RetroSearch Browse

Showing content from http://arm-software.github.io/CMSIS_5/Driver/html/groupnandcontrol__codes.html below:

Specify operation modes of the NAND interface. More...

Macros #define ARM_NAND_BUS_MODE   (0x01UL) Set Bus Mode as specified with arg. More...
#define ARM_NAND_BUS_DATA_WIDTH   (0x02UL) Set Bus Data Width as specified with arg. More...
#define ARM_NAND_DRIVER_STRENGTH   (0x03UL) Set Driver Strength as specified with arg. More...
#define ARM_NAND_DEVICE_READY_EVENT   (0x04UL) Generate ARM_NAND_EVENT_DEVICE_READY; arg: 0=disabled (default), 1=enabled. More...
#define ARM_NAND_DRIVER_READY_EVENT   (0x05UL) Generate ARM_NAND_EVENT_DRIVER_READY; arg: 0=disabled (default), 1=enabled. More...
Description

Specify operation modes of the NAND interface.

These controls can be used in the function ARM_NAND_Control for the parameter control.

Macro Definition Documentation #define ARM_NAND_BUS_MODE (0x01UL)

Set Bus Mode as specified with arg.

#define ARM_NAND_BUS_DATA_WIDTH (0x02UL)

Set Bus Data Width as specified with arg.

#define ARM_NAND_DRIVER_STRENGTH (0x03UL)

Set Driver Strength as specified with arg.

#define ARM_NAND_DEVICE_READY_EVENT (0x04UL)

Generate ARM_NAND_EVENT_DEVICE_READY; arg: 0=disabled (default), 1=enabled.

#define ARM_NAND_DRIVER_READY_EVENT (0x05UL)

Generate ARM_NAND_EVENT_DRIVER_READY; arg: 0=disabled (default), 1=enabled.

RetroSearch is an open source project built by @garambo | Open a GitHub Issue

Search and Browse the WWW like it's 1997 | Search results from DuckDuckGo

HTML: 3.2 | Encoding: UTF-8 | Version: 0.7.4