved rxDerived here and added tests for it here as well.
Moved etTransParse here and added tests for it here as well (makes up most of etTrans). In addition the following changes were made to etTransParse()/etTrans():
The internal translation (etTrans()) will not drop times when infusions stop. Before, if the infusion stopped after the last observation the time when the infusion stopped would be dropped. This interferes with linCmt() models.
Breaking change/bug fix evid=2 are considered observations when translating data to internal rxode2 event structure
Fix edge case to find infusion duration when it is the first item of the dosing record at time 0.
Fixed a bug for certain infusions where the rate, ii and/or ss data items were dropped from the output when addDosing=TRUE
Also have internal functions to convert between classic NONMEM events and rxode2 events
Have an internal function that gives information on the linear compartmental model translation type, which could be useful for babelmixr2
âtimeâ in model is now case insensitive
Use function declaration in rxode2parseGetTranslation() to determine thread safety of functions available to rxode2
Add check for correct number of function arguments to parser.
Like R, known functions can be assigned as a variable and the function can still be called (while not changing the variable value). For example you can have a variable gamma as well as a function gamma().
Fix garbled error messages that occur with certain messages.
Fixed errors that occurred when using capitalized AMT variables in the model.
Bug fix for strict prototypes
Removed sprintf as noted by CRAN
Made rxode2parse dll binary independent of rxode2()
Make sure that the object is a uncompressed rxode2 ui for solving with rxSolve (See #661)
Fix #670 by using the last simulated observation residual when there are trailing doses.
Create a function to see if a rxode2 solve is loaded in memory (rxode2::rxSolveSetup())
Create a new function that fixes the rxode2 population values in the model (and drops them in the initial estimates); rxFixPop()
Pendantic no-remap (as requested by CRAN)
gcc USBAN fix (as requested by CRAN)
rxUi compression now defaults to fast compression
Fixes String literal formatting issues as identified by CRAN (#643)
Removes linear compartment solutions with gradients for intel c++ compiler (since they crash the compiler).
Steady state with lag times are no longer shifted by the lag time and then solved to steady state by default. In addition the steady state at the original time of dosing is also back-calculated. If you want the old behavior you can bring back the option with ssAtDoseTime=FALSE.
âdop853â now uses the hmax/h0 values from the rxControl() or rxSolve(). This may change some ODE solving using âdop853â
When not specified (and xgxr is available), the x axis is no longer assumed to be in hours
User defined functions can now be R functions. For many of these R functions they can be converted to C with rxFun() (you can see the C code afterwards with rxC("funName"))
Parallel solving of models that require sorting (like modeled lag times, modeled duration etc) now solve in parallel instead of downgrading to single threaded solving
Steady state infusions with a duration of infusions greater than the inter-dose interval are now supported.
Added $symengineModelNoPrune and $symengineModelPrune for loading models into rxode2 with rxS()
When plotting and creating confidence intervals for multiple endpoint models simulated from a rxode2 ui model, you can plot/summarize each endpoint with sim. (ie. confint(model, "sim") or plot(model, sim)).
If you only want to summarize a subset of endpoints, you can focus on the endpoint by pre-pending the endpoint with sim. For example if you wanted to plot/summarize only the endpoint eff you would use sim.eff. (ie confint(model, "sim.eff") or plot(model, sim.eff))
Added model$simulationIniModel which prepend the initial conditions in the ini({}) block to the classic rxode2({}) model.
Now model$simulationModel and model$simulationIniModel will save and use the initialization values from the compiled model, and will solve as if it was the original ui model.
Allow ini(model) <- NULL to drop ini block and as.ini(NULL) gives ini({}) (Issue #523)
Add a function modelExtract() to extract model lines to allow modifying them and then changing the model by piping or simply assigning the modified lines with model(ui) <- newModifiedLines
Add Algebraic mu-referencing detection (mu2) that allows you to express mu-referenced covariates as:
cl <- exp(tcl + eta.cl + wt_cl * log(WT/70.5))Instead of the
cl <- exp(tcl + eta.cl + wt_cl * log.WT.div.70.5)That was previously required (where log.WT.div.70.5 was calculated in the data) for mu expressions. The ui now has more information to allow transformation of data internally and transformation to the old mu-referencing style to run the optimization.
Allow steady state infusions with a duration of infusion greater than the inter-dose interval to be solved.
Solves will now possibly print more information when issuing a âcould not solve the systemâ error
The function rxSetPipingAuto() is now exported to change the way you affect piping in your individual setup
Allow covariates to be specified in the model piping, that is mod %>% model(a=var+3, cov="var") will add "var" as a covariate.
When calculating confidence intervals for rxode2 simulated objects you can now use by to stratify the simulation summary. For example you can now stratify by gender and race by: confint(sim, "sim", by=c("race", "gender"))
When calculating the intervals for rxode2 simulated objects you can now use ci=FALSE so that it only calculates the default intervals without bands on each of the percentiles; You can also choose not to match the secondary bands limits with levels but use your own ci=0.99 for instance
A new function was introduced meanProbs() which calculates the mean and expected confidence bands under either the normal or t distribution
A related new function was introduced that calculates the mean and confidence bands under the Bernoulli/Binomial distribution (binomProbs())
When calculating the intervals for rxode2 simulated objects you can also use mean=TRUE to use the mean for the first level of confidence using meanProbs(). For this confidence interval you can override the n used in the confidence interval by using n=#. You can also change this to a prediction interval instead using pred=TRUE.
Also when calculating the intervals for rxode2 simulated object you can also use mean="binom" to use the binomial distributional information (and ci) for the first level of confidence using binomProbs(). For this confidence interval you can override the n used in the confidence interval by using n=#. You can also change this to a prediction interval instead using pred=TRUE. With pred=TRUE you can override the number of predicted samples with m=#
When plotting the confint derived intervals from an rxode2 simulation, you can now subset based on a simulated value like plot(ci, Cc) which will only plot the variable Cc that you summarized even if you also summarized eff (for instance).
When the rxode2 ui is a compressed ui object, you can modify the ini block with $ini <- or modify the model block with $model <-. These are equivalent to ini(model) <- and model(model) <-, respectively. Otherwise, the object is added to the user defined components in the function (ie $meta). When the object is uncompressed, it simply assigns it to the environment instead (just like before).
When printing meta information that happens to be a lotri compatible matrix, use lotri to express it instead of the default R expression.
Allow character vectors to be converted to expressions for piping (#552)
rxAppendModel() will now take an arbitrary number of models and append them together; It also has better handling of models with duplicate parameters and models without ini() blocks (#617 / #573 / #575).
keep will now also keep attributes of the input data (with special handling for levels); This means a broader variety of classes will be kept carrying more information with it (for example ordered factors, data frame columns with unit information, etc)
Piping arguments append for ini() and model() have been aligned to perform similarly. Therefore ini(append=) now can take expressions instead of simply strings and model(append=) can also take strings. Also model piping now can specify the integer line number to be modified just like the ini() could. Also model(append=FALSE) has been changed to model(append=NULL). While the behavior is the same when you donât specify the argument, the behavior has changed to align with ini() when piping. Hence model(append=TRUE) will append and model(append=FALSE) will now pre-pend to the model. model(append=NULL) will modify lines like the behavior of ini(append=NULL). The default of model(line) modifying a line in-place still applies. While this is a breaking change, most code will perform the same.
Labels can now be dropped by ini(param=label(NULL)). Also parameters can be dropped with the idiom model(param=NULL) or ini(param=NULL) changes the parameter to a covariate to align with this idiom of dropping parameters
rxRename has been refactored to run faster
Add as.model() for list expressions, which implies model(ui) <- ui$lstExpr will assign model components. It will also more robustly work with character vectors
Simulated objects from rxSolve now can access the model variables with $rxModelVars
Simulation models from the UI now use rxerr.endpoint instead of err.endpoint for the sigma residual error. This is to align with the convention that internally generated variables start with rx or nlmixr
Sorting only uses timsort now, and was upgraded to the latest version from Morwenn
Simulating/solving from functions/ui now prefers params over omega and sigma in the model (#632)
Piping does not add constants to the initial estimates
When constants are specified in the model({}) block (like k <- 1), they will not be to the ini block
Bug fix for geom_amt() when the aes transformation has x
Bug fix for some covariate updates that may affect multiple compartment models (like issue #581)
xgxrCRAN requested that FORTRAN kind be changed as it was not portable; This was commented code, and simply removed the comment.
Bug-fix for geom_amt(); also now uses linewidth and at least ggplot2 3.4.0
Some documentation was cleaned up from rxode2 2.0.13
A bug was fixed so that the zeroRe() function works with correlated omega values.
A bug was fixed so that the rename() function works with initial conditions for compartments (cmt(0))
A new function zeroRe() allows simple setting of omega and/or sigma values to zero for a model (#456)
Diagonal zeros in the omega and sigma matrices are treated as zeros in the model. The corresponding omega and sigma matrices drop columns/rows where the diagonals are zero to create a new omega and sigma matrix for simulation. This is the same idiom that NONMEM uses for simulation from these matrices.
Add the ability to pipe model estimates from another model by parentModel %>% ini(modelWithNewEsts)
Add the ability to append model statements with piping using %>% model(x=3, append=d/dt(depot)), still supports appending with append=TRUE and pre-pending with append=NA (the default is to replace lines with append=FALSE)
rxSolveâs keep argument will now maintain character and factor classes from input data with the same class (#190)
Parameter labels may now be modified via ini(param = label("text")) (#351).
Parameter order may be modified via the append argument to ini() when piping a model. For example, ini(param = 1, append = 0) or ini(param = label("text"), append = "param2") (#352).
If lower/upper bounds are outside the required bounds, the adjustment is displayed.
When initial values are piped that break the modelâs boundary condition reset the boundary to unbounded and message which boundary was reset.
Added as.rxUi() function to convert the following objects to rxUi objects: rxode2, rxModelVars, function. Converting nlmixr2 fits to rxUi will be placed in the s3 method in the corresponding package.
assertRxUi(x) now uses as.rxUi() so that it can be extended outside of rxode2/nlmixr2.
rxode2 now supports addl with ss doses
Moved rxDerived to rxode2parse (and re-exported it here).
Added test for transit compartment solving in absence of dosing to the transit compartment (fixed in rxode2parse but solving tested here)
Using ini() without any arguments on a rxode2 type function will return the ini() block. Also added a method ini(mod) <- iniBlock to modify the ini block is you wish. iniBlock should be an expression.
Using model() without any arguments on a rxode2 type function will return the model() block. Also added a new method model(mod) <- modelBlock
Added a new method rxode2(mod) <- modFunction which allows replacing the function with a new function while maintaining the meta information about the ui (like information that comes from nonmem2rx models). The modFunction should be the body of the new function, the new function, or a new rxode2 ui.
rxode2 ui objects now have a $sticky item inside the internal (compressed) environment. This $sticky tells what variables to keep if there is a âsignificantâ change in the ui during piping or other sort of model change. This is respected during model piping, or modifying the model with ini(mod)<-, model(mod)<-, rxode2(mod)<-. A significant change is a change in the model block, a change in the number of estimates, or a change to the value of the estimates. Estimate bounds, weather an estimate is fixed or estimate label changes are not considered significant.
Added as.ini() method to convert various formats to an ini expression. It is used internally with ini(mod)<-. If you want to assign something new that you can convert to an ini expression, add a method for as.ini().
Added as.model() method to convert various formats to a model expression. It is used internally with model(mod)<-. If you want to assign something new that you can convert to a model expression, add a method for as.model().
Give a more meaningful error for ârxode2â ui models with only error expressions
Break the ABI requirement between roxde2() and rxode2parse()
The new rxode2parse will fix the sprintf exclusion shown on CRAN.
Time invariant covariates can now contain âNAâ values.
When a column has âNAâ for the entire id, now ârxode2â warns about both the id and column instead of just the id.
To fix some CRAN issues in ânlmixr2estâ, make the version dependency explicit.
Remove log likelihoods from ârxode2â to reduce compilation time and increase maintainability of ârxode2â. They were transferred to ârxode2llâ (requested by CRAN).
Remove the parsing from ârxode2â and solved linear compartment code and move to ârxode2parseâ to reduce the compilation time (as requested by CRAN).
Remove the random number generation from ârxode2â and move to ârxode2randomâ to reduce the compilation time (as requested by CRAN).
Remove the event table translation and generation from ârxode2â and move to ârxode2etâ to reduce the compilation time (as requested by CRAN).
Change the rxode2 ui object so it is a compressed, serialized object by default. This could reduce the C stack size problem that occurs with too many environments in R.
Warn when ignoring items during simulations
Export a method to change ârxode2â solve methods into internal integers
Bug fix for time invariant covariates identified as time variant covariate when the individualâs time starts after 0.
rxgamma now only allows a rate input. This aligns with the internal rxode2 version of rxgamma and clarifies how this will be used. It is also aligned with the llikGamma function used for generalized likelihood estimation.
ui cauchy simulations now follow the ui for normal and t distributions, which means you can combine with transformations. This is because the cauchy is a t distribution with one degree of freedom.
ui dnorm() and norm() are no longer equivalent to add(). Now it allows you to use the loglik llikNorm() instead of the standard nlmixr2 style focei likelihood. This is done by adding dnorm() at the end of the line. It also means dnorm() now doesnât take any arguments.
Vandercorput normal removed (non-random number generator)
Allow models in the nlmixr2 form without an ini({}) block
Allow model piping of an omega matrix by f %>% ini(omegaMatrix)
Standard models created with rxode2() can no be piped into a model function
Families of log-likelihood were added to rxode2 so that mixed likelihood nonlinear mixed effects models may be specified and run.
The memory footprint of a rxode2 solving has been reduced
Piping now allow named strings (issue #249)
rxode2âs symengine would convert sqrt(2) to M_SQRT_2 when it should be M_SQRT2. This has been fixed; it was most noticeable in nlmixr2 log-likelihood estimation methods
rxode2 treats DV as a non-covariate with etTran (last time it would duplicate if it is in the model). This is most noticeable in the nlmixr2 log-likelihood estimation methods.
A new flag (rxFlag) has been created to tell you where in the rxode2 solving process you are. This is useful for debugging. If outputting this variable it will always be 11 or calculating the left handed equations. If you are using in conjunction with the printf() methods, it is a double variable and should be formatted with "%f".
An additional option of fullPrint has been added to rxode2() which allows rprintf() to be used in almost all of rxode2() steps (inductive linearization and matrix exponential are the exception here) instead of just the integration ddt step. It defaults to FALSE.
Removed accidental ^S from news as requested by CRAN.
Bug fix for more complicated mu-referencing.
Change rxode2 md5 to only depend on the C/C++/Fortran code and headers not the R files. That way if there is binary compatibility between nlmixr2est and rxode2, a new version of nlmixr2est will not need to be submitted to CRAN.
The options for rxControl and rxSolve are more strict. camelCase is now always used. Old options like add.cov and transit_abs are no longer supported, only addCov is supported.
A new option, sigdig has been added to rxControl(), which controls some of the more common significant figure options like atol, rtol, ssAtol, ssRtol, with a single option.
For simulations, $simulationSigma now assumes a diagonal matrix. The sigma values are assumed to be standard normal, and uncorrelated between endpoints. Simulation with uncertainty will still draw from this identity diagonal matrix
Parallel solving now seeds each simulation per each individual based on the initial seed plus the simulation id. This makes the simulation reproducible regardless of the number of cores running the simulation.
Solved objects now access the underlying rxode model with $rxode2 instead of $rxode
Since this change names, rxode2, rxode and RxODE all perform the same function.
Options were changed from RxODE.syntax to rxode2.syntax.
Assigning states with rxode2.syntax.assign.state (was RxODE.syntax.assign.state) is no longer supported.
Enforcing âpureâ assignment syntax with = syntax is no longer supported so rxode2.syntax.assign is no longer supported (was RxODE.syntax.assign).
Since R supports ** as an exponentiation operator, the pure syntax without ** can no longer be enabled. Hence rxode2.syntax.star.pow (was RxODE.syntax.star.pow) no longer has any effect.
The âpureâ syntax that requires a semicolon can no longer be enabled. Therefore rxode2.syntax.require.semicolon (was RxODE.syntax.require.semicolon) no longer has any effect.
The syntax state(0) can no longer be turned off. rxode2.syntax.allow.ini0 (was RxODE.syntax.allow.ini0) has been removed.
Variable with dots in variable and state names like state.name works in R. Therefore, âpureâ syntax of excluding . values from variables cannot be enforced with rxode2.syntax.allow.dots (was RxODE.syntax.allow.dots).
The mnemonic et(rate=model) and et(dur=model) mnemonics have been removed. rate needs to be set to -1 and -2 manually instead.
The function rxode2Test() has been removed in favor of using testthat directly.
Transit compartments need to use a new evid, evid=7. That being said, the transitAbs option is no longer supported.
ID columns in input parameter data frames are not sorted or merged with original dataset any more; The underlying assumption of ID order should now be checked outside of rxode2(). Note that the event data frame is still sorted.
The UI functions of nlmixr have been ported to work in rxode2 directly.
rxModelVars({}) is now supported.
You may now combine 2 models in rxode2 with rxAppendModel(). In fact, as long as the first value is a rxode2 evaluated ui model, you can use c/rbind to bind 2 or more models together.
You may now append model lines with piping using %>% model(lines, append=TRUE) you can also pre-pend lines by %>% model(lines, append=NA)
You may now rename model variables, states and defined parameters with %>% rxRename(new=old) or if dplyr is loaded: %>% rename(new=old)
You can fix parameters with %>% ini(tcl=fix) or %>% ini(fix(tcl)) as well as unfix parameters with %>% ini(tcl=unfix) or %>% ini(unfix(tcl))
Strict R headers are enforced more places
Since there are many changes that could be incompatible, this version has been renamed to rxode2
rxode2() printout no longer uses rules and centered headings to make it display better on a larger variety of systems.
tad() and related time features only reset at the start of an infusion (as opposed to starting at the beginning and end of an infusion)Fix subject initialization of focei problem (#464)
Fix LHS offset to allow internal threading and more parallel processing in the future.
Remove warnings for duration and rate
Donât export pillar methods any more (simply register at load if present)
As requested by CRAN, change fortran and C binding for BLAS an LINPACK
Fix the LTO issue that CRAN identified.
Move the omp files so they come first to support clang13, as identified by CRAN.
For now, be a little more conservative in dur() and rate() warnings because linCmt() models in nlmixr currently produce irrelevant warnings.
Always calculate ânolhsâ for using numeric differences when the inner problem. This allows the inner problem to fallback to a finite difference approximation to the focei objective function.
Updated the parser C code grammar using latest dparser CRAN package
Added a new cbind function that is used to mix data frame input with simulated individual parameters and residual parameters, rxCbindStudyIndividual().
Now data frame input can be mixed with simulating from omega and sigma matrices (though not yet in nested simulations)
Race conditions when simulating random numbers is solved by chunking each simulation into groups that will always be performed per each thread. This way the simulation is now reproducible regardless of load. Because of the chunking, simulations with random numbers generated inside of it are now threaded by default (though a warning is produced about the simulation only be reproducible when run with the same number of threads)
Simulations were double checked and made sure to use the engine reserved for each core run in parallel; Some of the random generators were not taking random numbers from the correct engine, which was corrected. Therefore, simulations from this version are expected to be different (in parallel) than previous versions.
Added function rxSetSeed() to set the internal RxODE seed instead of grabbing it from a uniform random number tied to the original R seed. This will avoid the possibility of duplicate seeds and is the best practice.
Updating parameter pointers is done once per ID and locked based on ID to remove the recursion in #399, but still have the correct behavior see #430
Parsing updated to retain âparam()â in normalized model, #432.
Handle edge case of interpolation at first index correctly, fixes #433
Instead of storing each dose information sequentially, store dose information at the same index of the evid defining the dose. This memory rewrite is to fix the issue #435.
Start using strict headers as it is required for the forthcoming release of Rcpp. Thanks to Dirk Eddelbuettel for some of the fixes and alerting us to this change.
Check arguments for add.dosing() more strictly. See Issue #441
Issue a warning when either dur() or rate() is in the model but the modeled rate and duration is not included in the event table.
When the data requires a modeled rate and modeled duration but it is not in the model, warn about the mismatch in data
Added a back-door for debugging. If you specify options(RxODE.debug=TRUE) then each solve saves the solving information to the file "last-rxode.qs" before actually solving the system.
Only will try to solve RxODE problems on compatible models; If the model is not supported it will throw an error instead of crashing (See #449)
Turn off parallel ODE solving whenever the system needs to sort times based on model dosing. Currently this type of solving is not thread safe.
Update timsort headers to latest version.
At the request of CRAN, stripping the debugging symbols for the CRAN release is no longer performed. This means a larger binary size for RxODE in this release.
At the request of CRAN the liblsoda code has been changed so that the memory in C defined by _C() is now defined by _rxC(). This will be seen in some of the error messages, which will no longer match the error messages of unmodified liblsoda.
iCov behavior has shifted to merge on the input event dataset. See Issue #409; This is more in line with expectations of iCov behavior, and reduces the amount of code needed to maintain iCov.
The iCov in the pipeline is no longer supported because it simply is a merge with the event dataset.
This can be a breaking change depending on the code you use. Note that clinical trial simulations, resampling is likely better than trying to fill out iCov for every individual which was the prior use.
Bug fix for crashes with string covariates or factor covariates, issue #410. Also factor column names are compared with case insensitivity just like the rest of the column names for event tables or data sets in RxODE.
Change syntax vignette to use markdown option screenshot.force=FALSE. This should get rid of the webshot error
Change to depend on dparser 1.3.0, which has some memory fixes
RxODE imports but does not link to checkmate any longer. This change should make recompilation of RxODE to work with different releases of checkmate unnecessary.
Default Solaris solver changed back to âlsodaâ
Fix Bug #393, where in certain circumstances rxSolve(...,theta=) did not solve for all subjects.
Will not ignore NEWS and README when building the package so that they will show up on CRAN. You can also access the news by news(package="RxODE")
Changed ODR model names from time id to _rx followed by the md5 hash id and a per-session counter id; For packages the id is _rxp followed by the md5 hash and a per-session counter id.
Changed qs to be more conservative in hash creation. Add a check hash as well as NOT using altrep stringfish representation.
Maintenance release â use std::floor and cast variables to double for internal C functions. This should allow a successful compile on Solaris CRAN.
Changed units from an Imports to a Suggests to allow testing on Solaris rhub
Changed ODR model names from time id to _rx followed by the md5 hash id; For packages the id is _rxp followed by the md5 hash.
Removed AD linear compartment solutions for Windows R 3.6, though they still work for Windows R 4.0 (You can get them back for Windows R 3.6 if you install BH 1.66.0-1 and then recompile from source).
nlmixr to fail with solved systems on Windows 3.6. Currently the Stan Headers do not compile on this system so they are disabled at this time.RxODE imports but does not link to qs any longer; This change should make recompilation of RxODE to work with different releases of qs unnecessary.
RxODE now checks for binary compatibility for Rcpp, dparser, checkmate, and PreciseSums
RxODE can only use supported functions (could be breaking); You may add your own functions with rxFun and their derivatives with rxD
RxODE now uses its own internal truncated multivariate normal simulations based on the threefry sitmo library. Therefore random numbers generated within RxODE like providing rxSolve(...,omega=) will have different results with this new random number generator. This was done to allow internal re-sampling of sigmas/etas with thread-safe random number generators (calling R through mvnfast or Râs simulation engines are not thread safe).
RxODE now moved the precise sum/product type options for sum() and prod() to rxSolve or rxControl
cvPost now will returned a named list of matrices if the input matrix was named
rxSolve will now return an integer id instead of a factor id when id is integer or integerish (as defined by checkmate). Otherwise a factor will be returned.
When mixing ODEs and linCmt() models, the linCmt() compartments are 1 and possibly 2 instead of right after the last internal ODE. This is more aligned with how PK/PD models are typically defined.
EVID=3 and EVID=4 now (possibly) reset time as well. This occurs when the input dataset is sorted before solving.
When EVID=2 is present, an evid column is output to distinguish evid=0 and evid=2
Add the ability to order input parameters with the param() pseudo-function
Add the ability to resample covariates with resample=TRUE or resample=c("SEX", "CRCL"). You can resample all the covariates by ID with resampleID=TRUE or resample the covariates without respect to ID with resampleID=FALSE
Comparison of factors/strings is now supported in RxODE; Therefore ID==âStudy-1â is now allowed.
Completion for elements of rxSolve() objects, and et() objects have been added (accessed through $)
Completion of rxSolve() arguments are now included since they are part of the main method
Allow simulation with zero matrices, that provide the simulation without variability. This affects rxSolve as well as rxMvnrnd and cvPost (which will give a zero matrix whenever one is specified)
et() can dose with length(amt) > 1 as long as the other arguments can create a event table.
Rstudio notebook output makes more sense
Printing upgraded to cli 2.0
Caching of internal C data setup is now supported increasing speed of optim code when:
inits do not change (though you can specify them as cmt(0)=... in the model and change them by parameters)Allow while(logical) statements with ability to break out if them by break. The while has an escape valve controlled by maxwhere which by default is 10000 iterations. It can be change with rxSolve(..., maxwhere = NNN)
Allow accessing different time-varying components of an input dataset for each individual with:
lag(var, #)lead(var, #)first(var)last(var)diff(var)Each of these are similar to the R lag, lead, first, last and diff. However when undefined, it returns NA
Allow sticky left-handed side of the equation; This means for an observation the left handed values are saved for the next observations and then reassigned to the last calculated value.
This allows NONMEM-style of calculating parameters like tad:
mod1 <-RxODE({
KA=2.94E-01;
CL=1.86E+01;
V2=4.02E+01;
Q=1.05E+01;
V3=2.97E+02;
Kin=1;
Kout=1;
EC50=200;
C2 = centr/V2;
C3 = peri/V3;
d/dt(depot) =-KA*depot;
d/dt(centr) = KA*depot - CL*C2 - Q*C2 + Q*C3;
d/dt(peri) = Q*C2 - Q*C3;
d/dt(eff) = Kin - Kout*(1-C2/(EC50+C2))*eff;
if (!is.na(amt)){
tdose <- time
} else {
tad <- time - tdose
}
})It is still simpler to use:
mod1 <-RxODE({
KA=2.94E-01;
CL=1.86E+01;
V2=4.02E+01;
Q=1.05E+01;
V3=2.97E+02;
Kin=1;
Kout=1;
EC50=200;
C2 = centr/V2;
C3 = peri/V3;
d/dt(depot) =-KA*depot;
d/dt(centr) = KA*depot - CL*C2 - Q*C2 + Q*C3;
d/dt(peri) = Q*C2 - Q*C3;
d/dt(eff) = Kin - Kout*(1-C2/(EC50+C2))*eff;
tad <- time - tlast
})If the lhs parameters havenât been defined yet, they are NA
Now the NONMEM-style newind flag can be used to initialize lhs parameters.
Added tad(), tad(cmt) functions for time since last dose and time since last dose for a compartment; Also added time after first dose and time after first dose for a compartment tafd(), tafd(cmt); time of last dose tlast(), tlast(cmt) and dose number dosenum() (currently not for each compartment)
Changed linear solved systems to use âadvanâ style linCmt() solutions, to allow correct solutions of time-varying covariates values with solved systems; As such, the solutions may be slightly different. Infusions to the depot compartment are now supported.
Added sensitivity auto-differentiation of linCmt() solutions. This allows sensitivities of linCmt() solutions and enables nlmixr focei to support solved systems.
C++14When calculating the empirical Bayesian estimates for with rxInner (used for nlmixrâs âfoceiâ) ignore any variable beginning with rx_ and nlmixr_ to hide internal variables from table output. This also added tad=tad() and dosenum=dosenum() to the ebe output allowing grouping by id, dose number and use TAD for individual plot stratification.
Added ability to prune branching with rxPrune. This converts if/else or ifelse to single line statements without any if/then branching within them.
Added ability to take more complex conditional expressions, including:
ifelse(expr, yes, no)x = (x==1)*1 + (!(x==1))*2if (logic){ expr} else if (logic) {expr} else {}. The preferred syntax is still only if/else and the corresponding parsed code reflects this preference.
ifelse is not allowed as an ODE compartment or a variable.Switched to symengine instead of using sympy
sympy, though some functions in sympy are no longer accessible.Added new ODE solving method âindLinâ, or inductive linearization. When the full model is a linear ODE system this becomes simply the matrix exponential solution. Currently this requires a different setup.
Added arbitrary function definition to RxODE using rxFun
rxD. When taking deviates without a derivative function, RxODE will use numerical differences.Will error if RxODE does not know of a function that you are trying to use; This could be a breaking change. Currently:
math.h are supportedrxFun and rxDAdded NA, NaN, Inf and +Inf handling to a RxODE model. Can be useful to diagnose problems in models and provide alternate solutions. In addition, added R-like functions is.nan, is.na, is.finite and is.infinite which can be called within the RxODE block.
Allowed the following data variables can be accessed (but not assigned or used as a state):
cmtdvidaddlssamtrateid which requires calling the id as factor ID=="1" for instance.Kept evid and ii as restricted items since they are not part of the covariate table and are restricted in use.
Added the following random number generators; They are thread safe (based on threefry sitmo and c++11) and your simulations with them will depend on the number of cores used in your simulation (Be careful about reproducibility with large number of threads; Also use parallel-solve type of RxODE simulations to avoid the birthday problem).
During ODE solving, the values of these are 0, but while calculating the final output the variable is randomized at least for every output. These are:
rxnorm() and rxnormV() (low discrepancy normal)rxcauchy()rxchisq()rxexp()rxf()rxgamma()rxbeta()rxgeom()rxpois()rxt()rxunif()rxweibull()In addition, while initializing the system, the following values are simulated and retained for each individual:
rinorm() and rinormV() (low discrepancy normal)ricauchy()richisq()riexp()rif()rigamma()ribeta()rigeom()ripois()rit()riunif()riweibull()Added simeta() which simulates a new eta when called based on the possibly truncated normal omega specified by the original simulation. This simulation occurs at the same time as the ODE is initialized or when an ODE is missing, before calculating the final output values. The omega will reflect whatever study is being simulated.
Added simeps() which simulates a new eps from the possibly truncated normal sigma at the same time as calculating the final output values. Before this time, the sigma variables are zero.
All these change the solving to single thread by default to make sure the simulation is reproducible. With high loads/difficult problems the random number generator may be on a different thread and give a different number than another computer/try.
Also please note that the clang and gcc compiler use different methods to create the more complex random numbers. Therefore MacOS random numbers will be different than Linux/Windows at this time (with the exception of uniform numbers).
These numbers are still non-correlated random numbers (based on the sitmo test) with the exception of the vandercorput distributions, so if you increase the number of threads (cores=â¦) the results should still be valid, though maybe harder to reproduce. The faster the random number generation, the more likely these results will be reproduced across platforms.
Added the ability to integrate standard deviations/errors of omega diagonals and sigma diagonals. This is done by specifying the omega diagonals in the theta matrix and having them represent the variabilities or standard deviations. Then these standard deviations are simulated along with the correlations using the IJK correlation matrix (omega dimension < 10) or a correlation matrix or Inverse Wishart-based correlation matrix (omega dimension > 10). The information about how to simulate this is in the variability simulation vignette.
Now have a method to use lotri to simulate between occasion variability and other levels of nesting.
Added lower gamma functions See Issue #185
Upgraded comparison sort to timsort 2.0.1
Changed in-place sort to a modified radix sort from data.table. The radix search was modified to:
Work directly with RxODE internal solved structures
Assume no infinite values or NA/NaN values of time
Always sort time in ascending order
Changed sorting to run in a single thread instead of taking over all the threads like data.table
Changed method for setting/getting number of threads based on data.tableâs method
Added function rxDerived which will calculate derived parameters for 1, 2, and 3 compartment models
More descriptive errors when types of input are different than expected
Moved many C functions to C++. CRAN OpenMP support requires C++ only when C and C++ are mixed. See:
https://stackoverflow.com/questions/54056594/cran-acceptable-way-of-linking-to-openmp-some-c-code-called-from-rcpp
No longer produces C code that create the model variables. Instead, use qs to serialize, compress and encode in base91 and then write the string into the C file. The qs package then decodes all of that into the model variables. This also increases the compilation speed for models in RxODE.
Pre-compile RxODE headers once (if cache is enabled), which increases compilation speed for models in RxODE
RxODEâs translation from the mini-language to C has been refactored
Occasionally RxODE misidentified dual lhs/param values. An additional check is performed so that this does not happen.
For solved matrices with similar names (like âtaddâ and âtadâ) RxODE will now prefer exact matches instead of the first match found when accessing the items with $tad.
A fix where all ID information is kept with keep=c(""..."")
Transit compartment models using the transit ODE or variable are now allowed. Also check for more internally parsed items (see Issue #145).
Bug fix for etSeq and etRep where greater than 2 items were mis-calculated
ggplot2 3.3.0NAs in RxODE datasetNEWS.md file to track changes to the packageRetroSearch is an open source project built by @garambo | Open a GitHub Issue
Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo
HTML:
3.2
| Encoding:
UTF-8
| Version:
0.7.4